Unfiltered | Elizabeth Gerritzen X Faction Skis

Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What is the best ISO to shoot at for 60d?

profile picture
SkiJay.
Posts: 1550 - Karma: 653
What is the best ISO to shoot at with the 60d?

I've been researching and i cant seem to find the answer i'm looking for.
Can someone please explain to me native ISO and what it means? Ive read that some people think that shooting at multiples of 100 is better while others say multiples of 160 are better. And ISOs like 125 and 250 are "stretched" and "pulled". Can someone explan what this means? Thanks!
May 14 2012 2:13AM
0 0
profile picture
eheath
Posts: 61677 - Karma: 123,836
160 always unless you absolutely need to boost it up.
May 14 2012 2:32AM
0 0
profile picture
Downtofilm
Posts: 6896 - Karma: 20,395

May 14 2012 2:44AM
0 0
profile picture
tombu
Posts: 138 - Karma: 69
I've read about these iso's and it seems like for canons it goes like this:
iso 100,200,400,800..= best dynamic range
160,320,640..= best noise performance
May 14 2012 10:07AM
0 0
profile picture
[J_Gasper]
Posts: 2983 - Karma: 1,594
You need ML to shoot native ISO with the canon EOS series. But yea, use 160, 320 etc
May 14 2012 10:17AM
0 0
profile picture
TijmenDal
Posts: 4849 - Karma: 1,296
You're right.

100 and it's increments are native ISO's; this is where ISO's perform best.
160 etc are all native ISO -1/3 stop. So for example, ISO 160 is native ISO 200 - 1/3 stop = ISO 160.
The native ISO - 1/3 stop are the ISO's with the lowest noise, but also the least dynamic rang (which is quite logical).

You also have native ISO + 1/3 stop, like 250 or so. Avoid those. They're total crap.
May 14 2012 11:05AM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
This is only for video though, right? For photography I don't think it matters, I usually shoot at 200, I find my 60d performs better (DR, Colour, overall IQ) at 200 than 100 for photo, never shot at 160. And then I use usually use the native ISO's as I go up.
May 14 2012 1:33PM
0 0
profile picture
BolderPro
Posts: 767 - Karma: 426
threads

May 15 2012 6:27PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
So I did some more research and it actually does matter if your shooting JPEG (I have no idea why you would unless your shooting burst), for RAW it doesn't matter.
May 15 2012 6:43PM
0 0
profile picture
SkiJay.
Posts: 1550 - Karma: 653
so what about for video? whats the difference between 100, 200, 400, 500, etc and 160, 320, 640, etc?
May 16 2012 2:03AM
0 0
profile picture
juicedrummer11
Posts: 1960 - Karma: 1,331
i usually shoot 160,320 and only seldomly 640 for video on my 60D. i know that 320 is native and the multiples but then again iso isn't something i know a whole lot about as far as DR. i just try and avoid any noise
May 16 2012 1:48PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
Did you even read the thread? The answer to your question is literally only a few post up....
May 16 2012 1:49PM
0 0
profile picture
SkiJay.
Posts: 1550 - Karma: 653
yes, this is my thread. yo said for raw photos, it dosent matter and for jpeg it does. you never said anything about video
May 16 2012 1:59PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
Video is jpeg.
May 16 2012 2:01PM
0 0
profile picture
juicedrummer11
Posts: 1960 - Karma: 1,331
video is h.264
May 16 2012 2:04PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
Okay, that was a little vague. Video records in whatever format like a Jpeg would for photography. RAW is not an image, it's a data file, it allows you to make changes to the file like you would in camera. You can't shoot 'RAW' video. Its kinda complicated but all you really need to know that each ISO will work the same for Jpeg as it will for Video, for RAW it doesn't matter.
May 16 2012 2:09PM
0 0
profile picture
juicedrummer11
Posts: 1960 - Karma: 1,331
yeah thats right, only red's shoot raw video and some others. but yeah those are comparable
May 16 2012 2:44PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
^exactly.
May 16 2012 2:46PM
0 0
profile picture
TaranItUp
Posts: 1313 - Karma: 802
How do you set native ISO's with Magic Lantern? I normally shoot 100 ISO but I want to try 160.
May 16 2012 3:07PM
0 0
profile picture
SkiJay.
Posts: 1550 - Karma: 653
pull up the ML menu, scroll over to the "expo" tab. Highlight the ISO option and click set. then you can scroll through the ISOs using set and the play button. The native ISOs show up in green and the non-native isos show up in yellow. This is on a 60d so im not sure if its different on other cameras
May 16 2012 3:50PM
0 0
profile picture
TaranItUp
Posts: 1313 - Karma: 802
Alright thanks! I will go check it out.
May 16 2012 11:22PM
0 0
profile picture
RockNRollNghtClb
Posts: 2013 - Karma: 2,509
for t2i too?
May 17 2012 11:38PM
0 0
profile picture
zahava
Posts: 7791 - Karma: 12,039
Haha, yes. 7d, 60d, and t2i hav the same sensor and almost exactly the same noise performance.
May 17 2012 11:48PM
0 0
profile picture
eheath
Posts: 61677 - Karma: 123,836
500iso ftw lol
May 18 2012 12:49AM
0 0
profile picture
SkiJay.
Posts: 1550 - Karma: 653
cant tell if serious..
May 18 2012 3:57AM
0 0
profile picture
eheath
Posts: 61677 - Karma: 123,836
for me, a non-canon dslr user, 500 iso is my minimum
May 18 2012 4:02AM
0 0
profile picture
WillStart
Posts: 3955 - Karma: 3,192
.
May 18 2012 5:03AM
0 0
profile picture
S.C
Posts: 3068 - Karma: 2,285
I go without reserve up to 640 on my 5d, and don't have any problem going to 1600 or even 3200 when necessary
May 18 2012 9:12AM
0 0
All times are Eastern (-5)