Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

115mm brakes on a 93mm ski? Will this work?

profile picture
Canuker
Posts: 4730 - Karma: 165

So I was getting my chronic cryptos mounted with my my rossi fks 12's. The problem was the brakes i had on were too narrow so the tech had to order wider ones but the only ones he had available were 115mm ones. Im wondering if these are going to be too wide for my skis.

Dec 18 2011 6:54PM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165
anyone??
Dec 18 2011 10:01PM
0 0
profile picture
malonius_funk
Posts: 2249 - Karma: 1,500
thats pretty wide for a 93mm ski. i don't think so.
Dec 18 2011 10:09PM
0 0
profile picture
[J_Gasper]
Posts: 2983 - Karma: 1,594
my 90mm breaks work on my crypto's easily, don't even have to be bent out. its jesters though, cant speak for fks.
Dec 18 2011 10:22PM
0 0
profile picture
J-Sway
Posts: 685 - Karma: 111
i have 115mm breaks on my 100mm wide skis. I would say your fine
Dec 18 2011 10:22PM
0 0
profile picture
Piste.Off
Posts: 11586 - Karma: 1,860
bend your 90mm brakes, the 115s will most definitely catch while carving
Dec 18 2011 11:23PM
0 0
profile picture
DR.SHRED
Posts: 2134 - Karma: 503
i have 115mm breaks on a 92mm under foot and they are the fks and it works fine ive never have it catch in 2 years ive been riding that set up
Dec 19 2011 12:09AM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165
my breaks were 80's actually, and i think they got rid of them at the shop but ill double check.
Dec 19 2011 12:34AM
0 0
profile picture
iffe
Posts: 984 - Karma: 120
Sounds like a bad idea. I've got Pivots with the 90 mm brakes on my Chronics (this year, so 92 mm) and the fit is absolutely perfect.
Dec 19 2011 4:29AM
0 0
profile picture
Ralf
Posts: 978 - Karma: 81
i got 100mm on my halos (83mm), works fine
Dec 19 2011 5:19AM
0 0
profile picture
SteezoSaurus
Posts: 2630 - Karma: 2,670
It will probably work, but chances are it will result in a bent brake sooner or later.
Dec 19 2011 5:26AM
0 0
profile picture
blindside
Posts: 5619 - Karma: 1,199
The chances of bending/breaking your breaks will significantly increase. Especially if you're planning on doing anything switch...
Dec 19 2011 11:25AM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165

fuck this is gay

Dec 19 2011 3:57PM
0 0
profile picture
themightyquinn
Posts: 44 - Karma: 10
I have 110mm brakes on an 88mm ski and they work fine. plus they will be a little back from the waist so they'll be a little wider
Dec 19 2011 4:05PM
0 0
profile picture
blindside
Posts: 5619 - Karma: 1,199
Lol the issue is that they are already too wide, being a little wider because they're behind the waist is worse..
Dec 19 2011 4:47PM
0 0
profile picture
rozboon
Posts: 1642 - Karma: 868
Just bend the old brake, if you still have it... both my FKS are on skis around 20mm wider than the brake they came with.
Dec 19 2011 5:12PM
0 0
profile picture
themightyquinn
Posts: 44 - Karma: 10
sorry dude I meant to say not as wide
Dec 19 2011 7:29PM
0 0
profile picture
maxwell666
Posts: 554 - Karma: 20
no its not, you obviously didn't think very hard before posting this.

The SKI is wider behind the middle, not the brake, meaning that a 108 underfoot with a short turning radius might be 112 at the brake line, and closer to the brake width.
Dec 19 2011 9:20PM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165
would i be better off just selling my bindings for new ones
Dec 22 2011 4:15PM
0 0
All times are Eastern (-5)