Restless — An Alex Hall Portrait (Full Film) | Faction Skis

Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Metal rail vs pvc/hdpe

profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753

i'm expanding my setup, the situation i'm going towards is about 12ft(3.5m) height, drop down to a flat platform 3-4ft(1.20m) high
and then a second drop to zero....

now what rail should i get...
i was thinking about installing a flat down flat rail, from flat 6ft(2m)- down6ft(2m)flat10ft( 3m)
now my question is: would i have enough speed to get a metal rail or should i go for PVC ?

or do you have any other toughts about my design?

+k for constructive responses
Sep 4 2009 8:05AM
0 0
profile picture
mavinnowhere
Posts: 331 - Karma: 24
I would say that if your wanting to make a flat part in the middle of your ramp it would need to be pretty long. unless your planning to make an actual rail that ud hop onto from thee flat it would seem to be a waste of speed. I would say that rail is a little too long maybe make the flats shorter.
Sep 4 2009 6:03PM
0 0
profile picture
kalum.ko
Posts: 585 - Karma: 1,672
8ft flat 6ft down 8ft flat i think you could make in out of metal if you keep it waxed you should have no problems as long as your sppeed situation is decent
Sep 6 2009 12:14PM
0 0
profile picture
kalum.ko
Posts: 585 - Karma: 1,672
if you want maybe just make 3 diffenrent sections you'll have so many more options or just a big flat or a dfd
Sep 6 2009 12:15PM
0 0
All times are Eastern (-5)