Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What to do if you get baseburn?

profile picture
FatWhore
Posts: 2213 - Karma: 1,098
I think I waxed a little to hot the other day, as every time I ride after a good wax the base has patches of white areas with no wax on them. I think I might be preparing my base for the wax wrong, to start with, so it might be that and not base burn.
*Will a simple Base Grind fix baseburn?
Feb 7 2013 4:21PM
1 0
profile picture
C_Perin
Posts: 944 - Karma: 156
A base grind will do the job. But it might take more grinding then your average tune does. If it is really bad then you might be screwed and a grind will not fix it
Feb 7 2013 4:47PM
0 0
profile picture
rednecknation
Posts: 548 - Karma: 63
The wax might not be adhering to the base of your ski right. Are your skis room temperature or warm when you wax them? And I have a similar question/problem. My skis tend to get a white powdery type look to the bases, almost flakey. It's because they are dry and need wax right? I don't wax my skis.
Feb 7 2013 4:48PM
0 0
profile picture
Pikachu.
Posts: 1290 - Karma: 1,641
yea that means your bases are dry. You should really wax them though, it helps a ton
Feb 7 2013 4:51PM
0 0
profile picture
liukangkid
Posts: 3323 - Karma: 82
Is your ski base level? you may just be missing a part of your ski which would lead to it still being chalky and white. And yes if your ski base needs to be waxed it will start to look white and flaky almost like dry skin.
Feb 7 2013 5:03PM
0 0
profile picture
d00d
Posts: 2687 - Karma: 7,086
Had this happen to 2 brand new skis from LINE and K2 after about 1-2 uses. All you need is a good waxing every so often. Go out and buy and good waxing iron for like around $80 with the wax, it's worth it. Also I've noticed that this happens often when you have a ski that has a see through base with a graphic design under it unlike other skis that are mostly black as the base.
Feb 7 2013 5:05PM
0 0
profile picture
rednecknation
Posts: 548 - Karma: 63
Yup I have the LTC Anthems. And that is what the base is, see through graphic. I've been using them since about the whole season and haven't waxed them. And thanks for the information guys.
Feb 7 2013 5:13PM
0 0
profile picture
FatWhore
Posts: 2213 - Karma: 1,098
Thanks for the reply, and yeah i was thinking about that, but im going to try waxing one more time and making sure its at room temp, and then taking alittle more wax off.
Feb 7 2013 5:16PM
0 0
profile picture
FroesenSkeeze
Posts: 638 - Karma: 673
Well, I have the LINE TC's too, and I get slightly white edges after a day of riding on a fresh wax. I make sure the iron isn't smoking hot either, so not sure what is up. Should my edges be white after one day on a wax?
Feb 7 2013 5:17PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
The white powder look also seems to depend on what type of base it is. My chronics, which I believe have a sintered base of some sort, don't show that nearly as quickly as my brothers skis with extruded bases. And we both wax them about the same frequency.
Feb 7 2013 5:37PM
0 0
profile picture
scarsimd
Posts: 668 - Karma: 773
yup, i had Line Abangs and they had this same thing and now i have got the k2 Domain it is also happening! so annoying
Feb 7 2013 5:50PM
0 0
profile picture
d00d
Posts: 2687 - Karma: 7,086
I hope you're talking about bases not edges...

But no that should not happen after one day. Make sure you're using the right wax (including the temp the wax is meant for) and that you're covering the entire base with wax. I've missed spots before and then I'll notice it the next time I go skiing those spots turn white again quickly.

I went a whole year with base burn because I didn't know anything about it last year, and it sucks on dem pow days.
Feb 7 2013 5:52PM
0 0
All times are Eastern (-5)