Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Full Tilt PAIN!

profile picture
Tmeels
Posts: 1009 - Karma: 77
Got fitted for boots, got booters, they fit my foot perfect foot wise and I love them except for this 1 pain.  Where the liner overlaps because of the wrap around design, it KILLS the side of my leg near my ankle bone.  When I bought them I looked at the liner, said "this looks like it could hurt, does anybody complain of this?" Guy said no, I checked NS and didnt see any complaints and sure enough this is the only thing that hurts. I got n shin bang, no arch pain, everything else is mint but right where that liner overlaps itself, it gives me enough pain to end a good day in the park.  Any help, suggestions, similar feelings?
Jan 16 2010 12:15AM
0 0
profile picture
Leafman
Posts: 2178 - Karma: 251
how many days have you skied them? my full tilts hurt at first but got much better after a few days
Jan 16 2010 12:22AM
0 0
profile picture
Big_Spence
Posts: 16177 - Karma: 4,352
who fitted you?
Jan 16 2010 12:22AM
0 0
profile picture
FerrisBueller
Posts: 8280 - Karma: 5,173
Get some spk's
Jan 16 2010 12:25AM
0 0
profile picture
Tmeels
Posts: 1009 - Karma: 77
7 days on em, everything hurt the first few days then they were good then this started.  Doesnt matter who fit me, I have em and I love em besides this one thing digging in.  Its only left foot too which is weird cause I keep em at equal tightness
Jan 16 2010 12:26AM
0 0
profile picture
DR.SHRED
Posts: 2134 - Karma: 503
do you wear a ski type sock. i get the same pain but its fine when i wear a ski sock
Jan 16 2010 1:09AM
0 0
profile picture
sagesnow
Posts: 3116 - Karma: 1,593
pretty much this same thing for me
Jan 16 2010 1:18AM
0 0
profile picture
I_liketobutter
Posts: 2664 - Karma: 997
i just got mine, and have rode them for two days now. first day right between my shin and muscle that part was hurting me. then after today it doesn't hurt anymore, pretty sure you just have to wear in the liner a little bit so it softens up a little.
Jan 16 2010 1:50AM
0 0
profile picture
bootleg_BEN
Posts: 2499 - Karma: 44
Sometimes the overlap can get messed up a little so make sure they are overlapping correct;ly
Jan 16 2010 2:27AM
0 0
profile picture
iliketoski329
Posts: 220 - Karma: 34
make sure your tightly and properly overlapping them before you buckle up. as a matter of fact my friend overlapped his the wrong way and said it hurt like a bitch so you may actually just be overlapping the wrong way...idk mabye
Jan 16 2010 2:35AM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
They do that, it hurts, it sucks. Relieve with new calves or new boots.
Jan 16 2010 4:47AM
0 0
profile picture
madtrix_1242
Posts: 28 - Karma: 24
check the sewing of the liner where it hurts. I got mine fitted and realized that it hurt just like you described and then i realized that the sewing was skrewy so i had to wait for new liners. The sewing was folded onto the inside against my shin
Jan 16 2010 9:23AM
0 0
profile picture
K.C.dia
Posts: 670 - Karma: 275
Make sure the liner is as tightly wrapped around your leg before you buckle them, then as you're buckling make sure that your tongue is staying straight. It often will move off to the side which will cause the pain you're talking about because when you flex the boot it's not going straight forward, but twisting to the side.
Jan 16 2010 9:29AM
0 0
profile picture
Keyjibbs
Posts: 1542 - Karma: 96
If you have skinny calves like I do I cut about an inch off the overlapping part that was hurting my calf and now it doesn't hurt at all.
Jan 16 2010 10:14AM
0 0
profile picture
onenerdykid
Posts: 6674 - Karma: 10,977
You can play with how they overlap over your shin.  Check to see if you have them wrapped around your shin the standard way- which is to have the flap that is on the inside part of your leg wrap closest to your shin (inside flap to inside).  If that is hurting you, wrap it over the "outside" flap (inside flap over outside flap) and try that.  There's rarely any "always do this" when it comes to boot-fitting, that's the whole point to anomalies.  Andy Parry had this same problem and this is what we did to fix it on one of his earlier FTs.
Jan 16 2010 2:29PM
0 0
profile picture
Gnams
Posts: 891 - Karma: 31
yep, very comfy
Jan 16 2010 2:32PM
0 0
profile picture
Slinger1x1
Posts: 8853 - Karma: 66
i mean i've never tried an intuition liner, but i have always thought that the "wrapping" liner looks like it would be uneven and paintful
Jan 16 2010 7:33PM
0 0
profile picture
IanAvery-Leaf
Posts: 9932 - Karma: 9,411
Same thing happened to me with my new full tilts, I just skied on em in lots of pain for a couple days and it went away
Jan 16 2010 8:21PM
0 0
profile picture
Slinger1x1
Posts: 8853 - Karma: 66
well obviously, or else no one would be using them...

but like, think about it. at that point of overlap, one side will be higher than the other, and at the point of overlap, there would be a gap, and uneven pressure on your shin

but it works...
Jan 16 2010 8:30PM
0 0
profile picture
NoCoastSkier
Posts: 1038 - Karma: 626
i had some high pressure pain in my ankles and i got some superfeet and taped and played with some foam inserts on the outside of my liner for a while and got them placed just right. Skied without ankle pain the first time in 3 weeks today. You might have a different problem. i wouldnt know cause they are not on my feet.
Jan 16 2010 8:37PM
0 0
profile picture
FerrisBueller
Posts: 8280 - Karma: 5,173
It doesnt matter how bad they hurt as long as they look cool and its what the pros are wearing.
Jan 18 2010 1:01AM
0 0
profile picture
Tmeels
Posts: 1009 - Karma: 77
That was such an original and cool reply
Jan 18 2010 1:03AM
0 0
profile picture
*LiNeLover*
Posts: 1224 - Karma: 256
mine have been doing the same.. there are 2 major spots in my left foot that hurt, and 3 in my right foot/ankle.. i was definitely in a lot of pain and my toes were numb by the end of the day. i hope they get better.. People up ^there^ said it might have something to do with how you wrap the liners.. for me, it definitely has NOTHING to do with how they are wrapped. best of luck. ha let me know if yours get better cause i have only been on mine 2 days so far!- im a tad worried..
Jan 18 2010 1:18AM
0 0
profile picture
selkirks
Posts: 1978 - Karma: 59
I'm sorry, but is this really that difficult? Go back to the bootfitter and discuss the problems with your bootfit. Sounds pretty simple to me.
Jan 18 2010 1:28AM
0 0
profile picture
TheRancor
Posts: 51 - Karma: 78
I had pain alone the top of my foot turned out it was a design flaw im getting 2011 clasics for free now
Jan 19 2010 11:49AM
0 0
profile picture
amo
Posts: 6709 - Karma: 1,248
If by your ankle bone you mean those two bumps on the inside and outside of your foot then I had the same problem. Turns out it was a seam from one of my ski socks. All I had to do was adjust the sock and I was good to go.
Jan 19 2010 12:15PM
0 0
profile picture
BikeMlatt69
Posts: 1947 - Karma: 60
on my left foot on the ankle, there is something that pokes my ankle, i don't know if this is the same thing as the OP is experiencing but whenever i investigate, i can't seem to find the source of the poking sensation. any help would be much appreciated.
Jan 19 2010 12:27PM
0 0
profile picture
amo
Posts: 6709 - Karma: 1,248
it might be you sock!
Jan 19 2010 12:33PM
0 0
profile picture
Toilet-Ott3r
Posts: 369 - Karma: 24
ive seen so many threads on this,sometimes its just about taking the time to break them in as much as possible.Like walking around the house or even when your sitting on NS just keep them on,especially if their newly fitted.


Jan 19 2010 12:35PM
0 0
profile picture
Sveetski
Posts: 572 - Karma: 22
Ive slept in mine did wonders
Jan 19 2010 1:19PM
0 0
profile picture
SkiVato303
Posts: 6 - Karma: 10
I know this thread is really old but all you have to do is use an iron to flatten out that part of the liner that overlaps.
Dec 31 2016 3:03PM
0 0
profile picture
doitbig
Posts: 4818 - Karma: 315
I've seen "boot fitters" completely botch a heat mold on intuition wraps. It should sit perfectly flush with no bacon folds or weird creases. If it looks uniform I would try molding with the outside flap under the inside flap and see if the seam hits you in a better place. Other option would be to replace the wrap with a traditional tongue liner.
Jan 2 2017 1:29PM
0 0
profile picture
drifts
Posts: 605 - Karma: 4,393
I had the same thing. liner packed out and no pain now
Jan 2 2017 6:58PM
0 0
profile picture
FluidMotion
Posts: 65 - Karma: 31
Yes definitely check the overlap and make sure you're skiing in a thin sock that isn't bunching. If the overlap is really bugging you, you could swap the liners out for a tongue style Intuition Liner instead. These liners can also be re-molded many times so you may want to give that a shot as well, just don't overheat.
Jan 5 2017 12:21PM
0 0
profile picture
klibs
Posts: 260 - Karma: 182
My 2 cents...

I owned a pair of booters and now a pair of older drop kicks (which are far superior to the booters IMO). Got my booters fitted / heat molded / all that stuff and felt good about them.

The first 3-4 times I went skiing with the booters it was VERY painful in the ankle area and then all of a sudden they because extremely comfortable. By far the most comfortable boot I had worn after that. Like others said if you still haven't fully broken them in give it time. Also make sure your liner isn't positioned incorrectly.

When I got the drop kicks I just threw in my old liner and they were great right off the bat. Drop kicks are a bit more narrow and now after a few seasons the sides of my feet hurt for like 1-2 runs and then they feel great the whole day.

For those looking to buy a pair of full tilts for the first time I would recommend the drop kicks over the booter all day. Booter is much more flimsy and breakable.
Jan 5 2017 1:04PM
0 0
profile picture
patskis22
Posts: 364 - Karma: 1,148
SkiVato303I know this thread is really old but all you have to do is use an iron to flatten out that part of the liner that overlaps.


thank you legend
Dec 9 2024 8:04PM
0 0
All times are Eastern (-5)