Nendaz Backcountry Invitational

Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Armada JJ mounted with jester

profile picture
targheepark
Posts: 42 - Karma: 10

got my dream set up but the stupid jesters dont hold my dalbello boots down right.  there is a slight wiggle, any suggestions as to what i could do? i can switch out bindings but the last thing i want to do is re drill my skis again.

Oct 5 2009 6:34PM
0 0
profile picture
Piste.Off
Posts: 11586 - Karma: 1,860
are you sure the jesters aren't not set tight enough for your size boot? or are your heel and toe pads on your boots worn down?
Oct 5 2009 6:38PM
0 0
profile picture
Squid.
Posts: 1904 - Karma: 23
You could crank the forward pressure up
Oct 5 2009 7:21PM
0 0
profile picture
DHogg
Posts: 3462 - Karma: 237
It's a known problem with Full tilt and Krypton boots since they have a smaller toe block than most boots.. Marker please give us height adjustment! try contact warranty.
Oct 5 2009 7:29PM
0 0
profile picture
Thatdp
Posts: 500 - Karma: 168
My jjs are mounted with jesters and everything checks out fine is your tail peice pushed forward enouph??
Oct 5 2009 8:45PM
0 0
profile picture
targheepark
Posts: 42 - Karma: 10
got in touch with the marker rep.  told me dalbello makes there toe piece just at the bottom of the industry minimum and marker makes the toe binding height at the top of the industry standard.  hence, just a little bit of wear=toe wiggle.  there sending me a "anti friction plate" i can throw on to fix the problem.  saves the day but still gay....
Oct 27 2009 9:42PM
0 0
profile picture
MasterOz
Posts: 215 - Karma: 36
I had the same problem with my kryptons in my griffons. Its probably because your boots are old and ur toe piece is worn down. thats what happened to mine anyway. i got new dalbello il moros and they work fine in the bindings now.   Maybe u just need new boots...
Nov 23 2009 3:32PM
0 0
profile picture
loveyoursneakers
Posts: 1090 - Karma: 76
HAHAHAHA Dalbello
Nov 23 2009 4:29PM
0 0
profile picture
v0mdragon
Posts: 83 - Karma: 11
I've heard of this issue before, however my 09/10 rampages fit very snugly into my jesters...no wiggle, yet.

One thing I am worried about is the jesters biting into my toe piece of my boot. After two days, there was visible wear and tear on the toe piece just from trying to stomp into the binding, it doesn't affect performance right now, but will wear my boots down in the future
Nov 23 2009 4:59PM
0 0
profile picture
G.R.E.G.
Posts: 903 - Karma: 65
my jesters work perfectly with my il moros
Nov 23 2009 5:40PM
0 0
profile picture
mashdrop
Posts: 103 - Karma: 10
im thinking of getting jesters for my jj's,
what size breaks would be more suitable, the 110mm or 130mm?
+k for help
Nov 23 2009 6:26PM
0 0
profile picture
bibs_skibum
Posts: 4462 - Karma: 449
110. Fits fuckin perfectly even tho the JJ waist is 115.
Nov 23 2009 7:00PM
0 0
profile picture
mashdrop
Posts: 103 - Karma: 10
^
dope, thanks dude
Nov 23 2009 7:07PM
0 0
profile picture
Brian.
Posts: 466 - Karma: 210
i want to get griffons this year and have 2010 hotdoggers will it work fine?
Nov 25 2009 12:40AM
0 0
profile picture
Thatdp
Posts: 500 - Karma: 168
yes it will work
Nov 28 2009 10:34AM
0 0
All times are Eastern (-5)