• Forums
  • Ski Gabber
  • Changing marker griffon demo bindings for marker duke in same holes?

Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Changing marker griffon demo bindings for marker duke in same holes?

profile picture
shure2
Posts: 12 - Karma: 10
does anyone know if i will be able to swap over my marker griffon demo bindings for marker dukes without re-drilling my skis?


Mar 1 2011 11:20PM
0 0
profile picture
Flying~Squirrel
Posts: 6494 - Karma: 192
yes you can
Mar 1 2011 11:39PM
0 0
profile picture
Evilchris
Posts: 2090 - Karma: 44
demo bindings typically have a really weird hole pattern to accomidate for the demo track. I would be VERY surprised if they worked out
Mar 2 2011 12:00AM
0 0
profile picture
jKutcher
Posts: 3936 - Karma: 4,260
they will work out. There is just 1 extra hole you will have to plug
Mar 2 2011 12:10AM
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,581
you can not take screws out of skis then put other ones back in the same holes without first sealing the holes. the threads could be different, but even if they're not it just wont work very well. massively increases the chance of pulling them out of the ski because the threads can overlap. when you're talking about 1cm of wood that's not a good idea...
Mar 2 2011 8:41AM
0 0
profile picture
N.L.
Posts: 2420 - Karma: 2,744
for sure^ if you do try anyways, put the screws in without tearing up the old threads, and use wood glue. your best bet is to mount them a half an inch forward or back, you wont notice and you wont worry about pulling a toe piece out.
Mar 2 2011 10:50AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
Different hole pattern bro. Let your shop handle it.
Mar 2 2011 10:53AM
0 0
All times are Eastern (-5)