Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Goggle Dying Tutorial

profile picture
zagfan5
Posts: 2608 - Karma: 144
did a tutorial on goggle dying since so many people have questions about it.

hope this helps answer all the questions you guys have on it.


16 years ago
0 0
profile picture
ScuffDUFF
Posts: 2027 - Karma: 143
nice  10/10
16 years ago
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,886
good work, very detailed, +K
16 years ago
0 0
profile picture
IanAvery-Leaf
Posts: 9933 - Karma: 9,433
Is this similar if i was doing boots, but this is a great video 10/10
16 years ago
0 0
profile picture
Slinger1x1
Posts: 8853 - Karma: 67
salt
the trick to getting it real dark is salt and constant heat
The hotter it is, the easier the dye takes to the plastic, and salt will raise the boiling point of the water.
just a good tip i learned form dying lacrosse heads
16 years ago
0 0
profile picture
kneehands
Posts: 2211 - Karma: 96
great tutorial, very in depth...i think i feel comfortable dying my riggers now
16 years ago
0 0
profile picture
TURRIINI
Posts: 123 - Karma: 772
i wanna dye my blue outriggers yellow. do u think that will look ok??
16 years ago
0 0
profile picture
Franny
Posts: 3980 - Karma: 77
+K
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
cant dye that. you can only dye darker. thats one thing i forgot to put in the video.
16 years ago
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
succes, i have a white Spys !

now considering a color....
16 years ago
0 0
profile picture
MRoden
Posts: 753 - Karma: 211
you used a lot of dye for that. When i dyed my boots i used two  packs of for a 10 gallon storage container.
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
i agree it probably was overkill, but i wanted the black to really set in. you can never be too concentrated wen it comes to black.
16 years ago
0 0
profile picture
CFD
Posts: 1009 - Karma: 197
good stuff, threads
16 years ago
0 0
profile picture
BRec
Posts: 566 - Karma: 39
samething for straps right?
16 years ago
0 0
profile picture
TOAST.
Posts: 7691 - Karma: 38,856
you could possibly sand it down until its white or really light blue and then dye it.  I have no idea if that will work just saying
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
only the denim riggers can be sanded down and dyed(and look good)

i tried sanding down a pair of rigs and dying them and it comes out sketchy and uneven looking. your better off trying to trade your blues for yellows.
16 years ago
0 0
profile picture
willy_baller
Posts: 1622 - Karma: 693
.
16 years ago
0 0
profile picture
masta_LE3B
Posts: 3397 - Karma: 62
well, if you use that dye extractor/bleach stuff that rit makes, it will deff bring the tone down, i got some blue out riggers to go yellow like that, but they were originally white then i dyed them blue, then bleached wich turned them yellow, cause if you do the bleach really strongly then it has a yellow tint rather than clear.
16 years ago
0 0
profile picture
loveyoursneakers
Posts: 1090 - Karma: 76
I was thinking of dying my Jesters do you think it would work.
16 years ago
0 0
profile picture
masta_LE3B
Posts: 3397 - Karma: 62
ya, ive dyed 3 pairs of bindings. it all works
16 years ago
0 0
profile picture
loveyoursneakers
Posts: 1090 - Karma: 76
Thx Buddy off to dye My Jesters.
16 years ago
0 0
profile picture
RRhighrider
Posts: 2143 - Karma: 1,158
threads for sober time
16 years ago
0 0
profile picture
C0LE
Posts: 316 - Karma: 475
thanks a lot. +k
16 years ago
0 0
profile picture
Brows.
Posts: 1497 - Karma: 13
are those my a frames?
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
^^yes sir
16 years ago
0 0
profile picture
JackVeen27
Posts: 149 - Karma: 13
nice vid
16 years ago
0 0
profile picture
Big_Spence
Posts: 16177 - Karma: 4,340
Please post pictures when you're done.
If yours work I might do mine. I think a bright green or purple would look SICK on my Seth's.
16 years ago
0 0
profile picture
kyman09
Posts: 203 - Karma: 10
How man, thanks so much for this vid, it really helps! I have some shitty old scott goggles that are white so I might try dying those. If I want to take the foam off, what should I use to re-glue them back on? also, when dying a strap, will it dye it to a solid colour or if say it's an oakley strap, will the "O" still remain on it? Again, thanks for the vid and hopefully i'll hear back from you.
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
as for the scott goggles, if your gonna take the foam off you can easily just put it back on with super glue. it holds and it isnt affected by water or cold, so its good for snow goggles.

as for dying the straps, the light color on the strap will always dye a solid color, and the black will stay black.
for instance, i dyed my text crowbar strap pink. all the white turned to a solid shade of pink, and the black text and the oakley O stayed black. so now i have a pink and black text strap instead of the previous white and black.
this is how it turned out
Click for larger image

the same goes for a black oakley strap with a white O. only the O would be dyed since its the only white part on the strap.
16 years ago
0 0
profile picture
Where-am-I
Posts: 1635 - Karma: 281
wait... so you get the water boiling put the die in stir it up, do you turn off the heat when you put the goggles in, i wouldn't want them to get melted
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
^^after the water is boiled and you mixed your dye in, take the pan off the burner, then put your goggles, rigs, strap, ect... in
16 years ago
0 0
profile picture
rj.
Posts: 3323 - Karma: 28
nice 10/10
16 years ago
0 0
profile picture
kyman09
Posts: 203 - Karma: 10
Thanks so much for the response zagfan5. This is a great thread 11.5/10! Hopefull I can turn my crappy goggles into something with at least a little bit of steeze. One more question, does it affect the goggles if they touch the bottom of the pot seeing as it is metal and will be extremly hot? Would it melt the plastic of the goggles? Anyways thanks again.
16 years ago
0 0
profile picture
*davidallen*
Posts: 191 - Karma: 49
super sick tutorial, my threads for later and 10/10 karma for you
16 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
if you take the water off the heat before you put the goggles in, they will be fine.
16 years ago
0 0
profile picture
3500
Posts: 44 - Karma: 13
Ya sweet tutorial +++K. Seems like your hands got dyed a little as you explained. Anyone who would be worried about that can always use those latex gloves to keep the hands clean...just a thought
15 years ago
0 0
profile picture
Malcolm
Posts: 15953 - Karma: 9,500
such a sick tutorial.
15 years ago
0 0
profile picture
Fev4ng
Posts: 225 - Karma: 62
10/10, much needed tut indeed
15 years ago
0 0
profile picture
TheWeaz
Posts: 803 - Karma: 1,903
is it possible to dye oakley text A frames. because they are glossy so would that affect the how it gets dyed
15 years ago
0 0
profile picture
El_Barto.
Posts: 11661 - Karma: 24,358
please elaborate
15 years ago
0 0
profile picture
Bloc_chain
Posts: 26051 - Karma: 4,431
anyone dye white EG2s? the plastic has some kind of glossy clear coat so i dont know if it will dye
15 years ago
0 0
profile picture
TheWeaz
Posts: 803 - Karma: 1,903
thats the same question i have about my text a frames
15 years ago
0 0
profile picture
GORlLLA
Posts: 1950 - Karma: 45
my threads
15 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
you can dye glossy text oakleys. i dyed my glossy text riggers and it workd perfect. still had the gloss on it too. it was sick.
15 years ago
0 0
profile picture
noo4
Posts: 23 - Karma: 28
i can't dye puprple goggles to white?
15 years ago
0 0
profile picture
Drop_Em
Posts: 1 - Karma: 10
Ok so today i dyed my googles and i just want to give out some info on what happend:

So i have some soldiers that were a really dark brown that faded to a yellow. I had and all black setup so i dyed them black.
First of all i think this really sealed the deal... i bought liquid. This was becuase i found an old pot to use and to get the water at the right height i had to use 28cups of water. So i was gonna buy a shit load of dye to get it really concertrated but then i realized that the powder might not disolve. So i bought two bottles of liquid and empyted them out.
Also i wanted everything to get dyed black so i just took the lense out and put everything in (also not sure if you can take them apart). Which worked fine, except that the little rigger things on the side that hold the strap were a different plastic which took differently to the dye, so that turned a darker brown like in this video, while the rest turn a solid black. So yea it worked really really well.
And lastly when i put the googles in, due to the heat the foam came off so just to let anyone know it might come of (which isnt a big deal it can b re glued like he said)

So yea anyone trying to dye soldiers its still fine to just putt everything but the lense in if u want a solid color
15 years ago
0 0
profile picture
austinmetsch
Posts: 525 - Karma: 17
does the die that's left over in the foam wear off on your face from wearing them? that would look super weird to have a die goggle tan.
15 years ago
0 0
profile picture
LMPJibbin
Posts: 1607 - Karma: 17
that was a solid tutorial, 10/10 to you sir
15 years ago
0 0
profile picture
JESSE.
Posts: 283 - Karma: 60
Post some pictures please.
15 years ago
0 0
profile picture
zagfan5
Posts: 2608 - Karma: 144
you have to wash out the dye in the foam with liquid laundry soap a few times so it gets all the dye out of the foam. after i dye them i rinse them with cold water, the with hot water and laundry soap, let it dry full, then repeat that 1 or 2 more times. letting it dry fully every time you repeat the rinsing with laundry soap step.
14 years ago
0 0
profile picture
Abangin
Posts: 59 - Karma: 15
10/10 man
14 years ago
0 0
All times are Eastern (-4); Currently it's 1:46PM