BUCKET CLIPS 3 | A FLINTA Ski Mixtape

Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Rossi Freeski Bindings Break Width Help +karma

profile picture
KRAMPUSNTROLLZ
Posts: 2715 - Karma: 355
Ok so I purchased some ARG's I have three pairs of bindings two of them being FKS 140s with max break width of 115 or right around there so obviously not going to work. I also have a pair of rossi freeski bindings. I believe they are the 120 break width. So my question is what do I do ? I really don't want to buy new bindings and I also don't want to go without breaks. I know I can't do anything about the FKS right? However is there anyway on the Rossi Freeskis to attach 140 breaks? Thanks.
Oct 5 2011 4:48PM
0 0
profile picture
division.bell
Posts: 2762 - Karma: 1,905
Time to bend some brake arms to the necessary width if you don't want to ride without brakes. Search on here, or on TGR for tutorials, or if you don't feel competent enough to do it yourself, check with your local shop. Some shops will and some won't, but maybe another person around your area could help you out?

Here is one example of a tutorial: www.tetongravity.com/forums/showthread.php/24647-P18-Wide-Brakes-Tutorial-(with-pictures!)?highlight=bending%20brakes

However, people have had better luck getting the bindings mounted, and then bending the brakes to the necessary width. This way, you are not disassembling your FKS bindings, and potentially running into problems with re-assembly.

Here is that example: www.tetongravity.com/forums/showthread.php/73273-A-Video-TR-How-to-Bend-Brakes
Oct 5 2011 5:32PM
0 0
profile picture
KRAMPUSNTROLLZ
Posts: 2715 - Karma: 355
Thanks for the info
Oct 5 2011 6:04PM
0 0
profile picture
SteezoSaurus
Posts: 2630 - Karma: 2,670
Unfortunately, you will not be able to swap brakes between the two. Have you tried going to your local shred shop and getting a new brake.

If not, listen to the post above. I ride the 180xxl with the 115 brake and it bent fairly easily onto a 125cm underfoot.
I'll be you could make it work.
Oct 5 2011 6:16PM
0 0
profile picture
KRAMPUSNTROLLZ
Posts: 2715 - Karma: 355
Well yeah not swap between the two models but could either model accommodate a larger break size than is currently on them?

Yeah I figure that will be the path I will take since it sounds like it works pretty well.
Oct 5 2011 6:40PM
0 0
profile picture
division.bell
Posts: 2762 - Karma: 1,905
The largest brakes that Rossignol sells are the 115mm brakes for the FKS bindings, and the 120mm brakes for the Axial2/Axial Race bindings.

Either way you look at it, you'll have to bend brakes or run them without brakes.

There are rumors floating around the internet of wider brakes being available for the FKS bindings at some point, but who know if or when they will actually come out, and how much they would cost.
Oct 5 2011 7:35PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,169
It costs 120 dollars to replace FKS brakes anyways so that would be dumb to replace them for no reason.
Oct 5 2011 7:48PM
0 0
All times are Eastern (-5)