Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I need some help...

profile picture
sam_well
Posts: 49 - Karma: 9
 just bought a new pair of AR6's and since i don't want to spend money on bindings i'm just transferring my old bindings to my new skis. The bindings are 07 look PX12 JIBS mounted to 08 trouble makers. Every screw came out but one of the screws on the toe peice was hella stripped and was impossible to get out with a screwdriver. I decided to drill it out (drill off the head) but nothing seems to be working. Any ideas on how to get this thing out? I was thinking maybe the shop i get my AR6's mounted at would be able to get it out for me and have a new screw to put in...

Here are some pics:

Click for larger image

It was getting so hot when i was drilling the plastic started to melt so i put oil on it while drilling...

Click for larger image


Feb 16 2009 3:47PM
0 0
profile picture
cobra_commander
Posts: 16909 - Karma: 4,686
cut it off.
Feb 16 2009 3:50PM
0 0
profile picture
sam_well
Posts: 49 - Karma: 9

Click for larger image



Click for larger image
Feb 16 2009 3:52PM
0 0
profile picture
sam_well
Posts: 49 - Karma: 9
i cant fit a saw under it.
Feb 16 2009 3:53PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 150
Can't the toepiece rotate if every screw but one is out?
Sometimes that is an option to getting it out

You could try using a dremel and cutting a line in the top where a philips head screwdriver could then get it out

Alternately maybe a really thin hacksaw between the binding and ski

Or get EZ-Out - i don't know if it will work with what is left of the screwhead though
Feb 16 2009 4:02PM
0 0
All times are Eastern (-5)