Hey I was wondering if building a rail from pvc would be passable (sp?) instead of using HDPE? Im thinking about a wood frame with 3 wide 2"pipes.
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
Hey I was wondering if building a rail from pvc would be passable (sp?) instead of using HDPE? Im thinking about a wood frame with 3 wide 2"pipes.
there is a real good tutorial on how to build the exact setup you are looking for in the build-a-jib cult. but i just ductaped the 2 rails together, put the 2x4 over top of them (after lining everything up), and screwed 6 screws into each rail (one every 2-3ft). i screwed down through the wood then through the PVC. so when i flipped it right side up, the screw is sticking up through each pipe about 3/4". i dont know if that made any sense to you but basically i screwed up through the wood completely then into the PVC from the bottom, the screw is visible through the PVC about 3/4"
you really cant see in this pic but at the end, maybe 4" deep into the PVC, there are 2 screws sticking up (1 in each pipe)
hope this helps bro
With my friend, we did 4 pvc rails and honestly dude! u better put something on the tube because it breaks fucking easily