Member of the Month

Biffbarf
February, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Look pivot question

profile picture
bigsoxfan
Posts: 734 - Karma: 10
hey guys...i have an old pair of Line Assasins with Look p10 bindings on them and i am looking to take the bindings off of them and put them on a pair of Troublemakers that had Rossi FKS bindings on them previously. are the screw patterns of the Look pivots and Rossi FKS the same? thanks
15 years ago
0 0
profile picture
PacificRimJob
Posts: 24730 - Karma: 30,003
They are not the same. Similar at a glance, but by no means are they the same.

You will have to get them redrilled.

15 years ago
0 0
profile picture
jibjunkie
Posts: 3807 - Karma: 191
you may be able to use the toe holes
15 years ago
0 0
profile picture
PacificRimJob
Posts: 24730 - Karma: 30,003
Unless their FKS toes... again, different pattern.
15 years ago
0 0
profile picture
jibjunkie
Posts: 3807 - Karma: 191
if they are 155 or 185 then yes you are correct but otherwise the fks 14 12 and 10 use the same plastic toe as look pivot and px

Click for larger image

Click for larger image
15 years ago
0 0
profile picture
bigsoxfan
Posts: 734 - Karma: 10
im not positive what type of FKS's were on them before but i'll definitely look into it...but it looks like i have to get at the very least the heel piece re-drilled, so i guess my next question is how bad is it for skis to have to get them re-drilled?
15 years ago
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,273
fine up to 3 times but 3+ sets of holes compromises the ski...although everybody has his opinion on number of mounts, but 2 is fine
15 years ago
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
Major hole clash between P series and FKS/Pivots. If your boots are the same size and you want to use the same toe position then you're screwed. Just take them to a shop and they can put the jig on an eye it up.
15 years ago
0 0
All times are Eastern (-5); Currently it's 0:47AM