Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Do you have a little notch whole on top of your c bars nose?
Posts: 1852
-
Karma: 226
OK so i just got my dark grey lens for my cbars and when i put in the lens i noticed there is a little semi circle where the notch is supposed to snap in in the nose piece. I looked at another goggle with these and it has it as well.
Posts: 2781
-
Karma: 78
Posts: 1588
-
Karma: 302
Your lenses aren't all the way on your frames.
Posts: 526
-
Karma: 10
this.
you arent pressing it into the tiny plastic rod.
Posts: 1852
-
Karma: 226
Posts: 1212
-
Karma: 60
Posts: 8853
-
Karma: 65
Posts: 526
-
Karma: 10
then you need pics to get help as apparently changing a lens is too difficult for youuuuu
dont get mad.
Posts: 8280
-
Karma: 5,173
take out the lens and put it back in...worked for me.
Posts: 1588
-
Karma: 302
Take out the lens again. Put the nose piece in first and make sure it is completely pushed in. It shouldn't have any little notch like things at the nose piece. I really don't know what else to tell you besides to push harder if that doesn't work. Just don't push to hard and crack your lens.
Posts: 4531
-
Karma: -7
Its an accessory attachment point. GoPros, goggle wipers, analbeads, etc.
Posts: 1588
-
Karma: 302
Posts: 138
-
Karma: 11
Posts: 726
-
Karma: 131
ha get a load of the gaper who cant even put a lens in. i/os are better. just messin josh. oh and btw i sprained my lcl
Posts: 23992
-
Karma: 4,272
it's out of alignment or not pushed in enough. put the nose in first and push and wiggle until it snaps down into place
All times are Eastern (-4)
