Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Remounting skis?

profile picture
Afterbang_Aholic
Posts: 47 - Karma: 37
I got these skis last year and I put some binders on em.  Then the binders broke when i landed nose heavy on a 5.  What the deal with remounting skis?  i wanna know if I can put them back in dead center or what do yall suggest?
Aug 25 2011 2:18PM
0 0
profile picture
freeballer
Posts: 726 - Karma: 960
You might be able to use the existing holes, but I wouldn't recommend it.  If you have a different binding, you might be able to go back on dead center without having the old holes in the way.  It's just a matter of taking a look to see.  I don't like having new holes any closer than about 1 cm from the old holes.  You might have to move them back a bit to make sure you aren't too close.  when you put more holes in your skis, you are weakening the core, and if they are too close to the old ones you are risking pulling the binding out, which most ski companies won't warranty.
Aug 25 2011 2:34PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
Is it just a piece of the binding that broke off or did the binding actually rip out of the core ?

if it's just the binding that's broken, look for the same model and remount that single piece....

If the binding however actually ripped out of the ski you have 5 options

1) if the holes aren't stripped you can simply remount in the same holes again
2) if the holes are partially stripped or you don't trust that business, you can get helicoils or any other kind of insert in those holes and you'll be set again !
3)remount forward or backward (keep at least a cm distance between old and new holes)
4)remount with different bindings, make sure that with the new bindings screw pattern, there still is at least 1cm between old and new holes....
5) get new skis
Aug 25 2011 2:40PM
0 0
profile picture
gpitcher
Posts: 2626 - Karma: 1,691
its all going to depend on if its the same bolt pattern or a differnt binding. you can often use the same holes if you put a spring in them, but if they ripped out and tore the holes out, theres no way you can use em.
Aug 27 2011 8:33PM
0 0
profile picture
Thewhiteroom
Posts: 339 - Karma: 468
heres what you do. go to r local i shop have them put helicoils in your holes and remount them. helicoils give you better pullout strengths. when i drilled my suspects for the first time i just straight put the helicoils in there so i dont have to worry about that problem. What i did this last two years  though if use the new armada stepbit. which only some shops will have it if they sell armada skis. They use two different dimension depending on if you have all wood or some metal in it. The armada stepbit drills with the bit getting smaller at the tip which gives ity double the pull out strength. both work great. hope that helps
Aug 31 2011 10:47AM
0 0
All times are Eastern (-5)