Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Rossi Axial 2 brake help

profile picture
Commonwealth
Posts: 3729 - Karma: 11
I just clicked into my bindings for the first time since April. When I was putting my skis away I noticed that the spring detached from the brake. I had trouble getting it in, so I'm wondering if snapped a pin or something that holds the spring in the brake piece.

This is what it looks like now:

Click for larger image

I tried to hold a piece of paper so you can see where a tiny hole is, I'm assuming its for a pin of some sort.

Click for larger image

This is what it is supposed to look like:

Click for larger image

If I can't get the spring back in, how do I take to entire brake off of the plastic piece that goes under the heel of my boot? I'm willing to go brake-less until I get home.
Dec 8 2009 8:20PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Balls.
Dec 8 2009 8:21PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
This is what it looks like now:

Click for larger image

I tried to hold a piece of paper so you can see where a tiny hole is, I'm assuming its for a pin of some sort.

Click for larger image

This is what it is supposed to look like:

Click for larger image
Dec 8 2009 8:22PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Seriously? I'm full of fail right now.

http://img22.imageshack.us/img22/2672/dsc0033lq.jpg

http://img44.imageshack.us/img44/50/dsc0037xy.jpg

http://img6.imageshack.us/img6/7886/dsc0039ey.jpg
Dec 8 2009 8:24PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Bump, to get above the four Jiberish threads that are already above this. If possible, I'd like to get this fixed promptly & for. I want to get a couple of days in before I go home for break.
Dec 8 2009 8:41PM
0 0
profile picture
Malcolm
Posts: 15951 - Karma: 9,451
it looks like your bindings have a boner. the same thing to my axials when i tried pulling my ski out of the water at the water ramps. it got caught under a step and just broke. i think a replacement peice for that is like 15$ though
Dec 8 2009 8:46PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Hmmmm....any idea on how to take the whole brake out then?

Hopefully this works. 1) for ze lazies and 2) to redeem myself somewhat.

Click for larger image

Pin hole
Click for larger image

Supposed to be
Click for larger image
Dec 8 2009 8:52PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Wow guys - you've outdone yourselves this time. There are now NINE Jiberish threads above this one.

Only one Saga thread though...you're slacking.

Bump for a broke college kid that just wants to ski.
Dec 8 2009 10:15PM
0 0
profile picture
shaq_finn
Posts: 235 - Karma: 2,330
same thing happened to my brother. The shop fixed it for free in like 2 minutes
Dec 8 2009 10:37PM
0 0
profile picture
GNARBARSTAR
Posts: 639 - Karma: 16
you have to use something as a pin, cut a finishing nail about 1 cm long, put it threw the hole on the piece that is standing straight up, take the brake pad, you have to pry the 2 metel L tabs that the post slides in between out from the plastic casing. push the nail and post into the L Tabs from the top and squish the L tabs and casing back together with pliers or a vice
i dunno how else to explain it.
look at the other one for refrence
Dec 8 2009 11:59PM
0 0
profile picture
Commonwealth
Posts: 3729 - Karma: 11
Hmm, I figured there was a pin of some sort. But I'm in a dorm so I don't have anything to use, so I guess I'll just run it down to the shop...hopefully they don't charge me $20 or something stupid like that.
Dec 9 2009 9:31AM
0 0
profile picture
GNARBARSTAR
Posts: 639 - Karma: 16
bring a 6 pack it should be cool at most shops.
Dec 9 2009 1:07PM
0 0
All times are Eastern (-5)