Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I broke my dad's mountain bike, help please

profile picture
t.dough
Posts: 413 - Karma: 1,090
This morning I wanted to go to the lake/get some exercise so I grabbed my dad's bike (I don't know why I didn't grab mine) and rode there. On the way back I was pedaling up a hill and the rear gears started grinding and the wheel stopped turning. I thought the chain had just come off but when I got off the bike I realized that the entire rear derailleur had snapped off and got tangled up in the spokes. I carried the bike to the house and found out that the thing holding the derailleur on had bent. No idea how it happened but it did. Sorry for the shitty pictures.
Click for larger image
Here it is from the side, you can't really see it's bent but it gives you more of an idea of what the piece is. It's the thing on the far right.
Click for larger image
Now my question: Is that one little piece replaceable? Or would I have to buy a whole fork?
Aug 2 2012 8:06PM
0 0
profile picture
TACO-DOG.exe
Posts: 11988 - Karma: 12,261
he's going to beat you
Aug 2 2012 8:08PM
0 0
profile picture
jmasterp
Posts: 1976 - Karma: 233
Get fulltilts.
Aug 2 2012 8:08PM
0 0
profile picture
Italian.Stallion
Posts: 564 - Karma: 101
It looks like you broke the derailleur hanger. Just bring it to a shop that sells the same brand as your bike, and ask them. They are usually pretty cheap.
Aug 2 2012 8:09PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
your hanger for your derailleur snapped and then when you pedalled or shifted it got pulled into the spokes.

you will probly need a new rim/spokes, hanger, and derailleur if they are super bent.
Aug 2 2012 8:09PM
0 0
profile picture
Parks.
Posts: 5612 - Karma: 1,093
most likely this
Aug 2 2012 8:09PM
0 0
profile picture
powderdrunkie
Posts: 2034 - Karma: 976
i think you're just missing the rear wheel...
Aug 2 2012 8:10PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
The rim and spokes are fine, but why a new derailleur? It doesn't look like there's any damage to it itself... then again I know nothing about bikes...
Aug 2 2012 8:11PM
0 0
profile picture
EricaMN.
Posts: 2704 - Karma: 347
...?

you said that it snapped off
Aug 2 2012 8:13PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
Well I mean in came off... poor choice of words maybe? Is the derailleur part of the hanger or are they separate pieces? Go easy on me guys, I'm ignorant.
Aug 2 2012 8:15PM
0 0
profile picture
Static
Posts: 8543 - Karma: 4,162
if its just the hangar thats no big deal they are inexpensive
Aug 2 2012 8:15PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
they are usually separate pieces but usually they get bent when that happens the derailleur gets bent but if not then you will probly just need at adjustment to get it shifting again.
Aug 2 2012 8:18PM
0 0
profile picture
EricaMN.
Posts: 2704 - Karma: 347
Okay if it was just the hanger, then go to your local bike shop, buy a new one for around 10 bucks, and re-thread the chain. Also, look around in your garage for something that looks like this so that you can re-thread properly
Click for larger image
Aug 2 2012 8:22PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
Thanks! If the derailleur IS bent, is there a specific one I should be looking at? The possibly-broken one appears to be a shimano deore xt (it also says "integrated 8sis," not sure if that's part of the name). Are there specific ones I should avoid? I'm sure a bike shop would help me out but the nearest one is 45 minutes away...

RuggyRo, thanks for your help too. I actually have one of those sitting in my room, I was never really sure what it was...
Aug 2 2012 8:34PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
If it's just a little bent then stick it in a vice and take some pliers and pull it back, but if it's completely fucked then go buy the same one that was on the bike before hand.
Aug 2 2012 8:39PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
Here's the derailleur... Again with the shitty pictures but maybe someone could tell if it was bent? Again, I'm super sorry for my ignorance.
Click for larger image
Click for larger image
Aug 2 2012 8:46PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
You have to hold it the way it was hanging to tell if the bottom cogs are bent or not, the sideways pictures won't show anything.
Aug 2 2012 8:52PM
0 0
profile picture
bdarb207
Posts: 3057 - Karma: 438
If it is broken youde want to determine if it is rapid rise or not (correct me if I'm wrong) and just make sure it is 8 spd again. Xt is fairly high end components just to let you know. That's probably like a fifty dollar part but it looks a bit older so could be harder to find. New probably like 85-100. I haven't rode in a while this could all be shinanagans.
Aug 2 2012 8:59PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
This one's a bit blurry
Click for larger image
This one's not...
Click for larger image
If you need I'll take better pictures but it'll be tomorrow.
Aug 2 2012 9:10PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
It doesn't look to be in that bad of shape but you will need to get that chain back on there. Once you get a hanger put it on and try to shift gears and if it does shift properly then you're good but if not then get it adjusted or buy a new one.
Aug 2 2012 9:15PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
Awesome! Any specific hanger? They all seem pretty similar in price/quality
Aug 2 2012 9:35PM
0 0
profile picture
TRASHY.
Posts: 736 - Karma: 356
Most derailleurs will have certain hangers for them but it depends. I'm not sure if the lower end derailleurs all use a universal hanger because there isn't much difference but i would call the shop and ask to make sure.
Aug 2 2012 9:50PM
0 0
profile picture
Bonzalo
Posts: 2593 - Karma: 1,812
Get that shit fixed and tell your dad, is not like he is going to cut your balls or anything.
Aug 2 2012 9:52PM
0 0
profile picture
t.dough
Posts: 413 - Karma: 1,090
Bahaha I'm not worried about it, he knew before I made the thread. He just asked me to figure out what the broken parts were and replace them.
Aug 2 2012 9:59PM
0 0
profile picture
Backyard.Skier
Posts: 5397 - Karma: 1,497
damn girl how you know so much about bikes?!
Aug 2 2012 10:04PM
0 0
profile picture
Bonzalo
Posts: 2593 - Karma: 1,812
oh you seemed worried hahahah
Aug 2 2012 10:06PM
0 0
profile picture
bdarb207
Posts: 3057 - Karma: 438
I think the hanger may be specific to frame maker if not at least age. How old is the bike?
Aug 2 2012 10:27PM
0 0
profile picture
theabortionator
Posts: 51514 - Karma: 160,924
This won't help you in anyway but I broke this homeless alcoholic guys bike at the bar one night a few years back.


Was pretty drunk and someone was trying to get me to do a wheelie. I was doing some wheelies back and forth on it. Then decided to try to come out from the parking lot and launch off the lip into the road and do a 360. Never got more than 270. After a couple of those landing sideways going fast and eating shit I bent the wheel all fucked up I guess. It wouldn't ride. Me and this other guy bent it back, thought it was good enough.


Felt bad and gave him some money for it another day even though he'd gotten it fixed for free. Dude was so drunk he didn't remember me giving him money though. I was like wtf man.


Oh well.

Cool story hansel, don't fuck with peoples bikes I guess.
Aug 2 2012 10:34PM
0 0
profile picture
bleevus
Posts: 1308 - Karma: 2,048
Always the answer
Aug 2 2012 11:34PM
0 0
All times are Eastern (-5)