Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Car help..

profile picture
andrewg
Posts: 4746 - Karma: 18
95 blazer. I was changing the knock sensorse and on one of them the sensor broke off the threaded part. The threaded part is still in the engine block. And advice how to get it out? it wont budge.
Dec 11 2011 2:38PM
0 0
profile picture
iFlip
Posts: 4543 - Karma: 19,132
Sounds like a classic mattress-in-pool type of problem. You'll need a crane for sure.
Dec 11 2011 2:40PM
0 0
profile picture
andrewg
Posts: 4746 - Karma: 18
ok?
Dec 11 2011 2:45PM
0 0
profile picture
howlongcanausern
Posts: 4982 - Karma: 1,737
dremel a slot in the senor, grab a screwdriver and twist that shit out
Dec 11 2011 2:46PM
0 0
profile picture
andrewg
Posts: 4746 - Karma: 18
im not even sure if i'll be able to get a dremel or screw driver down there. everythings so close.
Dec 11 2011 3:02PM
0 0
profile picture
andrewg
Posts: 4746 - Karma: 18
there is a plug right about the knock sensor plug that has the same thread. will the knock sensor work properly if i throw in in that plug.. if i can even get it out that is.
Dec 11 2011 3:03PM
0 0
profile picture
andrewg
Posts: 4746 - Karma: 18
.
Dec 11 2011 3:45PM
0 0
profile picture
crab_pretzel
Posts: 3919 - Karma: 622
if you put a crane in a mattress it takes a pool to get it out.
Dec 11 2011 3:46PM
0 0
profile picture
JHendrix
Posts: 1493 - Karma: 48
My dyslexia made me see
Click for larger image
Dec 11 2011 3:47PM
0 0
profile picture
tronned
Posts: 1098 - Karma: 790
take a picture or draw out in ms paint what youre trying to explain. There is many ways to remove stripped/broken bolts.
Dec 11 2011 3:50PM
0 0
profile picture
SPskier543
Posts: 2413 - Karma: 324
reverse bit thingymajiger
Dec 11 2011 3:56PM
0 0
profile picture
chicken
Posts: 6843 - Karma: 2,123
yeah we probably need pics. what is getting in the way of getting a drill in there?
Dec 11 2011 3:58PM
0 0
profile picture
TheClap.
Posts: 21664 - Karma: 4,140
buy a volvo
Dec 11 2011 3:59PM
0 0
profile picture
SPskier543
Posts: 2413 - Karma: 324
if you want a harder car to work on
Dec 11 2011 4:00PM
0 0
profile picture
tronned
Posts: 1098 - Karma: 790
Click for larger image

those internal extractors, one option.

Click for larger image

this puppy is an external extractor.

Click for larger image

left hand drill bits.
Dec 11 2011 4:01PM
0 0
profile picture
andrewg
Posts: 4746 - Karma: 18
ill get back with a picture then. and everything is just so close together under the hood. its really difficult to even get a ratchet down there
Dec 11 2011 5:44PM
0 0
All times are Eastern (-5)