Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Home made GoPro mounts

profile picture
andrew95
Posts: 2090 - Karma: 124
I think about 90% of ns now has go pros and the mounts could be kind of expensive in some cases so if you make a mount from something or use a mount in another way than made for please post here!

here is my creation: I used an old pair of suspenders and wraped them under my arms backwards and connected them, i plan to stick a flat stickie to the black part of the suspenders and slide the quick release mount onto it just like the chest mount go pro sells i also taped the back in two spots like straps

Click for larger image

its not the nicest looking thing but im thinking its going to work
15 years ago
0 0
profile picture
skithesprings
Posts: 9086 - Karma: 1,349
its easier if you just put the straps through the orig plate mount that the gopro comes on.
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
good call... im guessing im not the only one that has tried this
but people have to have made some good ones
15 years ago
0 0
profile picture
Sklar
Posts: 8865 - Karma: 31,618
i made a pole mount using a shower curtain rod and a bolt for the tripod mount
and a cable cam with a bolt for the tripod mount
15 years ago
0 0
profile picture
skithesprings
Posts: 9086 - Karma: 1,349
a friend of mine made a super quality chest mount but the shots don't come out as great as you might imagine. I stucka mount to the end of one of my ski poles though and it makes for some awesome reverse pov shots when you hold it out pointed back at yourself ian provo style
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
if you could post pictures that would be great
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
yeah i just did the same in a little edit i made... its not that good and i truly cant ski but check it out http://vimeo.com/18351934
15 years ago
0 0
profile picture
Gstrong
Posts: 4776 - Karma: 522
my helmet go pro thing flew off today in the middle of a backflip and i had to look for it for a while, pretty shitty.. i almost want to drill one of the mounts into my helmet, any ideas?
15 years ago
0 0
profile picture
Sklar
Posts: 8865 - Karma: 31,618
just make sure to always use a leash and tie it on, too
15 years ago
0 0
profile picture
Sklar
Posts: 8865 - Karma: 31,618
pics of which?
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
both would be nice.. i want to really see the cable thing you were talking about

15 years ago
0 0
profile picture
a_pla5tic_bag
Posts: 9244 - Karma: 5,695
i still want to see whoever said they were gonna mount one to a remote control helicopter and film with it.
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
that would be so sick to do http://www.youtube.com/watch?v=JDvdpPomSxA
15 years ago
0 0
profile picture
Sklar
Posts: 8865 - Karma: 31,618
Click for larger image

Click for larger image
my friend welded the bottom square on the wrong way so i just flipped the bolt and hang it upside down

shots from it at 0:55-1:10, and 1:22

Kayak 2.0 HD from Matt Sklar on Vimeo.



i dont have any pictures of the pole, its just a shower curtain rod, so its extendable, with a 1/4" bolt in one end so it can screw into the tripod mount
15 years ago
0 0
profile picture
Sklar
Posts: 8865 - Karma: 31,618
and here's a little test from the cable cam, this is before i started tightening itwith my slackline, which has helped smooth it out

Untitled from Matt Sklar on Vimeo.

15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
such a good idea great job!^
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
some people must have made some crazy mounts!
15 years ago
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
Heres mine. Took me 20 minutes to put this together..
1 piece of pvc.
old bike grip
a pvc mount? to mount wood to pvc
3x3 in cedar wood.
GoPro adhesive flat mount.
a couple screws.
lots of duct tape.
=
This..
works very well..and is surprisingly very sturdy.
Click for larger image
15 years ago
0 0
profile picture
Gstrong
Posts: 4776 - Karma: 522
^might have to make something along those lines
15 years ago
0 0
profile picture
belden...
Posts: 2914 - Karma: 1,274
Isnt that heavy and annoying to bring to the hill?
15 years ago
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
nope. not as heavy at all..considering the pvc is hollow and only about three feet long, it's fairly light. it's just another reason i used the cedar..it's very light. I'm very pleased.

15 years ago
0 0
profile picture
FerrisBueller
Posts: 8280 - Karma: 5,175
i made a pole mount, super lightwieght just attach to your pole when your ready. pics later.
15 years ago
0 0
profile picture
Hansel.
Posts: 4583 - Karma: 112
My gopro handle mount, only thing I dont like is that I have to carry it around the park rather than my poles.

Click for larger image
15 years ago
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
looks heavy..^
?
15 years ago
0 0
profile picture
Hansel.
Posts: 4583 - Karma: 112
not at all if anything it needs some weight in the back for support.
15 years ago
0 0
profile picture
Troy.
Posts: 5070 - Karma: 12,550
In that one edit someone posted, can't think of the name, where they had to do tricks to save the environment had a cam mounted to a heli
15 years ago
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
has anyone made a glide thing for a gopro?
14 years ago
0 0
All times are Eastern (-4); Currently it's 1:56PM