Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Line anthem problems

profile picture
broto
Posts: 9039 - Karma: 25,662
i have a pair of 171cm '10 line anthems. i've only been skiing them for maybe 4 months and i already have a bunch of gouges in the bottom of the ski. you can see through to the base at one point. i have a pvc rail which i hit alot and ride the regular rails at my park, but that shouldnt make giant holes. also, my friends hit my homemade rail and nothin happens to there skis. anybody else have a problem like this?
Mar 3 2010 9:39PM
0 0
profile picture
bcippps
Posts: 6 - Karma: 9
ive got chips in too it just peels right off
Mar 3 2010 9:42PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
by chips you mean in the graphics or base?
Mar 3 2010 9:52PM
0 0
profile picture
shshatty
Posts: 23 - Karma: 10
I only have chipping on the graphics nothing wrong with the base on mine
Mar 3 2010 9:56PM
0 0
profile picture
jamodeo
Posts: 3040 - Karma: 663
if its gouges you probably hit a rock or something if its in the topsheet its just everyday wear and tear
Mar 3 2010 9:57PM
0 0
profile picture
396222687862
Posts: 0 - Karma: 350
i snapped mine last weekend, 4" back from my binding. cracked the fuck outta the ski, no longer rideable. woot!
Mar 3 2010 9:59PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
it doesnt seem from rocks. the gouges are everywhere and all the way through in some places, ill try and get a picture
Mar 3 2010 10:01PM
0 0
profile picture
Livefreeorski
Posts: 90 - Karma: 10
Bring it too a local shop that supplies Line Skis and ask them what they think.  if its in the base it's most likely a manufacter's defect because those are some hard skis to break with the double thick edges and all.
Mar 3 2010 10:05PM
0 0
profile picture
sizzlarida
Posts: 2 - Karma: 10
lines have had a tendency to fall apart on me too... still sick skis tho
Mar 3 2010 10:09PM
0 0
profile picture
AEROPLAEHN
Posts: 1353 - Karma: 192
Sounds like core shots from rocks - only other guess would be if you're fastplanting onto rails, bc I got some little dents in my bases from doing fast plants onto my backyard rail.

P-tex that shit - if it goes all the way to the core you need to do a base weld, so the ptex will stay. 
Pics will help show the problem better, but that's the best input I can provide fo now.. 
Mar 3 2010 10:10PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
Click for larger image
thats my ski. and there is a little yellow paint from a new rail at my park a few weeks ago, ignore that. but look at those mothertrucking holes
Mar 3 2010 10:15PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
https://newschoolers.com/web/content/pictures/id/333657/member_id/139143/ sorry, theres a bigger picture
Mar 3 2010 10:18PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Larger resolution please.
Mar 3 2010 10:18PM
0 0
profile picture
pat_in_the_hat
Posts: 3019 - Karma: 2,695

at least they havent done this

Click for larger image

Click for larger image

Mar 3 2010 10:23PM
0 0
profile picture
tydan
Posts: 276 - Karma: 78
Man, those things are beat.
Look like you've been riding jumps into a gravel pit.
But thats not just wear and tear.
Mar 3 2010 10:28PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
https://newschoolers.com/web/content/pictures/id/333675/member_id/139143/ heres a higher resolution pic. and yeah dude those are definately some bigass holes. how the hell did that happen
Mar 3 2010 10:33PM
0 0
profile picture
SICKYGNARGNAR
Posts: 402 - Karma: 31
You sure you haven't skied into rocks or have some sharp stuff on your backyard rail?

My whole crew skis Lines VERY hard. I have broken 3 other pairs of skis this year (not lines) and I have hucked 30 footers to rocks and have had no problems. Of all the various brands of skis I have been on Lines seem to have the hardest/strongest bases.

Are you storing your ski in a hot car trunk or inside next to a heater or something odd?
Mar 3 2010 10:54PM
0 0
profile picture
bigsoxfan
Posts: 734 - Karma: 10
dude wtf..that sucks gotta be a defect if you havent hit any rocks. wiping down your edges after you ride will stop the edges from rusting though, your edges look rusty as hell
Mar 3 2010 10:54PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
im near posotive i havent skied them into rocks. the only things i can think of is roots from cat trails or my homemade rail. but neither of those should have an effect
Mar 3 2010 10:59PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
and most of the time i keep them in my garage or right outside the front door, both or cold enough,
Mar 3 2010 11:01PM
0 0
profile picture
Mt_Baker_Man
Posts: 2012 - Karma: 105
Dude, I have some K2 silencers that have a few chunks like that. Its because you are not doing enough maintenance. You need to grind and wax the base once in a while, otherwise you get little nicks and scratches, which if slammed across a rail burr, make a huge gash. Sorry to say it, but I think that is your fault.
Mar 4 2010 11:20AM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
okay, but how does not waxing your skis make them more likely to get gouges/scratched. i dont really see a connection
Mar 4 2010 3:55PM
0 0
profile picture
gregorio
Posts: 2372 - Karma: 151
use ptex. a shit ton of ptex. so much ptex. and then use some more ptex
Mar 4 2010 4:25PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
haha yes, i think i might get it done professionally when the seasons over
Mar 4 2010 6:09PM
0 0
profile picture
backbarvey
Posts: 158 - Karma: 59
is it the ridiculous graphics. not a helpful post i know but what is the fascination with having boarders on ur skis?
Mar 4 2010 6:24PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
because they have retro steeeeze obviously. and thanks for the help guys, im getting the holes filled at ski company so ill see if its still a problem after that
Mar 4 2010 6:29PM
0 0
profile picture
Mt_Baker_Man
Posts: 2012 - Karma: 105
I said "GRIND" and wax your skis once in a while. If your bases are peglected, the plastic gets dry and brittle. And if you have a bunch of little burrs and nicks in your dry base, your gonna have a bad time...


The thing that causes what your describing, is rail sliding, which causes scratches and nicks in your bases. If your bases are dry, and you do not grind or file the nicks once in a while, you will catch one funny on a slide, and rip chunks out like you did.

Maybe try more skiing, and less jibbing?
Mar 4 2010 7:12PM
0 0
profile picture
Rictrok
Posts: 13 - Karma: 48
my line athems have held up like shit. all i hit is park rails and jumps and once in a while a pvc rail. but the bases gauge like butter and the edges have ripped out multiple times. great ski but the durablity is lackluster to the max
Apr 4 2010 7:55PM
0 0
profile picture
Alex420
Posts: 93 - Karma: 13

mine got lodged in this crack of a battleship box. looked like my ski was completely fucked. but... it got lodged right in the butter zone. butterzone saved my ski

Apr 4 2010 8:40PM
0 0
profile picture
Abc567def
Posts: 8756 - Karma: 801
My anthems lasted me almost 2 season and held up amazingly. I even dropped a 55 footer on them and only broke a wing off my toe piece. Great skis for sure
Apr 5 2010 11:29AM
0 0
profile picture
Lemuel
Posts: 14484 - Karma: 10,586
My room mates snowboard had odd chunks taken out of it like those.  It looks like a cheese grater did it.  I have no idea what happened, but he had them all over his boards base.  Get a base grind and a ptex and you will be fine.
Apr 5 2010 4:50PM
0 0
All times are Eastern (-5)