Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Base grind

profile picture
lakers2010
Posts: 74 - Karma: 10
if my bases are white in places is it important to get a base grind prior to waxing or can they just be waxed?
Jan 18 2011 9:17PM
0 0
profile picture
dylan.r.1080
Posts: 161 - Karma: 10
you mean a stone grind? If you got one everytime you waxed your skis would last like 100 days
Jan 18 2011 9:19PM
0 0
profile picture
.Max.
Posts: 2930 - Karma: 701
No.
Jan 18 2011 9:28PM
0 0
profile picture
Casey
Posts: 7849 - Karma: 24,323

a stone grind is more for when you are getting a full tune. Often times they will run your bases with a belt sander to prep them for a hot wax, its not the same though.

Jan 18 2011 9:28PM
0 0
profile picture
lakers2010
Posts: 74 - Karma: 10
so i can just wax them then?
Jan 18 2011 9:34PM
0 0
profile picture
shibby
Posts: 7088 - Karma: -19
If it's really bad then get them ground and wax more often so that they don't dry out again.
Jan 18 2011 10:12PM
0 0
profile picture
dylan.r.1080
Posts: 161 - Karma: 10
haha im a retard, i thought you meant you had white bases, as in color. not the bases drying out.
Jan 18 2011 10:52PM
0 0
profile picture
onenerdykid
Posts: 6657 - Karma: 10,898
if your bases are white in places meaning they are dried out then yes you should get a stone grind. The white areas are dried out areas, they are not going to absorb wax. You don't need to do this every time you wax your skis but this does mean that you should wax your skis more often because they are drying out.

1. get base grind (tune probably wouldn't hurt either)
2. wax skis
3. wax skis on a regular, frequent basis
Jan 19 2011 1:32AM
0 0
profile picture
japanada
Posts: 13784 - Karma: 1,957
when you get your skis ground you are removing much of the wax in the bases. In order to prevent base burn as its called, many, many coats of wax are great. See if your shop has a hotbox and have them run your sticks through a cycle in there.
Jan 19 2011 1:56AM
0 0
profile picture
Paddington-Bear
Posts: 25 - Karma: 19

I've been wondering will the grinding help alsi skis with extruded bases?     I have Line anthems and they are bit slow.  Will the grinding make em faster and or help them hold wax better?                    So will my skis benefit from grinding or is it just waste of money?

Jan 22 2011 11:44AM
0 0
profile picture
Paddington-Bear
Posts: 25 - Karma: 19
That looks interesting...   Hope you got my point anyway
Jan 22 2011 11:50AM
0 0
profile picture
Paddington-Bear
Posts: 25 - Karma: 19
Anyone?
Jan 24 2011 10:17AM
0 0
profile picture
lilweisch
Posts: 333 - Karma: -4
Just wax your skis everyday you ski.
Jan 24 2011 10:52AM
0 0
profile picture
onenerdykid
Posts: 6657 - Karma: 10,898
Extruded bases do not absorb wax well (read: at all) when compared to sintered bases. They glide decently on their own for ease of use/maintenance (an extruded base glides better than a dried out sintered base, but not better than a properly maintained sintered base). Maxi-glide makes a rub-on wax specifically for extruded bases, but as it cannot be absorbed it will only last you a couple of runs.

Getting a stone grind with the appropriate pattern for the temperature you are mostly going to be in will help you out, but it won't be nearly as good as a properly maintained sintered base. Generally speaking, cold conditions = tight/fine pattern, warm conditions = spaced/deeper pattern.
Jan 24 2011 11:47AM
0 0
All times are Eastern (-5)