Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

THE LEDGE: A product created for you!

profile picture
Coalescent
Posts: 4871 - Karma: 2,063
Hi All,

A good friend of my created and engineered "The Ledge". It is a minimal wall mount solution for your personal tablet or phone. Head over to his Kickstarter link to check it out.

You can view the video Matt Stambaugh Media and Optic Rhythm Cinematics created as well below!

Thanks for watching!

http://www.kickstarter.com/projects/rndmdesign/ledge-a-minimal-wall-mount-for-tablets-and-smartph


Apr 8 2012 9:21PM
0 0
profile picture
Peter.
Posts: 23796 - Karma: 13,014
just wondering why someone would spend money on that

isn't the point of phones and tablets to be in your hands?
Apr 8 2012 9:24PM
0 0
profile picture
Lucas
Posts: 4881 - Karma: 1,575
looks like a waste of money

Apr 8 2012 9:24PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
lol an "invention"
Apr 8 2012 9:26PM
0 0
profile picture
Peter.
Posts: 23796 - Karma: 13,014
seriously, 50 bucks for that?
Apr 8 2012 9:27PM
0 0
profile picture
thatsG
Posts: 2567 - Karma: 1,771
That's sweet. I would love to have that next to my bed
Apr 8 2012 9:27PM
0 0
profile picture
chicken
Posts: 6843 - Karma: 2,123
is there anything to stop the tablet from falling off sideways? also what happens if you push to hard near the base? it seems like it would be able to fall off forward.

I can see a few uses for it though.
Apr 8 2012 9:27PM
0 0
profile picture
Benji.
Posts: 1146 - Karma: 88
wow what a great idea...

fucking NOT
Apr 8 2012 9:28PM
0 0
profile picture
feihlination
Posts: 8356 - Karma: 1,084
50$ is a little steep for that. as others have said, when you use the thing, its normally in your hand.

but whatever, worth a try
Apr 8 2012 9:30PM
0 0
profile picture
iFlip
Posts: 4543 - Karma: 19,132
This is a ledge:

Click for larger image

The word you are looking for is "shelf."

Apr 8 2012 9:30PM
0 0
profile picture
Lucas
Posts: 4881 - Karma: 1,575
that is gnarly
Apr 8 2012 9:33PM
0 0
profile picture
BrewskiJr
Posts: 5738 - Karma: 1,478
If I really wanted that, I would take 5 nails and line three up in a line, the one an inch above the line, to the sides.. Would sit my Iphone up on the wall... and it would cost $0.10... instead of $50.
Apr 8 2012 9:35PM
0 0
profile picture
Coalescent
Posts: 4871 - Karma: 2,063
There is silicon inside of the "groove" that will keep the tablet from "sliding" around.

To those who are saying it's expensive, in reality it's not. Do you know how much it costs to get a block of aluminum CNC machined? Probably not, if you do, then great.

I know I use it in my kitchen for cooking/recipe's. Sorry I am older than many of the NS crowd. I also have one near my bed for my phone to charge.

I have uses for it, others will too. Some may like the idea and some may not. It's a way of life.
Apr 8 2012 9:38PM
0 0
profile picture
Radio
Posts: 946 - Karma: 12
It should at least charge stuff, it's literally just a piece of metal.
Apr 8 2012 9:39PM
0 0
profile picture
Coalescent
Posts: 4871 - Karma: 2,063
The iphone ledge is 25.....the tablet ledge is 50.00

Some people want a modern wall mount that is appealing and clean looking. Others like yourself want nails. To each their own.
Apr 8 2012 9:39PM
0 0
profile picture
thatsG
Posts: 2567 - Karma: 1,771
Is there any way to get one before july?
Apr 8 2012 9:40PM
0 0
profile picture
iFlip
Posts: 4543 - Karma: 19,132
I require clarification on this statement. Are you saying that your "way of life" is a shelf?
Apr 8 2012 9:40PM
0 0
profile picture
TheClap.
Posts: 21661 - Karma: 4,116
welcome to the moddern NS, not the same


Deff quality right there, kids wont understand though
Apr 8 2012 9:41PM
0 0
profile picture
Coalescent
Posts: 4871 - Karma: 2,063
Clarification is: some people like items/products/ideas/marketing/advertising and others don't. Can't please everyone.
Apr 8 2012 9:43PM
0 0
profile picture
Flying~Squirrel
Posts: 6494 - Karma: 192
how easy would it be to throw a 2x4 over a table saw and make that "invention" for free? hell you can even sand it and paint it to make it look all contemporary to match your ipad.
Apr 8 2012 9:44PM
0 0
profile picture
Randy_Quench
Posts: 5447 - Karma: 4,343
HOLY SHIT WHERE CAN I GET ONE!

that is exactly what I have been looking for. I ALWAYS need to put my iphone and ipad on the wall, and never knew there was a product for that!
Apr 8 2012 9:46PM
0 0
profile picture
skijunkiedtm
Posts: 9229 - Karma: 61
I was sold until the price, 50 for a block of aluminum? I think I'll make my own out of wood.
Apr 8 2012 9:46PM
0 0
profile picture
corona
Posts: 12794 - Karma: 32,719
I dunno who's machine you're using, but they're ripping you off big time. we have a milling machine that would take at most 20 minutes to make one of those after it's all set up and it's not one of the fancy computer controlled ones that will do them 3 times as fast easy. Are they charging you $300 an hour or something?
Apr 8 2012 9:46PM
0 0
profile picture
AcidKneeDrop
Posts: 890 - Karma: 279
No this is a product created for me....

Click for larger image

Pizza box that turns into plates for your pizza.... That shit cray
Apr 8 2012 9:49PM
0 0
profile picture
BrewskiJr
Posts: 5738 - Karma: 1,478
Click for larger image

Apr 8 2012 9:52PM
0 0
profile picture
AcidKneeDrop
Posts: 890 - Karma: 279
Click for larger image
Apr 8 2012 9:54PM
0 0
profile picture
Coalescent
Posts: 4871 - Karma: 2,063
When you are doing a run that isn't large enough, it costs a decent amount. I helped create the video and I'm helping promote the product. As far as actual costs, he hasn't shown me the exact numbers.

Working a stable job (being a grown-up), to me $25-$50 isn't a bad price. The target market isn't exactly 12-18 year olds. In this case, the parents would be.

The pre-production models are pretty expensive to make due to the fact there are only a handful being made. It's essentially bulk ordering. The more you make, the price decreases. Supply and demand, basic economics. I'm going to assume everyone knows this.

Anyways, for that iphone/tablet tech who wants the most sleek looking wall mount, this may appeal to them. To skiers who want to use nails and wood and save some money, that may work for them too.

With all of that being said, I made the product available for everyone on NS to see. Some will like it and some won't. We hope that you will support it.

Thanks!
Apr 8 2012 9:54PM
0 0
profile picture
NinetyFour
Posts: 8650 - Karma: 13,409
mind = blown

and its so expensive because its CNC machined from aluminium and anodized..... neither are cheap manufacturing process.
Apr 8 2012 9:56PM
0 0
profile picture
corona
Posts: 12794 - Karma: 32,719
good luck with it. there is definitely a market. but a lot of people, myself included, will think it's a bit of a ripoff. especially if one can walk 2 minutes outside to the machine shop and grab a chunk of aluminum and do it themselves. and even get it anodized for practically free. granted, by the time it's all said and done I could have made that much working a job.

run it by stores for retirees like Lee Valley and see if they'll stock it. seems like something they'd love to have.
Apr 8 2012 10:08PM
0 0
profile picture
J_Christoph
Posts: 2519 - Karma: 8,752
quoting for emphasis
Apr 8 2012 10:21PM
0 0
profile picture
bermbuster49
Posts: 7445 - Karma: 90
the people hating on this obviously dont have a tablet



i got an iPad 2 about a week ago, and you can get free movies on it and shit. it would be clutch to have one of those near your bed or wherever you want, shit put one on the wall in front of the shitter, GOLD. haters can fuck off you dont even know
Apr 8 2012 10:28PM
0 0
profile picture
alex=
Posts: 1738 - Karma: 2,835
Asshole? it's just two guys trying to make some dough
Apr 8 2012 10:59PM
0 0
profile picture
MFM
Posts: 842 - Karma: 77
Shit i don't even know about shelfs.
Apr 8 2012 10:59PM
0 0
profile picture
Lucas
Posts: 4881 - Karma: 1,575
Trying to rip you off*
Apr 8 2012 11:14PM
0 0
profile picture
spliff.Life
Posts: 7847 - Karma: 1,549
if i had an iphone of ipad or w.e i would just make one of those out of a piece of hardwood, 50 bucks to put your phone on the wall......
Apr 8 2012 11:21PM
0 0
profile picture
Rafiki
Posts: 3858 - Karma: 2,251
... nightstand
Apr 8 2012 11:21PM
0 0
profile picture
HitTheJim
Posts: 787 - Karma: 399
Your only shot at success with this thing is to get it in Brookstone. People spend massive amounts of money on the dumbest things. For instance my xmas gift to my mom this year http://www.brookstone.com/nap-massaging-bed-rest?bkiid=World_Landing_Page_Massage_Body_Massagers|CategoryWidget|606079p&catId=L2_BodyMassager|L1_Massage I'll never know why I spent $100 on that.
Apr 8 2012 11:24PM
0 0
profile picture
POW-WOW
Posts: 1464 - Karma: 46
The cost is actually fairly cheap. I've used them for engraving and since it's aluminum it should be pretty easy...

I do think it is really expensive though and kind of unnecessary, but I can see it getting more popular if TV and movies become more popular on tablets/smartphones.
Apr 8 2012 11:25PM
0 0
profile picture
GnarNinja
Posts: 660 - Karma: 884
I'll stick to these ledges... Click for larger image
Apr 8 2012 11:25PM
0 0
profile picture
Backyard.Skier
Posts: 5397 - Karma: 1,497
holy fuck. do want
Apr 9 2012 12:52AM
0 0
profile picture
TACO-DOG.exe
Posts: 11988 - Karma: 12,261
if it was made for me it would have more boobs on it.
Apr 9 2012 12:58AM
0 0
profile picture
phreshpow
Posts: 834 - Karma: 133
NOW THERE IS A LEGIT USE

IMO the video & description would have been better if it had more practical applications of the product instead of DOFy shots of it over and over & trying to justify the price by saying it is anodized, CNCed, & made of 6061 aluminum (pretty much standard aluminum) because 25-50 bucks to the target market really isn't that much

Apr 9 2012 1:15AM
0 0
All times are Eastern (-5)