• Forums
  • Gear Talk
  • The Official "Post Pictures of your Custom Ski Poles" thread

Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

The Official "Post Pictures of your Custom Ski Poles" thread

profile picture
rareison
Posts: 10263 - Karma: 219
I will post pics of mine tomorrow. Go!
Feb 27 2012 12:01AM
1 0
profile picture
Blake.P
Posts: 9894 - Karma: 3,585
Dude, they're poles. Does it matter what they look like?
Feb 27 2012 12:04AM
1 0
profile picture
rareison
Posts: 10263 - Karma: 219
Not really, I just wanna see what everyone else did with their poles!
Feb 27 2012 12:05AM
0 0
profile picture
why
Posts: 2064 - Karma: 65
mine are mad ghetto. no baskets, racing grips with the hand cover thingy cut off, really short
Feb 27 2012 1:26AM
0 0
profile picture
Midwestoverdose
Posts: 833 - Karma: 45
Click for larger image
Feb 27 2012 7:53AM
0 0
profile picture
skiRay
Posts: 7558 - Karma: 926
I break too many poles to make custom ones anymore :(
Feb 27 2012 9:54AM
1 0
profile picture
rareison
Posts: 10263 - Karma: 219
here are mine!

Click for larger image



Feb 27 2012 10:07PM
0 0
profile picture
rareison
Posts: 10263 - Karma: 219
stole some rental poles, hammered the grips off, cut them down, hammered the grips back on, and spray painted them.
Feb 27 2012 10:08PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
Click for larger image
Click for larger image

made these from bike grips and neon $2 goodwill poles
Feb 27 2012 10:15PM
0 0
profile picture
rareison
Posts: 10263 - Karma: 219
Sick! I tried to put BMX grips on mine, but they were too big.
Feb 27 2012 10:17PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,269
Click for larger image
They're those black composite good ones, never broken them. I put these slightly thinner grips on them a while ago. Straps look ghetto but they have never fallen out or been any trouble.

Anybody ever cut these with a finer toothed hacksaw? They could do with a few inches less.
Feb 27 2012 10:26PM
0 0
profile picture
rareison
Posts: 10263 - Karma: 219
yeah, I used a pretty tiny hack saw, the teeth were like 2 mm high maybe. Took about 5 mins for each pole. Anyone know if there are any type of bike grips that are thinner than bmx grips? Cause I really wanna put bike grips on, but my bmx grips were too big.
Feb 27 2012 10:32PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
me too, but i put a ton of duct tape on the end so they fit snug. the rope also helped make it snugger, then you just have to force the grips down onto the pole
Feb 27 2012 10:44PM
0 0
profile picture
rareison
Posts: 10263 - Karma: 219
bump. Let's see some others!
Mar 4 2012 10:59AM
0 0
profile picture
Whaddup
Posts: 105 - Karma: 586
Zombie bump




Joysticks, cut 10cm off the bottom section so they adjust like 90-130cm, added some bike tape and grips
Dec 27 2022 11:24AM
2 0
profile picture
Whaddup
Posts: 105 - Karma: 586
Here's some joysticks I just did


Remove grips by placing them in hot water for a few


Since I wanted to shorten these poles, I heated and removed the plastic piece at the end of the bottom section as well


Duct taped at the length I wanted and cut with a hacksaw, glued plastic piece back in


Oury pyramid BMX grips have a narrower grip diameter and a large, soft rubber flange. Since I'm using them upside-down for a 'grab tab' effect, I used a dime to trace a circle with a silver sharpie, and cut a hole with an x-acto knife


Measured and cut duct tape sections for a good fit


This specific kind of lizard skins handlebar plug wasn't included with the bar tape and I found them separately. Hammered in to top of pole.









Wrap bike tape from bottom to top, cut and tape down the end. Boom



Dec 27 2022 1:10PM
4 0
profile picture
Whaddup
Posts: 105 - Karma: 586
Alright so the duct tape/epoxy situation gave out.

So I folded the grips inside out and sanded em up with some heavy low grit sandpaper, replaced the duct tape with cloth climbing tape, and the epoxy with superglue. We'll see how it does. Superglue worked on my last ones.
Jan 18 2023 5:44AM
0 0
All times are Eastern (-5)