• Forums
  • Ski Gabber
  • Yo NS, Check out my first program. Find out what your DIN should be.

Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Yo NS, Check out my first program. Find out what your DIN should be.

profile picture
BigJew
Posts: 6974 - Karma: 79
http://drop.io/tr0v8lo/asset/din-calculator-exe


I've been screwing around with C++ lately and learning how to program. For my first program I made a little DIN calculator. I still don't really know how to program but this should work. This is exactly the same as using the chart below.

If you have a few seconds you can download it from the sight above, just click download under the Din Calculator side. It's not pretty, but it works... I think. Compare it to the chart below and tell if it works or not.

Thanks

Click for larger image
May 14 2009 11:52PM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
Ooops, I forgot the instructions for using the chart.


Step 1

Find the Release Code (letter A through P) which corresponds to the skier's weight, as well as the Release Code which corresponds to the skier's height. If they are not the same, choose the one that is closer to the top of the chart. For example if the skier's weight is 175 lbs. (code L) and the height is 5'7" (code K), choose code K as the correct line of the chart to be reading.
Step 2

Make the adjustments for skier type and age.
The selecton from Step 1 is for an "1" type skier. If the skier is "2" move down the chart one code. If the skier type is "3" move down the chart two codes. If the skier is age 9 or under, or age 50 or over, move up the chart one code.
Note and record the final Release Code letter for the skier.
Step 3

Reading on the corrected release code line from Step 2, find the column with the skier's boot length.
Within the box which corresponds to the skier's Release Code and his or her boot length is a number. This is to be used as the DIN setting for the toe and heel bindings.

May 14 2009 11:53PM
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
OMG ERIC ZILLINGER FUTURE ENGINEER!
May 14 2009 11:53PM
0 0
profile picture
@skiinmitch
Posts: 2781 - Karma: 78
its pretty good but it says my din should be at 6.5 when it actually should be at 8
May 14 2009 11:54PM
0 0
profile picture
TheBeardedOne
Posts: 2286 - Karma: 58
nice work dude c++ was a bitch.. kind of fun though
May 14 2009 11:57PM
0 0
profile picture
Malcolm
Posts: 15951 - Karma: 9,451
what thats sick! it crashed when i typed i dont know for my boot soul lengh in mm. Im just learning how to do shit like this haha im a real fucking noob though. check out my ballin website in my sig dawg
May 15 2009 12:01AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
Is that according to the chart or what you actually ski at?

It puts me at an 8 and I ride at 13.

If it's wrong with the chart could you give me your BSL, Weight, and Skier level?

It's a pain in the ass to check all 96 different possible combinations.
May 15 2009 12:02AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
your asking to be sued.
May 15 2009 12:34AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
fuck. i hate it when i do that.

you're asking to be sued.
May 15 2009 12:38AM
0 0
profile picture
@skiinmitch
Posts: 2781 - Karma: 78
i did it wrong ill try it again
May 15 2009 12:44AM
0 0
profile picture
skiminnesota
Posts: 9093 - Karma: 429
nice....
May 15 2009 12:46AM
0 0
profile picture
@skiinmitch
Posts: 2781 - Karma: 78
it WOKED the second time
May 15 2009 12:46AM
0 0
profile picture
@skiinmitch
Posts: 2781 - Karma: 78
it works!!!
May 15 2009 12:46AM
0 0
profile picture
SirFryanator
Posts: 11149 - Karma: 1,415
haha C++ was such a bitch when I tried it. I was a huge nerd from 4th to 7th grade, my friends and I made video games on the elementary school comps and programmed PONG using basic it was hillarious.
May 15 2009 12:50AM
0 0
profile picture
SirFryanator
Posts: 11149 - Karma: 1,415
whoah cut off the post. I was going to say that it didn't really work for me, it said I should be a 6. Since I pop out of my dins at 8 and I'm something like 2-3% body fat...125 lbs, 5'7"...seems like I should be a bit higher. You should figure out how to adjust it for different styles of skiing, like if you're a park skier, big mountain skier (crank dat shit up), or just a rec skier.

Interesting stuff though.
May 15 2009 12:51AM
0 0
profile picture
Malcolm
Posts: 15951 - Karma: 9,451
thats the beauty of living in canada!
May 15 2009 12:53AM
0 0
profile picture
Cataclyzm
Posts: 366 - Karma: 24
It does sound hillarious!!!

I kid!
May 15 2009 12:54AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
thats what they said about the piratebay in sweden or wherever... look where that got em
May 15 2009 12:58AM
0 0
profile picture
skiminnesota
Posts: 9093 - Karma: 429
holy shit. ive got 10% body fat and im still skinny as hell. lolz go eat some mickey D's. hahaha

haha i actually had my body fat measured this time last year and ive gained 3% body fat in one year... blah.

someone can correct me if i am wrong but i swear there is a difference between my FKS's and old POS sally's in terms of retention. i have those things a full 2 higher just to stay attached to my skis...
May 15 2009 12:58AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
yeah it depends on bindings too.
May 15 2009 12:59AM
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
Where did that get them? The site is still running...
May 15 2009 1:01AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
for now, but they got hit with some legal shit a couple months ago.
May 15 2009 1:02AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
I don't want to change it from the chart at all because then I'm probably liable for breaking your leg.





And for those of you who want to learn programming and make simple programs it's really not hard. I used the tutorial on learncpp.com and I'm only on the second page and I made that program.
May 15 2009 1:04AM
0 0
profile picture
Malcolm
Posts: 15951 - Karma: 9,451
sick! thanks im definitely going to do the tutorial
May 15 2009 1:06AM
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
Oh I should probably stop downloading form there... hhaha
May 15 2009 1:06AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
i highly doubt theyd go after individual people, unless you were downloading a SHITLOAD.


and they are appealing.
May 15 2009 1:10AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
You should get yourself on a quality private torrent site son. Nobody on TPB seeds so unless you like the nostalgic feeling of downloading at 56k speeds get someone to hook you up with an invite for something a bit more... exclusive. Or at least get into demonoid.
May 15 2009 1:10AM
0 0
profile picture
.KYLE.
Posts: 1891 - Karma: 59
You should really post up the source code. Good idea though
May 15 2009 1:15AM
0 0
profile picture
Casey
Posts: 7849 - Karma: 24,323
its kind of backwards to be like, "it says im a 6. I should be an 8." Good for you, but If I'm a tech and your DIN calculates to 6 I SHOULD set your bindings at 6 so you don't sue my ass.
May 15 2009 1:17AM
0 0
profile picture
Jordan
Posts: 4079 - Karma: 2,122
I mean I'm 5'11" and 130 lbs.

No fats on meees.


I can relate.
May 15 2009 1:25AM
0 0
profile picture
petesguitar1
Posts: 358 - Karma: 5
Not bad man, seems to run pretty well.
May 15 2009 1:30AM
0 0
profile picture
.KYLE.
Posts: 1891 - Karma: 59
ADD kicking in..... please...
May 15 2009 1:31AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
#include
using namespace std;
int main()
{    cout weight;
    cin.ignore ();
if (weight47){x=x+1;}
if (weight>56){x=x+1;}
if (weight>66){x=x+1;}
if (weight>78){x=x+1;}
if (weight>91){x=x+1;}
if (weight>107){x=x+1;}
if (weight>125){x=x+1;}
if (weight>147){x=x+1;}
if (weight>174){x=x+1;}
if (weight>209){x=x+1;}
if (weight>210){x=x+1;}
    cout > bsl;
if (bsl>250){y=y+1;}
if (bsl>270){y=y+1;}
if (bsl>290){y=y+1;}
if (bsl>310){y=y+1;}
if (bsl>330){y=y+1;}
    cout >skierlevel;
if (skierlevel>3){cout
May 15 2009 1:54AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
http://www.nfohump.com/forum/viewtopic.php?p=976199#976199

ok, source code is in that link, hopefully that works.

May 15 2009 2:00AM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
and the fancy GUI doesn't even automatically link things.

http://www.nfohump.com/forum/viewtopic.php?p=976199#976199
May 15 2009 2:02AM
0 0
profile picture
RRhighrider
Posts: 2140 - Karma: 1,124
worked for both me and my girlfriend chart wise.  the output was the same as her skis actually are but i ride mine higher then the chart says
May 15 2009 3:18PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 150
Depending on the company, not all DIN charts are identical
May 15 2009 5:07PM
0 0
profile picture
Literature
Posts: 13673 - Karma: 3,085
I think my bindings just broke the program. Oops.
May 15 2009 10:16PM
0 0
profile picture
meggers
Posts: 2094 - Karma: 70
i like it!! tells me what i should be according to the chart .... i dont ride at that...but the program seems to work. good job!
May 15 2009 10:20PM
0 0
profile picture
Yeezus
Posts: 3350 - Karma: 469
thats pretty cool
May 15 2009 11:08PM
0 0
profile picture
rostog
Posts: 202 - Karma: 16
Yeah but the owners are now in jail!
May 16 2009 5:56AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
Incredibly sloppy coding dude.
May 16 2009 6:29AM
0 0
profile picture
japanada
Posts: 13784 - Karma: 1,957
Pretty sweet program, you should make it so you can select 3+ as your skier type.
May 16 2009 3:04PM
0 0
profile picture
OhMyBosh
Posts: 5056 - Karma: 171
13s pushing it dude unless youre like 250lbs... my friend tore his ACL just skiing around, caught an edge and his ski didnt come off... his dins were on 13 and hes not a small guy.
May 16 2009 4:04PM
0 0
profile picture
blackoutbill
Posts: 2918 - Karma: 282
It got me right!
May 16 2009 5:06PM
0 0
profile picture
Greg_o
Posts: 316 - Karma: 82
You read the part where he said he was learning right?
May 16 2009 5:10PM
0 0
profile picture
tommyp1ckles
Posts: 1337 - Karma: 55
i just kept tightening until i could do a tip stand which was around 8
May 16 2009 6:29PM
0 0
profile picture
thegreyarea
Posts: 3265 - Karma: 34
Wow! That's a lot of code. Nice job for a first program. As you learn more, try cleaning up the logic in your old programs. The first time you do it will be tough, but it's all about learning to think a different way.

For instance, this block of code is a lot of if statements. The hardcoded weights have no patterns (e.g. they don't increment equally), but your x=x+1 is a consistent pattern. What you wrote works, but can be shortened.

if (weight>29){x=x+1;}
if (weight>38){x=x+1;}
if (weight>47){x=x+1;}
if (weight>56){x=x+1;}
if (weight>66){x=x+1;}
if (weight>78){x=x+1;}
if (weight>91){x=x+1;}
if (weight>107){x=x+1;}
if (weight>125){x=x+1;}
if (weight>147){x=x+1;}
if (weight>174){x=x+1;}
if (weight>209){x=x+1;}
if (weight>210){x=x+1;}

Shortened:
// initialize this at the top
int length = 13;
int weights[length] = { 29, 38, 47, 56, 66, 78, 91, 107, 125, 147, 174, 209, 210 };

// Instead of the if statements above
for (int i = 0; i < length; i++)
if (weights[x] >= weight)
break;
x = i;

If you can figure the above out, you're on a really good path.
May 16 2009 6:59PM
0 0
profile picture
thegreyarea
Posts: 3265 - Karma: 34
^ haha I made a mistake:) It should be if (weights[x]
May 16 2009 7:01PM
0 0
profile picture
TonySeibert
Posts: 109 - Karma: 328
way off man, i cant stay in my shit unless the dins at 15+ and im 5'10" 185 lbs
May 17 2009 5:27AM
0 0
profile picture
k-rob
Posts: 14217 - Karma: 2,891
right but thevye ben hit with swedes not amricans. the swedsh govrenmnt is nothin like the candain goverment, the swede govrment has taken to making shit up and pssing it as law withn two months. besids, on the same grnds pitratebay was sued on they could sue google as well,
May 17 2009 5:41AM
0 0
All times are Eastern (-5)