Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Making your own skis?

profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
would this be possible?  Also what wood and what plasic is on the bottom of them?  What metal is on the edges?  +k
Nov 18 2010 3:30PM
0 0
profile picture
djfromgr
Posts: 7 - Karma: 10

http://skibuilders.com/

Should have everything you need to know.

Nov 18 2010 3:32PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
thanks thats helpful    has anyone actually built there own skis
Nov 18 2010 3:44PM
0 0
profile picture
max...
Posts: 1379 - Karma: 802
good link. my threads
Nov 18 2010 3:52PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

having trouble finding out exactly what they put on the bottom

Nov 18 2010 3:55PM
0 0
profile picture
Jombob
Posts: 113 - Karma: 97
I haven't made any skis but have made some longboards in a vacuum bag. I think the easiest way for skis would be to copy the design of the line stepup http://lineskis.com/skis/stepup as it would be quite simple to make. For the wood you would want some high quality maple, edges are steel and you can buy them in a strip and base is normally UHMW and can be bought in rolls. Make a mold for the ski and laminate it up in one of these http://www.bagpress.com/How_It_Works.html.
Nov 18 2010 4:03PM
0 0
profile picture
rickroller
Posts: 2468 - Karma: 483
i was thinking about it last year but it looks like a lot of work and you need a press and some other shit. i was thinking about just shaping some 2x4s and slaping some bindings on there.
Nov 18 2010 4:10PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

thanks

Nov 18 2010 4:12PM
0 0
profile picture
Heart
Posts: 6156 - Karma: 3,462
You need a lot of expensive equipment, and its a very labor intensive process. Also, if you're not making big batches, it'll end up costing more than just buying a pair from a retailer.
Nov 18 2010 4:16PM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165
there was a thread a whhillle back where a member documented himself making his own custon park ski's, not sure where it is though.
Nov 18 2010 4:18PM
0 0
profile picture
Brenone
Posts: 4944 - Karma: 296
There was a thread in SG about a year or so ago by some kid who wanted to make his own skis and I think he came back a few months later and posted the final product and I dont think they were half bad. If I can find it Ill post the link.
Nov 18 2010 4:18PM
0 0
profile picture
fatherb
Posts: 1510 - Karma: 173
I would like to see this
Nov 18 2010 4:20PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

im not looking to make money i just think idt be fun

Nov 18 2010 4:32PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944

yea i was looking into this too cause it'd be fun to just make them exactly how you want them

Nov 18 2010 4:39PM
0 0
profile picture
Brenone
Posts: 4944 - Karma: 296
I tried to look quick but searching anything with the word ski or skis (i.e. how to make skis, making skis etc....) in it is useless. There are thousands of threads.
Nov 18 2010 4:45PM
0 0
profile picture
Rachy
Posts: 4355 - Karma: 2,761
Not actually making your own, but they will make them exactly how you want them down to the artwork at a base price of $333. The prices goes up as you make more changes and what not.

My friend made me a pair at their "factory" They turned out pretty dreamy.
Nov 18 2010 4:53PM
0 0
profile picture
JsNeagle
Posts: 1405 - Karma: 1,577
Building your own skis is 100% achievable and seems to be something that's getting more and more popular.  I know some people who are planning on putting together their first legit ski very very soon
Nov 18 2010 4:55PM
0 0
profile picture
Brenone
Posts: 4944 - Karma: 296
Is that dude still in business?
Didnt he have a bunch of problems and have to move out of his factory (aka van)?
I know he was getting ripped on over on TGR.
Nov 18 2010 4:56PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
You can do it for quite cheap if you like a thrill and high risk garage mechanics. To do it safely and to get good results, it does take a little money.
Nov 18 2010 4:56PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

high risk garage mechanics it is...

Nov 18 2010 5:14PM
0 0
profile picture
Brentizzle
Posts: 1584 - Karma: 1,871
My buddy chris makes his own skis. He spent 3 years making a ski press and a CNC machine in his garage. He has made 3 skis so far that are really sick. He can now make base graphics and topsheet graphics.
Nov 18 2010 5:34PM
0 0
profile picture
Canuker
Posts: 4730 - Karma: 165
id love to see pics
Nov 18 2010 10:56PM
0 0
profile picture
AndrewZ
Posts: 759 - Karma: 36
Its a fun and rewarding process, but be prepared to invest a lot of time and money, even when doing it as cheap as possible. I've completed one pair, and have a splitboard close to done. Check out https://www.newschoolers.com/ns/forums/readthread/thread_id/473769/ for the thread of the first pair I made. Ski Builders is an incredible resource, and grafsnowboards.com is helpful as well. But it's definitely doable, and if you have the time and money I would suggest trying it, it's super fun.
Nov 18 2010 11:05PM
0 0
profile picture
Abc567def
Posts: 8756 - Karma: 801
thats sick dude
Nov 18 2010 11:34PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

sweet im thinking like a abang construction and would just leaving something rly heavy on top of the mold do it?

Nov 19 2010 5:30PM
0 0
profile picture
cwillygood
Posts: 6831 - Karma: 1,829
my friends make their own skis there soo sick
Nov 19 2010 5:38PM
0 0
profile picture
Jombob
Posts: 113 - Karma: 97
Don't think a heavy weight would work, maybe if you had a lot of G clamps that could work
Nov 19 2010 5:41PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

I was thinking parking a car on 2 preses and putting a ski in each

Nov 19 2010 7:05PM
0 0
profile picture
Caleb.E
Posts: 3556 - Karma: 1,015
this, if u make yours with the average hand toosl and differnt things there going to probley end up pretty shitty! but thell still be dope!
Nov 19 2010 7:18PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

i do not expect these to be perfect, or even good, by any means

Nov 19 2010 7:22PM
0 0
profile picture
Daydreaming
Posts: 1686 - Karma: 48
Isn't the guy who founded that a laughing stock 'round here? I thought he went under when the quality of his skis stunk and ns threw a temper tantrum over it. If he is still going that's awesome, more power to him.
Nov 19 2010 7:44PM
0 0
profile picture
McFellon
Posts: 1841 - Karma: 2,005
pm phawks
he's working on some skis with the founder of Line right now
Nov 19 2010 9:03PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
i am havibg trouble finding phawks
Nov 20 2010 12:31PM
0 0
profile picture
Caleb.E
Posts: 3556 - Karma: 1,015
i wanna see some pics when your doen with them!
Nov 20 2010 12:42PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

if/ when i finish them ill post em here   

Nov 20 2010 12:48PM
0 0
profile picture
304NordMan
Posts: 2983 - Karma: 525
Talk to CT_CREW, this guy built a super bomber pair of skis, and they ski like magic. Dude slays on em'.
Nov 20 2010 1:14PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
www.snowboardmaterials.com  so helpful
Nov 20 2010 1:48PM
0 0
profile picture
SirFryanator
Posts: 11149 - Karma: 1,415
Yes. From what I heard from other ski industry folk he was not a good businessman and used subpar quality building techniques/materials. Pretty sure he's not even in business anymore.

Building your own skis is less expensive than you think, but you definitely need some time on your hands. I had this all planned out a couple years back but unfortunately I never found the motivation or money to carry it out. skibuilders.com has all the info you need.
Nov 20 2010 2:35PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
found everything (i think) for 100 including shipping
Nov 20 2010 3:38PM
0 0
profile picture
joshua
Posts: 5046 - Karma: 1,280
If you have to ask this you probably shouldn't be attempting to make your skis, just sayin.
Nov 20 2010 3:40PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

prolly but w/e

Nov 20 2010 3:42PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
...
Nov 20 2010 4:56PM
0 0
profile picture
bakedpow
Posts: 8770 - Karma: 10,467
Nice job dude. I am starting to build my own press as well. Any tips are greatly appreciated.
Nov 20 2010 5:10PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
like to push them together??? i cant buy a ski press sooo
Nov 20 2010 5:12PM
0 0
profile picture
McFellon
Posts: 1841 - Karma: 2,005
https://www.newschoolers.com/ns/members/profile/member_id/142178/
Nov 20 2010 5:15PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
thank you   i pmed him
Nov 20 2010 5:36PM
0 0
profile picture
cooper.fry
Posts: 2229 - Karma: 34
threads for later
Nov 20 2010 5:45PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541

 so would making two molds and driving the front 2 wheels of a car on them work?                                                                                                                                                                                                                                                                             

Nov 20 2010 8:12PM
0 0
profile picture
basedjase
Posts: 2510 - Karma: 640
.
Nov 20 2010 8:22PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
You should try it, post pics.
Nov 20 2010 8:37PM
0 0
profile picture
Z.J.H.
Posts: 842 - Karma: 1,541
srsly?
Nov 20 2010 8:40PM
0 0
All times are Eastern (-5)