Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Smith I/O's - $40

profile picture
.jr
Posts: 5313 - Karma: 356
Smith I/Os with padding damage, see photos, could easily be fixed but I don't feel like dealing with it. Lens has some smaller marks, Id say these goggles are in 6.5/10. Only come with one lens and no cases. Buyer adds a few bucks for shipping depending on location.

Click for larger image

Click for larger image

Click for larger image



Feb 10 2011 9:04PM
0 0
profile picture
Italian.Stallion
Posts: 564 - Karma: 101

In this current condition, are the goggles usable?

Feb 10 2011 9:25PM
0 0
profile picture
.jr
Posts: 5313 - Karma: 356
Yep, or you could glue them in under a minute and the padding would be fine.
Feb 10 2011 9:27PM
0 0
profile picture
Italian.Stallion
Posts: 564 - Karma: 101
I'm down.
Feb 10 2011 9:37PM
0 0
profile picture
Triple_Strum
Posts: 6384 - Karma: 953
just an fyi, do not use glue on the foam. I did once and made the foam horrible to use, was like have a little rock stuck under the foam.
Feb 10 2011 10:29PM
0 0
profile picture
Italian.Stallion
Posts: 564 - Karma: 101
What would you recommend?
Feb 10 2011 10:34PM
0 0
profile picture
NOSNOWJUSTICE
Posts: 1176 - Karma: 83
Yeah, hot glue worked ok... there was the bump though. If you can smear it enough it should be fine.

I've thought of using double sided tape. If you can find something similar to "servo tape" (used in radio control applications), it has thin foam between two REALLYYYY sticky outside layers, that'd be perfecttttttt.
Feb 11 2011 3:38AM
0 0
profile picture
CainTuckee
Posts: 160 - Karma: 60
ship them right down the street to me =)
Feb 11 2011 4:27PM
0 0
profile picture
LINE88
Posts: 289 - Karma: 11
where all is the foam ripped? just on that one side in the picture?
Feb 11 2011 5:08PM
0 0
profile picture
AlleywayDirt
Posts: 956 - Karma: 86
Smith has a lifetime warranty so just ship them in and get them replaced...
Feb 11 2011 6:54PM
0 0
All times are Eastern (-5)