Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Shot Ski

profile picture
Motes
Posts: 1840 - Karma: 90
 Just got the binders of some old rossi race skis and planning on making a shot ski with my roomates.  Anyone else do this, whats the best way to mount the shot glasses on.  We were thinking about cutting circles in the top sheet, sanding and then putting the shot glasses on with krazy glue.  Ill put some pics up when its completed...
Feb 4 2013 5:52PM
10 0
profile picture
theabortionator
Posts: 51623 - Karma: 162,059
Have all your friends jerk off into a bowl, mix in 2 cups of flower, a cup of water, and table spoon of tears and it makes the strongest glue known to man.
Feb 4 2013 5:54PM
4 0
profile picture
yuck
Posts: 8384 - Karma: 2,090
ive always just wiped the skis down and glued shot glasses right onto the topsheets. plastic sticks way better than glass by the way

if you dont care what it looks like, just tape em on and it will survive a while
Feb 4 2013 5:55PM
0 0
profile picture
Sklar
Posts: 8864 - Karma: 31,612
Rough up the bottom of the glasses and the topsheets, i used epoxy and it's still holding strong
Feb 4 2013 6:01PM
0 0
profile picture
AT-AT
Posts: 3281 - Karma: 3,256
Shotskis are dope.
my lady friend made me one for christmas, its awesome.
Feb 4 2013 6:04PM
0 0
profile picture
theabortionator
Posts: 51623 - Karma: 162,059
A good 2 part epoxy will easily lock anything like that solid. You're talking about a shot glass that weighs shit and epoxy that holds some fucking shit.


I still like the jizz and tears homemade glue.
Feb 4 2013 6:10PM
1 0
profile picture
corona
Posts: 12795 - Karma: 32,747
I have one. holes drilled right through it. works great.


Click for larger image
Feb 4 2013 6:24PM
0 0
profile picture
accualyisdolan
Posts: 3295 - Karma: -192
Overkill. Epoxy is insane that's all you need
Feb 4 2013 6:28PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
this, it means you can clean the glasses and use normal shotglasses without buying extra
Feb 4 2013 6:32PM
0 0
profile picture
ILLinoisance
Posts: 3527 - Karma: 5,398
Everyone takes the shots at once by tipping the ski. One person to each shot glass. Usually 3-5 glasses depending on how big the ski is.
Feb 4 2013 6:36PM
0 0
profile picture
Pancake_Fucker
Posts: 1842 - Karma: 1,909
I have an ancient cross country ski. Just used some industrial glue and I am sure that the glasses will break before the glue lets go.
Feb 4 2013 6:38PM
0 0
profile picture
theblackrod
Posts: 2162 - Karma: 575
this. this. this.
Feb 4 2013 7:48PM
0 0
profile picture
volvotom
Posts: 2045 - Karma: 712
I remember powder or TGR wrote an article about how to do it. Try searching there.
Feb 4 2013 8:46PM
0 0
profile picture
SamtheEagle
Posts: 1658 - Karma: 713
5 minute epoxy works great
Feb 5 2013 2:48AM
0 0
profile picture
Barefootin_Fiend
Posts: 7618 - Karma: 4,727
dude, just use super glue. i've made 4 shot skis half drunk with nothing more than random shot glasses, a bottle of super glue, and an old ski. and I've never had a shot glass come off.
Feb 5 2013 3:12AM
1 0
profile picture
pat_in_the_hat
Posts: 3019 - Karma: 2,695
dont glue them. they are imposible to clean (especially since you will be doing it hungover) and they tend to break easier when they are glued. Do what someone else said just cut inch and a half or 2 inch holes in the ski, (depending on the size of your glasses). the glasses will fit right in there and stay still until you dont want them too. Plus, if youre already pretty fucked up, you can take the glasses out of the ski to pour them.

From experience, this is the best.
Feb 5 2013 12:52PM
0 0
profile picture
ILLinoisance
Posts: 3527 - Karma: 5,398
anyone know a good space in between each glass on center? looking to make a triple ski to fit 16 people.
Mar 13 2013 9:11PM
0 0
profile picture
DockEllis
Posts: 1131 - Karma: 1,745
The bar I worked at had the sickest shot ski ever, it looked like this:

Click for larger image

The shot glasses were attached using a little ski binding, you would release the heel (like tele or AT bidings) and the boot would slide out. People would be hammered and forget to lock the binding down and when they took the shot it would swing down and hit them in the face, which was halarious.
Mar 13 2013 9:35PM
1 0
profile picture
n_b
Posts: 580 - Karma: 68
i just gorilla glued mine..its working out fine so far!...only sucks to clean
Mar 13 2013 9:40PM
0 0
profile picture
tripnip
Posts: 1882 - Karma: 482
some kind soul should make a good video
Mar 13 2013 9:46PM
0 0
profile picture
412.
Posts: 1050 - Karma: 247
Go to Home Depot or Lowes and find a product called "Liquid Nails"
Mar 13 2013 9:54PM
0 0
profile picture
.MintBerryCrunch
Posts: 750 - Karma: 346
I've been through a few shot skis, and the super glue method definitely works, but I've found that the best way is just to use circular Velcro, which makes it a LOT easier to clean the glasses since they are removable.
Mar 13 2013 9:56PM
1 0
profile picture
C.Wood
Posts: 2524 - Karma: 180
I made mine with three shot glasses, here's the steps:

-bought three shot glasses
-measured diameter of shot glass(approximately)
- found a holesaw for a drill slightly larger than glass diameter
-spaced out three holes along length of ski
-drilled out using the hole saw.
-sanded and painted desired design(optional)
-wrapped the glasses with electrical tape so that you push and turn the glass into the hole so it stays there. this allows the glasses to be removable so that you can wash them easily
Mar 14 2013 10:37AM
0 0
profile picture
bo0b
Posts: 2964 - Karma: 996
I prefer the mug snowboard. You glue mugs onto a snowboard, fill them with beer, and all chug them. Funny results when you match up really fast drinkers with really slow ones.
Mar 14 2013 10:47AM
0 0
profile picture
Twinjibber77
Posts: 6239 - Karma: 2,354
I was originally thinking ski shot as well but after reading the mugs on a snowboard thing i think i will try to get those on an OG pair of Rossi Scratches i just took bindings off for this exact purpose. Anyone try attaching something bigger than a shot class to skis?
Also someone i know found one at a bar that has the shot glasses mounted but they have like some sort of plastic coating connecting them to the skis so if you drop it or something they can't break off.

Fully intend on making the mugs ski as sort of a one time use thing for this weekend and then smashing the fuck out of the glasses when the party gets too reckless.
Mar 14 2013 11:08AM
0 0
profile picture
Twinjibber77
Posts: 6239 - Karma: 2,354
Click for larger image
Mar 14 2013 11:08AM
0 0
profile picture
powderdrunkie
Posts: 2034 - Karma: 976
epoxy has worked for us

Click for larger image
Mar 14 2013 2:08PM
0 0
profile picture
s_a_m
Posts: 916 - Karma: 58
I made one once for a friends birthday present. I found that the best way to do it is drilling holes, not gluing. Good luck, theyre a hell of a good time
Mar 14 2013 2:11PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Epoxy a binding screw under each shot glass and sink heli coils into the ski.
Mar 14 2013 2:26PM
0 0
All times are Eastern (-5)