Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

HELP NEEDED broken skis (pics)

profile picture
J_MAC
Posts: 572 - Karma: 127
title says it all... was ridin for the day and when i checked em tonight i saw this:

Click for larger image
Click for larger image
Click for larger image

any ideas on how one would go about repairing this? home fix up preffered
Feb 3 2013 5:11PM
2 0
profile picture
freeskibrian
Posts: 23 - Karma: 24
you need new skis my friend
Feb 3 2013 5:13PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
well they're obviously pretty fucked, as in they are unlikely to last after this season, advice, lots of epoxy, clamps and seeing as its the tips you may be able to screw it together with countersunk holes though i'm not sure
Feb 3 2013 5:15PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
on second thoughts it probably isn't worth the effort though so i'd start looking for some more skis
Feb 3 2013 5:17PM
0 0
profile picture
loganimlach
Posts: 5132 - Karma: 14,054
epoxy and clamp it then after it's cured pop some rivets through there
Feb 3 2013 5:18PM
0 0
profile picture
E-Nix
Posts: 382 - Karma: 187
Duct Tape.
Feb 3 2013 5:37PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
this sounds a bit better, see if you can find a rivet gun to borrow
Feb 3 2013 5:57PM
0 0
profile picture
array.
Posts: 2439 - Karma: 202
rivet that puppy up
Feb 3 2013 5:57PM
0 0
profile picture
J_MAC
Posts: 572 - Karma: 127
THIS awesome, now where the hell do i find a rivet gun
Feb 3 2013 6:08PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
school, tool rental, local mechanic?
Feb 3 2013 6:10PM
0 0
profile picture
JAHpow
Posts: 7282 - Karma: 17,175
Basically any department store. They're pretty inexpensive. If you're using pop rivets make sure the flat part is towards the ground so they don't catch on anything.
Feb 3 2013 6:19PM
0 0
profile picture
Chubz.
Posts: 13918 - Karma: 25,661
the outside of your house looks really nice. OP i dig your house.
Feb 3 2013 6:32PM
0 0
profile picture
J_MAC
Posts: 572 - Karma: 127
i was lookin in my basement annd.... I have afucking rivet gun.. SWeeet
Feb 3 2013 7:11PM
0 0
profile picture
TNORTS
Posts: 2076 - Karma: 2,754
I see no problem.
Feb 3 2013 7:16PM
0 0
profile picture
90053
Posts: 2565 - Karma: 3,728
haha thats sick, use marine epoxy as it is flexible and obviously smaller rivets, post pics as well, gd luck
Feb 3 2013 7:25PM
0 0
profile picture
jermhy
Posts: 119 - Karma: 619
i've had the same issue before and this works. My dad works with fiberglass too, so I fiberglassed over everything after riveting it. it held up long enough for me to find new skis
Feb 3 2013 9:37PM
0 0
profile picture
No.Quarter
Posts: 5257 - Karma: 16,962
you can get a rivet gun for like 10 bucks at home depot or probably anyone you know who is at all a handyman will probably have one

After you pop the rivets, carefully flatten the bulge end by either clamping down on them really hard with a nice big pair of pliers or tapping on them with a metal hammer. You really don't have to flatten them, but if your pilot hole is a little bit too big it just adds a bit of extra security
Feb 3 2013 9:49PM
0 0
profile picture
corona
Posts: 12795 - Karma: 32,747
I've done this before. one thing to note is it's really really really worth the time and effort to shape 2 blocks of wood to the right curve of the tip and clamp it between them. If you have the resources to do that without carving them with a knife.
Feb 3 2013 9:56PM
0 0
All times are Eastern (-5)