Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Line Step Ups Broken or Fixed?

profile picture
afterchrisbangs
Posts: 10 - Karma: 22
I recently took my twin tips to see of they could be fixed because the tip of he ski's base, metal edge, and the top have come apart. I was wondering if anyone has had that happen to them or if they know I it could be repaired?
Feb 13 2013 11:28PM
2 0
profile picture
LukasSchroeder
Posts: 1460 - Karma: 2,683
Correct me if im wrong but.... Im Pretty sure delams (think thats what happend) are a popular problem on line skis.
Feb 14 2013 12:03AM
0 0
profile picture
TOUCHE
Posts: 1183 - Karma: 162
This happened to a pair of my skis and you dont exactly use the edge right at the tip, so i just cut it out and filed the corner neatly and had no further worries. although over time the base will peel a little bit.

Click for larger image
Feb 14 2013 2:37AM
0 0
profile picture
TOUCHE
Posts: 1183 - Karma: 162
forgot to mention I got it professionally put back in with resin and all first but it came back out a week later anyway
Feb 14 2013 2:38AM
0 0
profile picture
FreeVillain
Posts: 747 - Karma: 260
It's called a Delam you can first put epoxy in between the base and top sheet and clamp it for a few days and if that doesn't work just go to a shop.
Feb 14 2013 6:35AM
0 0
profile picture
SloanKettering
Posts: 691 - Karma: 465
Happened to my friends masterminds. The base split away from the tip. He didnt fix it and eventually it split all the way down hal of his ski and had to get afterbangs
Feb 14 2013 6:41AM
0 0
profile picture
Wacobs
Posts: 7 - Karma: 552
Theres only one good solution: DUCK TAPE ;)
Feb 14 2013 7:36AM
0 0
profile picture
Joonas
Posts: 568 - Karma: 230
Happened to my step ups too, just put epoxy in between, then rivet them together, if u use epoxy only, it will eventually come apart. If you dont have rivets or a gun to do it, what i did is, i just put some skate screws trough with some epoxy, then cut the excess part off, has held as good as the rivets, and since its on the tip, they wont get on the way, even on the hardest butters.
Feb 14 2013 8:09AM
0 0
profile picture
afterchrisbangs
Posts: 10 - Karma: 22
Where'd you get the skate screws? And did you have the ski shop repair it or did you do it?
Feb 14 2013 10:59PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
If you're doing the skate hardware thing, you'd be better off getting truss head bolts, like this

Click for larger image

The pan head on a skate screw will dig in to the base/topsheets, depends on where you put it. I mean, it probably won't be a huge difference, but at least to me it seems like a better idea for no additional cost.
Feb 14 2013 11:06PM
0 0
profile picture
first_rodeo
Posts: 2385 - Karma: 7,781

i couldnt pass up on a deal for 2012 salomon threats i liked

i rode them like my armada thalls..........few hippie killers and now i have the same problem

ive never had a single delam with armada or line.   salomon rossi and k2 however (-k)

Feb 14 2013 11:33PM
0 0
profile picture
OG_Loc
Posts: 428 - Karma: 2,085
epoxy then rivets, this just happened to my step ups and i plan on fixing them with this method
Feb 15 2013 3:24AM
0 0
profile picture
Joonas
Posts: 568 - Karma: 230
Some leftovers from my broken skateboard trucks.. And i did it myself, took like 2 minutes, all you need is a drill to make the holes.
Feb 15 2013 8:05AM
0 0
profile picture
afterchrisbangs
Posts: 10 - Karma: 22
I'm going to try and fix it tomorrow. Do you drill the holes before or after the epoxy? And was it hard to get the holes drilled?
Feb 17 2013 12:58AM
0 0
All times are Eastern (-5)