Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

FS: Rossignol Axial 100 Bindings with WIDE BRAKES - $55 Shipped!

profile picture
GeeeF
Posts: 474 - Karma: 34

You read it right folks! These fine bindings can be yours for $55 shipped (USPS Priority Mail).

DIN range from 3-10, burly heel with a fair bit of metal, great condition! Nice wide 100mm perfectly custom bent brakes!! Upward toe release.

Trades WELCOME! Paypal only though, no checks!

Pics:

Click for larger image

Click for larger image

Click for larger image

Apr 8 2009 12:49PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
I'm going to bump this aggressively til they're sold. Here goes!
Apr 8 2009 4:29PM
0 0
profile picture
En_Route
Posts: 740 - Karma: 45
how wide are the breaks.
Apr 8 2009 4:56PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
100mm give or take a few.
Apr 8 2009 5:23PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump!
Apr 8 2009 7:09PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump!
Apr 8 2009 11:24PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
morning bump!
Apr 9 2009 9:48AM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump
Apr 9 2009 2:24PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
BUMP!
Apr 9 2009 4:20PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump
Apr 9 2009 8:29PM
0 0
profile picture
blackoutbill
Posts: 2918 - Karma: 282
Great price. Too bad I need a binding with a din higher than 10. Bump
Apr 9 2009 8:54PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,272
how do you get these brake arms in a vice? i can bend all other brakes but these things are gonna be the death of me
Apr 9 2009 9:00PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
there's a great explanation on TGR - you just put the brake end in the vice, heat that sucker to red hot with a blow torch, bend the whole unit up to straight, cool it with a water spray bottle, torch the new bend point to red hot, and bend it down again.

Took about an hour and a half, and it was fun as hell cuz i made metal glow bright red :)
Apr 9 2009 9:14PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,272
but the part of the arm between the bend and the housing isn't long enough to fit into a vise
Apr 9 2009 10:59PM
0 0
profile picture
Love_Wins.
Posts: 5536 - Karma: -1
I take the arms out of the housing...
Apr 9 2009 11:21PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
right, you clamp the end that sticks in the snow in the vice, with the plastic grippy thing on it. that way you can literally grab the entire brake assembly and rotate it upwards to straighten the brake arm.

SOMEBODY BUY THESE ALREADY DAMMIT!
Apr 9 2009 11:24PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
you can't take the pivot arms out of the housing without magical powers though...

fks is a different story, but pivots are notorious.
Apr 9 2009 11:25PM
0 0
profile picture
Love_Wins.
Posts: 5536 - Karma: -1
Well, I must be endowed from on high...


I've done it with every set of pivot brakes I've ever bent.
I also don't use a torch or any heat whatsoever.
Apr 9 2009 11:53PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,272
yeah fks are easy for me, i got really good at taking them apart and bending and everything but i've never done a pair of pivots
Apr 10 2009 12:19AM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
nice! you should post up a thread on how to get the brake arms out of the pivots! although the heating method is way fun...
Apr 10 2009 12:33AM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bizzump
Apr 10 2009 1:08PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump!
Apr 12 2009 12:30PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bumpppp
Apr 12 2009 4:27PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump
Apr 12 2009 8:54PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
BUMP CHUMPS!
Apr 13 2009 1:28PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
you buy, you buy NOW!
Apr 13 2009 3:49PM
0 0
profile picture
GeeeF
Posts: 474 - Karma: 34
bump
Apr 13 2009 9:06PM
0 0
All times are Eastern (-5)