Member of the Month

je_t.aime_canard
January, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Intuition Liners Question

profile picture
arandomname
Posts: 1989 - Karma: 18

I'm about to make a trade for Full Tilt Seth Pro shells in a 27.5, and I would need to get a liner.  I'm looking at Intuition Liners (which is what I'll be buying) and I want to get the PowerWrap liner.  If I were to get that for my 27.5 boots, what size should I get, US Mens 9 or 10?  27.5 boots translate to a 9.5 shoe.

Sep 20 2010 3:56PM
0 0
profile picture
onenerdykid
Posts: 6724 - Karma: 11,551
FT sells their Intuition liners aftermarket. I might suggest going that route because it will be the easiest way to get the correct length and last shape. Way less guessing, measuring, and trying to match up liners.
Sep 20 2010 4:01PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
Yeah, I saw that.  But are Full Tilts liners as good performance wise as the PowerWrap liner?  Or is there really no difference.
Sep 20 2010 4:07PM
0 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
Get the 9.


Sep 20 2010 4:11PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
Do you have an explanation why or is that just a guess?  Also, part of the reason I want the PowerWrap is it's 20 bucks cheaper than the Full Tilt one, I don't know if the Full Tilt ones are actually 20 bucks more worth it, of if the're just a bit overpriced.
Sep 20 2010 4:29PM
0 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
A 9 is for a 27/27.5 mondo shell. 

Full Tilt Intuition liners are still made by Intuition.
Sep 21 2010 10:00AM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,886
The FT pro liners are powerwrap liners.
Sep 21 2010 10:11AM
0 0
profile picture
PaleCelery
Posts: 7228 - Karma: 609
this... and get them from FT. A shop would be best, support them!
Sep 21 2010 10:38AM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
Thanks for all the help everyone, I'll try to go to my shop, but they really really suck, and I don't really trust them.  Also, they don't carry FT.
Sep 21 2010 1:43PM
0 0
profile picture
DUKES
Posts: 5150 - Karma: 691
love my intuitions in my dalbellos sssssoooooooooooooo comfy
Sep 21 2010 3:31PM
0 0
profile picture
special-J
Posts: 1572 - Karma: 4,477
probably a dumb question, but can i put a normal intuition liner (not power wrap) in an SPK?
Sep 21 2010 4:41PM
0 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
Yes.  I have Intuitions in my Atomic M110s.
Sep 21 2010 11:08PM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,886
then they most likely wont be able to get them, either try and find a shop that does carry FT or order off the Full Tilt site and they'll send it from the closest shop that has the product you need so you'll be supporting that shop.
Sep 21 2010 11:17PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
Yeah that's what I was planning on doing.  I'm hoping that my local shop can help heat mold them though because otherwise I'll have to drive over an hour.
Sep 22 2010 7:06AM
0 0
profile picture
PaleCelery
Posts: 7228 - Karma: 609
I drive over an hour to go to my shop, totally worth every minutes and every dollar in gas. I know they are legit and not gonna fuck my shit up. Make a day out of it, maybe theres some other shit you can do while in that town.
Sep 22 2010 10:37AM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
I do go there sometimes, and they're alright.  They're the only shop around where I live that has FT in stock so I might go there to get them heat molded, but I'm hoping the shop that is 5 minutes from me can do that.  Next time I want boots though, I'm definitely going there.
Sep 22 2010 2:29PM
0 0
profile picture
onenerdykid
Posts: 6724 - Karma: 11,551
dude, if you are spending good money on liners, don't waste your time with a shop that "might" do a good job. trust me, you don't want someone screwing up a high end liner mold. make a half day of it and get it done right. your feet will thank me. (if your local shop CAN do it well, different story...)
Sep 22 2010 2:34PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
Well the shop tech at my local shop are great, it's just the salesman are selfish and they get money by making sales, so that's all they try to do.  I do trust my local shop for all technical things but not if they're ever going to recommend me anything.
Sep 22 2010 2:37PM
0 0
profile picture
teamdummy
Posts: 1189 - Karma: 2,607
i just did my own at home. brand new full tilt seths with the intuition liners. in the oven, 250 degrees F for 15 min.  but do some research and learn about toe caps, etc if you try your own. 
Sep 22 2010 8:29PM
0 0
profile picture
special-J
Posts: 1572 - Karma: 4,477
sick, thanks.
Sep 22 2010 11:59PM
0 0
profile picture
onenerdykid
Posts: 6724 - Karma: 11,551
FYI, the layers of foam that FT uses are not designed to be cooked in any oven whatsoever, whether your own personal one or a shop specific one. The layers can separate and then you are shit out of luck. Only use a hot air blower designed for ski boots, it's the best option all around.
Sep 23 2010 10:50AM
0 0
All times are Eastern (-5)