Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Questions about making a jibyard style jump

profile picture
CraigAK
Posts: 1871 - Karma: 320

I dont know if its realistic or not, but id be stoked if i could some friends to pitch money in, and make a jump like the one in the Jibyard, in Ogden Utah.  Ive never been to the jibyard, if you dont know what im talking about check it out: https://newschoolers.com/web/content/viewvideo/id/323443/search_string/jibyard/ 

I dont think itd be hard to make an outdoor one... so heres my questions....

1.)  How deep would the foam pit have to be so you survive?. (id think at least 3 and a half)

2.) What material is the jump itself made out of? i see the rollers for the drop in.

3.) Any idea where id go about buying the rollers... i might pm the owner of the jibyard for this.

Any thoughts or advice would be appricated. Once again, i dont know if this is realistic, or how expensive id be if 10-20 kids pitched in, it could be dope. I have a friend who i think making the drop in off the roof of a building not attached to his house would be perfect. im going to ask him once i figure more out haha.

Mar 4 2010 4:23AM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320

oh, and since i dont want to spend tons of money, i was going to use foam from mattress people were getting rid of, as well as packaging foam i can get for free, ect. itd be pretty ghetto, but i think itd be legit

Mar 4 2010 4:52AM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320
sorry about tripple post... but instead of rollers i could just make a ladder style drop in with pvc rollers over the wood maybe...
Mar 4 2010 4:56AM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320
oh i got it! ill use a dumpster as the pit!!! cheap as fuck.
Mar 4 2010 5:17AM
0 0
profile picture
gabe.
Posts: 1891 - Karma: 47
with metal edges? not a good idea IMO
Mar 4 2010 7:22PM
0 0
profile picture
skijunkiedtm
Posts: 9229 - Karma: 61
just pad the fuck out of it.
Mar 4 2010 7:44PM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320

i was thinking for the pit, you could layer of old tire on bottom, followed by old mattresses, followed by random foam such as from places that remove carpet, get there old under carpet foam, maybe shred some of it. and then a little soft foam on top would do the trick id think.

still dont know what the jump could be made out of.... any ideas?

Mar 4 2010 10:31PM
0 0
profile picture
AMD_5
Posts: 745 - Karma: 15
matresses and tires would have to take up less than a third of the dumpster. any more and the amount of foam you put in would not be able to absorb the impact without it hurting you. so:

soft foam - 10%
under carpet foam - 20%
denser scraps of foam from factories - 40%
matresses - 20%
tires - 10%

if you want an idea, watch the Mythbusters episode where they jump off the roof into a dumpster


Mar 4 2010 10:52PM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320

thanks, + karma to everyone.

and im still wondering what in the world the jump itself could be made out of.

Mar 4 2010 10:58PM
0 0
profile picture
mavinnowhere
Posts: 331 - Karma: 24
snowflex?
almost looks like carpet to me
i'd say contact em
Mar 5 2010 5:23PM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320

i found the owners newschoolers account, but he hasnt signed in the last 30 days... so i doubt id get an asnwer fast that way. ill try to find it on their site or something.

Mar 6 2010 3:41AM
0 0
profile picture
HeathR
Posts: 4359 - Karma: 1,382
i built my own rollers for a drop in and they worked really well. There are some pictures in the drop in thread or in my profile.
Mar 13 2010 11:16AM
0 0
profile picture
musick13
Posts: 913 - Karma: 44
You can buy legit foam for the top layer, It's like $1 per block though...
Mar 26 2010 8:16PM
0 0
profile picture
willyg0808
Posts: 4231 - Karma: 1,364
pillows and bubble wrap FTW!
Mar 28 2010 12:14PM
0 0
profile picture
JibbaTheHutt
Posts: 2132 - Karma: 1,597
wow a 10x10x8ft foam pit would cost $3200
Apr 16 2010 6:45AM
0 0
profile picture
Sklar
Posts: 8864 - Karma: 31,612
and then it rains and you have a gnarly wet gross smelly pit of foam
Apr 18 2010 1:31AM
0 0
profile picture
HalfandHalf
Posts: 1216 - Karma: 207
get some velcro so that you can velcro the tarp over the foam pit when it rains

and its pretty easy just to build a would frame/box/pen to hold the foam in, i have built one for frame/box/pen in a construction project that is easy to build

the only problem i think there is is to get enough speed
but this sounds really sick if you can build it
Apr 20 2010 9:02PM
0 0
profile picture
CraigAK
Posts: 1871 - Karma: 320
It would have been awesome, thanks for all the advice! the place i thought it would be douable is outta the question now unfortuently, +karma anyways
Apr 21 2010 3:31AM
0 0
profile picture
B-runge
Posts: 16558 - Karma: 361
the jibyard uses actual snow for the jump....
Apr 21 2010 6:24PM
0 0
profile picture
HeathR
Posts: 4359 - Karma: 1,382
it looks like it.
May 8 2010 4:29PM
0 0
All times are Eastern (-5)