Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What bindings are compatible with full tilts?

profile picture
localonvolkls
Posts: 448 - Karma: 90
i have old pivots now and they move in the toe clamp. I've reads that mojo 15s will adjust to the boot. I know solamon has a toe height adjustment. Will the new pivots fit?
Dec 31 2010 12:17AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
the raichelle mold is obiviously made before 1998. is that really all anyone has to say? Does anyone have any luck with full tilts and fks or pivot clamps?
Jan 1 2011 2:48PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,169
STH driver toe piece is height adjustable but I have a friend who rides last years booters with an old pair of FKS and they work fine for him.
Jan 1 2011 3:01PM
0 0
profile picture
belden...
Posts: 2914 - Karma: 1,274
Yes theyll work. Stupid question
Jan 1 2011 3:43PM
0 0
profile picture
DJ_Pauly_D
Posts: 1043 - Karma: 42
-
Jan 1 2011 3:45PM
0 0
profile picture
Tablespoon
Posts: 923 - Karma: 14
.
Jan 1 2011 3:51PM
0 0
profile picture
shibby
Posts: 7088 - Karma: -19
This is a really, REALLY dumb question.
Jan 1 2011 6:57PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
Any binding that is ISO and DIN Certified.
Jan 1 2011 7:23PM
0 0
profile picture
Chompo.
Posts: 4952 - Karma: 88
this question is so stupid.. any binding should work..
Jan 1 2011 7:41PM
0 0
profile picture
Caleb.E
Posts: 3556 - Karma: 1,015
this, and im pretty sure we just fed the troll...
Jan 1 2011 8:13PM
0 0
profile picture
AGOF
Posts: 2038 - Karma: 3,602
Nominated
Jan 1 2011 11:40PM
0 0
profile picture
skithesprings
Posts: 9086 - Karma: 1,349
these are the only bindings that work with full tilts

Click for larger image

and

Click for larger image
Jan 1 2011 11:54PM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
From what i gather, they don't work. At least in my pivots. there is definitely movement and my boot is in good shape.
Jan 2 2011 12:25AM
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
I can't believe this question was just asked.


facepalm.
Jan 2 2011 12:30AM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,272
they fit well in the stirrups of a golden wheelchair
Jan 2 2011 12:38AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
this site has gone way downhill. Everybody just likes to be assholes. Whatever. Maybe my question was stupid but i obviously have an issue. i thought it may not work because I read that the first marker jester and griffons werent compatible with full tilts and figured that maybe old pivots wont work either. this is the thread where i read it: https://newschoolers.com/ns/forums/readthread/thread_id/585088/
Jan 2 2011 12:50AM
0 0
profile picture
thisisastickup
Posts: 597 - Karma: -24
Yeah, yeah it was.
Jan 2 2011 1:29AM
0 0
profile picture
andrew95
Posts: 2090 - Karma: 124
this.
Click for larger image
Jan 2 2011 1:29AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
damn motherfuckers how much time do you spend on here? you shun me for asking a silly question really? all i wanted is help, if i was lookin for trendy forum fucks i would start snowboarding and watching mtv.
Jan 2 2011 3:54AM
0 0
profile picture
Dustin.
Posts: 13839 - Karma: 7,704
Go to a tech and they will help you.  You don't have a clue about bindings or boots, take them to a pro.
Jan 2 2011 4:29AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
I do now, after reading some stuff and messing around with them myself i was able to fix it by increasing the forward pressure. Thanks but no thanks assholes.
Jan 2 2011 4:45AM
0 0
profile picture
skithesprings
Posts: 9086 - Karma: 1,349
reading some stuff on the internet and "messing around" with your bindings is a good way to get hurt.
Jan 2 2011 8:18AM
0 0
profile picture
Mr_pretzel
Posts: 4616 - Karma: 1,289
Your forward pressure is too loose.

Take them too shop and have them adjust it correct for you. I now a good ampunt about bindings and still like shops to do it for me.

Also they are compatible with all bindings, the first gen griffons only developed some play in the toe after some time. They fixed that now.


Jan 2 2011 9:47AM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,272
the only bindings that full tilts are not compatible with are dynafits and g3 onyx
Jan 2 2011 10:07AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
Ok cool this is the stuff I wanted to hear. A friend of mine talked me through it on the phone, but I will take the skis to mammoth and have them double check it.
Jan 2 2011 12:13PM
0 0
profile picture
Mr_pretzel
Posts: 4616 - Karma: 1,289
Have them test the bindings too, its always a nice to see if you bindings release right.
Jan 2 2011 12:18PM
0 0
profile picture
spaustin889
Posts: 166 - Karma: 13
there's lots of good stuff on here man, you just gotta take the time to sift through it. The more time you spend on the site the easier it gets.

Remember its a bunch of highschoolers that like to get their rocks off by bashing people and making sarcastic comments on the interwebz. But personally, its pretty damn funny most of the time.


And please go take your skis to a shop to make sure they are set good. Knee injuries are terrible!
Jan 2 2011 1:36PM
0 0
profile picture
Kreech
Posts: 4178 - Karma: 3,024
pivots with full tilt is a super common setup ie will wesson. of course they work
Jan 2 2011 2:31PM
0 0
profile picture
leahey
Posts: 2548 - Karma: 32
this
Jan 2 2011 2:39PM
0 0
profile picture
Dustin.
Posts: 13839 - Karma: 7,704
Well it was a very stupid question to start for multiple reasons, the biggest being that if you know that little about your safety gear...you shouldn't be touching it!!!  On top of that the kid was a gigantic douchebag who couldn't take a joke, thus my recommendation to take them to a pro (which he should still do if for nothing more than to test the setup since he doesn't know what he's doing).
Jan 2 2011 2:44PM
0 0
profile picture
beermuscles
Posts: 1821 - Karma: 100
yeah .. haha for you to not even know that you needed to adjust the forward toe pressure means you should take them to a tech.

especially with fks/look with a turntable .. they are really hard to adjust properly and i doubt you have the forward toe pressure adjusted correctly. is your heel piece flush in the back?
Jan 8 2011 4:28AM
0 0
profile picture
shreddenator
Posts: 329 - Karma: 28

Oh boy! Newbie? Welcome to the fold my friend!

I mean it could be the forward pressure, but it could also be your toe on your boot is worn....

Listen. If you have to ask this question you should head straight for the local ski shop with qualified techs and bootfitters. Tell them what your intentions and ambitions are, they will know the right answers (and the right questions too). They will set you up properly and you can quit thinking about this stuff.

Jan 8 2011 10:02AM
0 0
profile picture
shreddenator
Posts: 329 - Karma: 28

Don't get too upset....people are just messing with you...we are all bored and just want to be on the slopes instead of being at home stuck with the kids watching the gaddamn mickey mouse club because the two year old doesn' want to watch "The Way I see It". Goddamn it.....AND TO MAKE IT ALL WORSE IT IS SNOWING OUTSIDE BEAUTIFUL FLAKES OF FLUFF! IT IS SOOO GODDAMN FLLLLLLUUUUFFFFY.

Nevermind I am slowly going insane.

Jan 8 2011 10:57AM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
they're pretty much done, worn out. theyve been on like 5 pairs of my skis for the last 5 or 6 years and the toe pieces are pretty crappy although they still pass tests.
Jan 8 2011 1:21PM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90

Don't get too upset....people are just messing with you...we are all bored and just want to be on the slopes instead of being at home stuck with the kids watching the gaddamn mickey mouse club because the two year old doesn' want to watch "The Way I see It". Goddamn it.....AND TO MAKE IT ALL WORSE IT IS SNOWING OUTSIDE BEAUTIFUL FLAKES OF FLUFF! IT IS SOOO GODDAMN FLLLLLLUUUUFFFFY.

Nevermind I am slowly going insane.


dude will you chill please? I didnt want to read that but i did.

Jan 8 2011 1:23PM
0 0
profile picture
SkierX
Posts: 16253 - Karma: 538
Please, oh please go see a shop about this.

I don't mean this offensively, but you do not seem to be anywhere near qualified to be making adjustments to your bindings if you had to ask if a common market boot fits a common market binding.

For the sake of your knees, please go see someone who knows what they are doing.
Jan 8 2011 1:36PM
0 0
profile picture
shreddenator
Posts: 329 - Karma: 28
Dynaski27 me chill? Never but always!
Jan 8 2011 4:02PM
0 0
profile picture
Justo8484
Posts: 3905 - Karma: 205
i have pivots and konflicts, and they work wonderfully, provided they're adjusted properly. pivot/fks forward pressure is a huge pain, and a lot more complicated than adjusting forward pressure on pretty much any other binding. do your knees a favor and get your stuff binding checked at the very least before you ski again.
Jan 8 2011 5:52PM
0 0
profile picture
the.cheat
Posts: 2859 - Karma: 171
you really calling someone a noob? youve been here 5 days...
Jan 8 2011 6:21PM
0 0
profile picture
localonvolkls
Posts: 448 - Karma: 90
they get checked on a regular basis bra. no worries. They come off when they need to. Even though they are very worn out.
Jan 9 2011 12:42AM
0 0
profile picture
*george*
Posts: 2 - Karma: 28
Most line riders, ride with full tilt and marker bindings!

Thats what i use! i ride, full tilt (first chairs) and marker bindings ( jesters) work really well no movement at all super tight fit!

Jan 9 2011 12:53AM
0 0
profile picture
Mr_pretzel
Posts: 4616 - Karma: 1,289
Juste cause he only been here 5 days doesnt mean he is a retard. He knows his shit and makes sweet posts.
Jan 9 2011 2:57AM
0 0
profile picture
sNaubi
Posts: 1633 - Karma: 2,357
http://sieni.us/?id=38
Jan 9 2011 6:07AM
0 0
profile picture
shreddenator
Posts: 329 - Karma: 28

Thanks mr-pretzel.

I may be a noob here, but I have been skiing for over 25 years, and I have been blessed to live five minutes away from a resort....So don't assume my skiing career is limited to when I began enjoying this online stuff....

Jan 9 2011 9:29AM
0 0
profile picture
Hogis
Posts: 551 - Karma: 393
It would love to see someone shred with their boots glued to the ski.
Think it would look sick
Jan 9 2011 1:21PM
0 0
All times are Eastern (-5)