Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Suggestions to my setup

profile picture
BITS
Posts: 1808 - Karma: 866
So, my setup's way to fast, I'm coming in with to much speed, but I can't find a way to fix it without building a new, which I wouldn't prefer.

Do you have any suggestions, how to make my setup better? That would be appreciated :-)

Click for larger image

inb4 wrong forum. theres no activity in build a jib 101, so posted it here instead.
14 years ago
0 0
profile picture
carbon.pulse
Posts: 3348 - Karma: 23
1) Take a mini speed check at the bottom.
or
2) Start lower.
or
3) Make rail higher
14 years ago
0 0
profile picture
hjb
Posts: 742 - Karma: 40
Can you make the distance from drop in to rail longer? Or change the angle of the rail? Put it slightly up?
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
the sketchup's not exactly as it is, i have no time to brake down before the kicker.. and it's impossible for me to start lower because the dropin's like 2 feet wide..
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
no, i cant because of the wall at the end, so i would hit it everytime i land ... :) but changing the angle might just help a little...
14 years ago
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,582
how much do you like your skis? you could score the bases a bit if you use really shit skis for this setup. that'll slow you down a bit. otherwise you can make the jump onto the rail bigger and turn it into a slight downrail. ie. you go down the ramp, up a longer lip then onto the rail. just a thought
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
my skis are like... brand new, so no :) but ill might try your other thought.. thanks
14 years ago
0 0
profile picture
powpowfreshyo
Posts: 60 - Karma: 10

Make a higher rail

14 years ago
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,582
no worries. turning it into a street/down rail will be a bit of work but it should make it more interesting. you'll have the same amount of speed coming down the inrun but the higher lip will slow you down a little bit
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
but if i make it a downrail, that will give me more speed, so it wont change that much in the end...
14 years ago
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,582
do you want to slow down your speed getting onto the rail or your speed after the whole setup before you hit the wall?

because if you're worried about hitting the wall you should just get a pallet from your local supermarket and prop it up...turn it into a quarterpipe....sort of
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
Problem is, im on the rail for a very short amount time, so i dont have time to do switchups and so
14 years ago
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,582
the trick isnt to slow it down then.....you need a longer rail
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
No, a 10ft rail is enough... Its just the speed
14 years ago
0 0
profile picture
L.U.P.E.
Posts: 699 - Karma: 3,153
quite possible the worst idea ive ever heard............
14 years ago
0 0
profile picture
alexg1687
Posts: 1505 - Karma: 1,582
how so?
14 years ago
0 0
profile picture
L.U.P.E.
Posts: 699 - Karma: 3,153
soo wat you need to do is stand on your drop in with your poles and put ur poles and plant them down the drop in as far as possible. mark the spot ur poles were and put a small peice of wood or sumthing to push your poles against so when your droping in you can really creep down the top of the drop in. then when you get to the right spot you just pick ur poles up drop in and have less speed to do your rail trickery. sory if that doesnt make sens but it works i had the same problem.
14 years ago
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
make a longer down rail, elevate the beginning of the rail and start from halfway on the down part...

also, if the down part is too long/fast, remove snow and use turf instead....
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
Ill do that thanks!!!! :)
14 years ago
0 0
profile picture
Dr.Brown
Posts: 588 - Karma: 21
Make an up down rail. The up section will slow you enough and the transition from up to down with let you do your switch ups. If you have enough speed, you can pop the down and practice 4 outs or whatever. Anyways, i find an up down very fun to practice on, in stead of a flat rail.
14 years ago
0 0
profile picture
matt22matt
Posts: 272 - Karma: 17
longer rail to wallride.
14 years ago
0 0
profile picture
salomon097
Posts: 1345 - Karma: 301
uhh remove the "small box" from yoru drop in? why would you make it higher whe nits already 8.5 feet
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
Because the roof's very thin, so it prevents me from centering my body weight on one place, which could cause the roof to break
14 years ago
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
this!
or an up rail, basically ride it to the end, stall, do a switch up and slide back down, how sick would that be ?!
14 years ago
0 0
profile picture
Shlogan
Posts: 4942 - Karma: 430
the flat just needs to be longer, even build it slightly up,a dn then just put the lip almost right up against the rail.
14 years ago
0 0
profile picture
matt22matt
Posts: 272 - Karma: 17
yah up rail to wall ride of if you go a bit slower you just slide back down the rail.
14 years ago
0 0
profile picture
egg.
Posts: 3231 - Karma: 3,477
bigger jump with higher rail maybe?
14 years ago
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,903
Looks great, but I think you need a mellower tranny for that wall ride. 
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
im not aiming for it as wallride :) the wall's just in the way, and i'm not gonna use it as a feauture...
14 years ago
0 0
profile picture
Scott.Benson12
Posts: 113 - Karma: 10
this.
14 years ago
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,903
I was just being a tool.  One thing I would recommend is using lattice of PVC roller for the drop in instead of snow.  If there is any flex in your drop in, the snow wont hold and it usually doesn't stick well to wood anyway. 
14 years ago
0 0
profile picture
BITS
Posts: 1808 - Karma: 866
Ive attached turf to the dropin and put snow on top, it holds up fine :)
14 years ago
0 0
profile picture
HIT
Posts: 3524 - Karma: 4,996
haha i cant wait for footage if you hitting that wall HARD after pulling a sketch blindside 2 off or something and just not seeing that wall coming

incoming broken nose!
14 years ago
0 0
All times are Eastern (-4); Currently it's 12:37PM