Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
How to adjust the heel piece din on Salomon sth bindings?
Posts: 593
-
Karma: 43
Posts: 2090
-
Karma: 124
1. screwdriver
2.turn
3.????
4.profit?
Posts: 23992
-
Karma: 4,273
sticka da screw driver ina da slot and lifta da piece up and mova da binding
Posts: 1306
-
Karma: 24
put your boot into the binding first or else you will probably change the forward pressure instead of the din
Posts: 8670
-
Karma: 2,190
You could still change your forward pressure even with the boot in the binding. Plus if you do adjust it that way you have the potential to damage or break the spring.
Just don't touch the forward pressure at all unless you really know what you're doing, same goes for the din really, you don't want to be blowing up your knees. If you do need to tweak it, the din is always the top screw on the back of a heel piece.
Posts: 11335
-
Karma: 4,626
to add to this,
Since you don't even know where the DIN screw is on the heel, I wouldn't touch anything...
Posts: 1306
-
Karma: 24
in order to see the heel din chart well on sths you need to have your boot in the binding. i did not know it could break the spring my apologies
Posts: 1044
-
Karma: 31
Posts: 7088
-
Karma: -19
Or just lift the heel pce up, omg wtf...
Posts: 622
-
Karma: 35
I was about to say the exact same thing...
All times are Eastern (-5)
