Replying to Trick Tip new thread!

A 360 is an important "basics" trick to be able to do, because it can be done in almost as hopeful as any time, plus it is incredibly comfortable to do great. This is the trick that makes you get started.

When you put a 360 loosen up blocker and you dare to do more and more advanced tricks. Test and put up an seafty grab , because it keeps up the body so you get better control, and that it is pretty simple.

1 When you try a 360, it is best to test in a soft, fairly small bigjump with flat kick. Take some runs till you are safe in the jump. In the beginning, it may be wise to make no grab, but concentrate on the actual spinning. Try like before without skis on the ground so you know which way that feels natural to spin about. Most spins to the left.

2 Run toward the jump and look at the kicker. Start spinning with your arms as soon as you leave the jump and look around your shoulder. Try to keep looking towards the horizon, look for the very top is the forward weight of the landing and look too much down to the tail lands you with backward weight.

3 Now it's just to keep the rotation by looking around the shoulder, and the search after landing with your eyes. Once you see the landing, you should determine whether you must pull up the legs to the body to get around or if you have a good time. Take the land stable and slip away.

4 If you are eager to put on a grab, you should first learn to put 360 perfect, so you do not need to think about spinning, and then do exactly the same, only difference is to take in a little more because Grab tend to slow down your spin. You should grab when you have left kicker and then release it late, the later you release the ski, the cooler is you gonna be :-)

Now we going to the flair it's also a basic trick in the pipe and when you make it looks very clean.


A flair is back, with 180 volts, but when you do it in the halfpipe so seeks to allocate spin across spin so you do not get around 180 n. When you try the first time, be sure to do it in a halfpipe you feel comfortable in, with a perfect hit, so you land in the buoy and not the bottom, and a soft landing. The first time, it is often best with a self-built quarter pipe with lössnö soft landing.

Learn first: Stable halfpipe Airplane with beautiful Grabs
Back Flip in the usual jump

1 Select a hit in the pipe that feels good, it should be moderately steep, and you should not need the press to not land flat. Run up a few times, o is the kick o the air. Try to find a sense of how much you must take in order to work around volts.

2 When you do that, we must not hesitate. Go up against hiten with the speed you feel safe with, but do not go too slow, was aggressive. Focus on your selection here.

3 Now you have a flair. Wait to drag around spin to you at the top of the buoy, the press too early, you will either land on top of the shelf or thump in the head in the wall, press from the late, you will not be around. When your ski tips just starting to get over the edge, leaning back as you get when you do a back flip, but watch your head towards the end of the halfpipe where your friends are and check.

4 Draw the knees to the body and take a grab, if you feel like it. Be cool and keep in volts. Do you right you will see the landing all the time, so there is no problem to locate them. When you are about to come down and you will be able to determine if you need to spin more, or if you will stop the rotation. The most common beginner's mistake is that people in rotating volte but over rotates spins, therefore you should be pretty quiet in the beginning when you rotate.

5 Land stable and slip away with a smile (or crash violently and refuse to trust me again)

Now we moving on to the cork 720
hen you are taught some basic spins to 360, 540 and 720, so you probably want to develop them, right? Since cork is a good thing to hand. A Cork 720 is actually a normal 720, but instead of turning completely straight, then leaning Monday it down a bit, so it is a little crooked in the air.

Make a cork 720 and "overcork", ie cork a little too much, so there will be a dspin 720. But now it is important to distinguish between the concepts. when you test the first time, so be sure to have a soft landing, because you are wrong and will probably not land completely straight all times.

1 Take you to a large between bigjump, or build yourself a jump. Hope should be sufficiently large in order for you to take you around a 720 without taking in everything you can. Run up with some common 720's, they needed you to.

2 As you approach uthoppet, as the rotation as a regular 720, except that you look a little more down around your shoulder, but not too much, you will not see your tail. After one lap, you should be ihopkrupen, with the skis pointing slightly upwards. Keep only in the rotation and look with your eyes around the shaft.

3 Now you should be able to see the landing, and assess how much you have left. Pull skis under you and focus on where to land. At this stage of the rotation, it is easy to detect that it is totally wrong and will land on the page. As has been swirling for a long time in the horizontal and not withdrawn in time. The first few times it is easy to trick most becomes a dspin, but then, just go up again and try out the cork.

Often think that it is difficult to draw a cork 720 than a dspin 720, since inverting more of a dspin and then you will see the landing before. Many people feel that it is jättesvårt not to cork too much, it comes to finding that perfect angle, so you either do or will dspin up straight. When you learn this snurrer, just put on the grab, and remember: do not give up!

I will post more trick tips later but it takes some time to write and sorry for my english cos it's not the best in the world, pm me if you have any questions I will be glad to help you out and please throw me a comment cos I wanna know what you thought of this so if I gonna post more tell me what tricks you wanna have I post them here, and please give me some Karma if you thought this was good, CHEERS
++K to me moahahh
/OJ