Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What bindings adjust to the most boot sizes

profile picture
wazzucrewskier
Posts: 2269 - Karma: 151
So I am thinking about getting either some jesters or 916's which would accomodate the most boot sizes?  Or, if there is another binding that can adjust a lot let me know. 

Thanks in advance.
Oct 23 2009 6:54PM
0 0
profile picture
Slinger1x1
Posts: 8853 - Karma: 66
i mean, you could go pick up a pair of demo/rental bindings from a shop? the heals slide back and forth since different people rent them so they cant keep remounting. but i mean, i dont think there are any high end bindings with this system?
what boot sizes do you need to fit?
Oct 23 2009 7:32PM
0 0
profile picture
wazzucrewskier
Posts: 2269 - Karma: 151
i mean its not absolutely necessary i was just thinking if one adjusts a lot more i would get those.  basically i am just looking to make it so i can swap out with my buddies at lunch or whatever.  my buddy has demo bindings my boot sole is a 307 and his is a 335 so i doubt there will be any that will adjust that much but my other friends could try them since they have like 315s
Oct 23 2009 7:34PM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,883
either get demo bindings or you could ask the shop tech to mount them on the lowest end possible to your boot and then you can throw it to about 2 sizes larger.
Oct 23 2009 7:39PM
0 0
profile picture
jibjunkie
Posts: 3807 - Karma: 191
they made pivots with demo plates ive seen em go for cheap on ebay. plus you can adjust where they are set for park or pow
Oct 23 2009 8:30PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
schizos?
Oct 23 2009 8:58PM
0 0
profile picture
traylortrash
Posts: 1935 - Karma: 2,450
that is indeed what i did....
Oct 23 2009 9:15PM
0 0
profile picture
Slinger1x1
Posts: 8853 - Karma: 66
no, the heel and toe adjust together, you cant just move the toe or just move the heel, they move together
Oct 23 2009 9:33PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
ah. i didnt know, i was just throwing it out there.
Oct 24 2009 2:09AM
0 0
profile picture
Piste.Off
Posts: 11586 - Karma: 1,860
i have p12s with demo plates that i picked up for only $90 brand new, they work great too
Oct 24 2009 2:13AM
0 0
profile picture
Newschool_Pope
Posts: 2473 - Karma: 267
id say griffons with an extra long heel piece.
Oct 24 2009 5:58AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
PX12 adjust to 15mm smaller and 30mm larger than the boot you use to set the jig. More than any other binding.
Oct 24 2009 6:19AM
0 0
profile picture
Love_Wins.
Posts: 5536 - Karma: -1
You can get demo heel tracks for the Jester, gives you tons of a adjustability.
Only downside is that the toe is static, so when you change boot sizes it moves the mount point.
Also check out the Tyrolia railflex clamps, the 12s and 14s are said to be solid.
Oct 24 2009 6:40AM
0 0
All times are Eastern (-5)