Member of the Month

Biffbarf
February, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Line Afterbang help please!!

profile picture
n00bsauce
Posts: 26 - Karma: 25

I just bought a pair of Afterbangs, and I'm not really sure what to do when mounting them to make sure the wood doesn't split. I've heard a few things regarding wood glue, but I want to make sure they're done right. Can anyone help me out?

p.s.- I have the access to the proper mounting bit and the jig to do so.

15 years ago
0 0
profile picture
Sherpa
Posts: 270 - Karma: 1,775
just mount them like you would any other ski
15 years ago
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,886
If you don't know EXACTLY what you're doing, DON'T DO IT. It's worth it to pay for a professional to do it.
15 years ago
0 0
profile picture
GreenStezz
Posts: 3570 - Karma: 714
w0w...............
15 years ago
0 0
profile picture
Pwn.Mode
Posts: 1061 - Karma: 10
put the jig on the ski, drill, glue with waterproof glue, screw in the binding (dont strip screws, if you do heli coil), adjust forward pressure, set dins make sure brakes clear.
15 years ago
0 0
profile picture
n00bsauce
Posts: 26 - Karma: 25
perfect. I've mounted tons of skis but never anything like this. I wanted to make sure before i jumped in there. thanks a bunch!
15 years ago
0 0
profile picture
peyton
Posts: 1475 - Karma: 1,062
.
15 years ago
0 0
profile picture
49566738265
Posts: 0 - Karma: 7,705
It's just wood, drill and screw.  It's not any different than any other ski, it just doesn't have sidewalls because apparently sidewalls aren't important.
15 years ago
0 0
profile picture
n00bsauce
Posts: 26 - Karma: 25

Thats what woulda made sense to me at the start, but then my friend brought up a solid point. That leaves where the screw goes in completery exposed to allow water in... And i guess there's been cases where the wood has split.

15 years ago
0 0
profile picture
-ROY-
Posts: 3633 - Karma: 1,503
im thinking you should bring them in to get mounted
15 years ago
0 0
profile picture
n00bsauce
Posts: 26 - Karma: 25
My local shop guy is a tool so he told me to find ou and he'll do it. I guess that wway he's liable hey?
15 years ago
0 0
profile picture
PeterWojnar
Posts: 3937 - Karma: 678
your name is noobsauce, and you are asking about how to mount bindings. GO TO A FUCKING STORE, AND HAVE AN EXPERIENCED TECH MOUNT YOUR BINDINGS.

Everyone who posted in this thread giving directions on how to do it is both a dumbass and an asshole- this guy will do it wrong, and you will have knowingly led him to it.

IF YOU HAD TO ASK, TAKE THEM TO A SHOP. It's that simple.
15 years ago
0 0
profile picture
49566738265
Posts: 0 - Karma: 7,705
Like every other ski, that's why you use wood glue to water proof it.
15 years ago
0 0
profile picture
drumbumocdp
Posts: 3230 - Karma: 1,107
Or you could stop being a tool and read that he has mounted skis before, he was wondering if A-Bangs were different than other skis because of their unique construction. calm down
15 years ago
0 0
profile picture
PeterWojnar
Posts: 3937 - Karma: 678
Sorry if I came off as an arse. It seemed, judging by the original post, that he was one of the many people who buy skis and bindings on the internet and are too damn cheap to get a shop to do it. So they ask Dr. NS how to do it, and try to freehand the holes because they don't own any jigs.

Still, giving out information on how to mount bindings on NS is a bad idea.
15 years ago
0 0
profile picture
Pwn.Mode
Posts: 1061 - Karma: 10
clearly you've never mounted skis. ha if you have jigs and what not its mindless. and im still sticking by my sound directions. adjusting them your self is dumb if you dont know what you're doing but all the bindings you purchase comes with directions and diagrams on how to adjust forward pressure yourself. so if you got a jig and u got the directions and you know what your din is then why not?
15 years ago
0 0
profile picture
PeterWojnar
Posts: 3937 - Karma: 678
I guess I just wouldn't trust myself to mount my own bindings...
But really, handing out any tech advice over the internet is not a good idea, because if the guy does it wrong and ends up with a broken leg, the american legal system could put YOU at fault. Which isn't where you want to be...

And no, I haven't ever mounted bindings.
15 years ago
0 0
profile picture
Pwn.Mode
Posts: 1061 - Karma: 10
yeah i see what you're getting at, from my first set of skis till now there was only 1 set i didnt mt my self and that was the only set that pulled out. maybe there's somthing to be said there. i think if you did it a bit you'd never let anyone else do it. anywho yeah i agree about the advice but there was no specifics mentioned about what binding hight weight sole length age din settings so i cant believe theres really anything to go on about fault. but anyway if you ever want to know how to do it and are in CO i'll give you a lesson on mounting or at least what to look for. like if your screws are stripped when u get them back or especially re mounts i've seen soooo many skis ruined because of some retards working at a shop if anything advice could be a good thing. ohhh well +k. have a nice night amigo.
15 years ago
0 0
All times are Eastern (-5); Currently it's 0:49AM