Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Dalbello Krypton Rampage ID
Posts: 1381
-
Karma: 142
anyone know where i can find a size 26? ive been looking nonstop and cant find any! it seems there's only 25.5s and 26.5s but i really need a 26 so any help would be appreciated. thanks
Posts: 52
-
Karma: 15
Posts: 533
-
Karma: 59
obviously you havent tried them on so i would reccomend trying them on and seeing what size fits
Posts: 1381
-
Karma: 142
i actually got fitted for this boot so i have tried it on.
Posts: 2121
-
Karma: 345
26 and 26.5 are the exact same shell and liner. the only difference is the thickness of the baseboard... I might be using the wrong word there. But, basically, any bootfitter can swap the pieces to convert a 26 to 26.5 and vice versa. The bootfitter I go to doesn't even bother buying half sizes.
I measure to a 28 on my left foot, 27 on my right, and ended up buying a 25 boot haha. Best decision I've ever made.
Posts: 2695
-
Karma: 2,535
You don't get foot cramps?
Posts: 2121
-
Karma: 345
nope. they're nearly impossible to get on if the boot's the slightest bit cold, but are absolutely golden once i'm skiing.
it just takes a couple strong heel kicks to get my heel back in the pocket and the boot fitting properly. i've also got custom footbeds, intuitions, and a couple boot punches that make it all work.
Posts: 1381
-
Karma: 142
Bump there is a difference in the liner not the baseboard and still can't find them in a 26. +++++k for help
Posts: 10888
-
Karma: 2,184
and you didn't buy it, why?
Posts: 6704
-
Karma: 11,270
The liner maybe lasted (shaped, not thickness) slightly differently but once you heat mold the liner, any difference the company claims to have made between the whole and half size will vanish.
If you can find the 26.5, just buy it, have it meat molded, and then you'll be good to go.
Posts: 1381
-
Karma: 142
So even though the liner is about 4mm shorter in the 26 than the 26.5 will it make a difference. - sorry Im not making sense I'm super tired
Posts: 2434
-
Karma: 1,977
evo has them im pretty sure
Posts: 6704
-
Karma: 11,270
Production tolerances alone are about 2-3mm, so it won't be a noticeable thing.
When you heat mold an Intuition liner it becomes really soft and you can make them stretch out over 10mm pretty easily. You'll have no issues.
Posts: 1381
-
Karma: 142
Thanks man you're already 10/10 haha
All times are Eastern (-5)
