Restless — An Alex Hall Portrait (Full Film) | Faction Skis

Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

building rail/box

profile picture
xskier2
Posts: 29 - Karma: 10
Anybody have any info or no of a website were i can learn how to build a rail or box/rail??



THANKS
Dec 23 2003 8:38PM
0 0
profile picture
binx
Posts: 256 - Karma: 10
do you want a bargain rail, or like a metal welded one?
Dec 23 2003 8:39PM
0 0
profile picture
rodeo7
Posts: 891 - Karma: 12
there are heaps of guys that if you asked anough people, they would be able to help.
'Yeaaa NIICE PASSSS ASSSHOOLLEE' - 1242 Bonus

'Snowboarding, its just so hot right now!' Armada shirt
Dec 23 2003 8:46PM
0 0
profile picture
line1260skier
Posts: 1570 - Karma: 16
what is a good surface for boxes that atach easy? plexiglass?
I cant spell so dont make fun of me
Dec 23 2003 11:46PM
0 0
profile picture
Capt.Flannel
Posts: 10928 - Karma: 36
do any of you know how much of a pain it is to cut plexiglass? angle iron will work.
Dec 23 2003 11:47PM
0 0
profile picture
line1260skier
Posts: 1570 - Karma: 16
will is slide good?
I cant spell so dont make fun of me
Dec 23 2003 11:50PM
0 0
profile picture
Capt.Flannel
Posts: 10928 - Karma: 36
its metal, just like a rail, so wax it up or sumthin and hit it.
Dec 23 2003 11:53PM
0 0
profile picture
line1260skier
Posts: 1570 - Karma: 16
plexiglass is metal?
I cant spell so dont make fun of me
Dec 23 2003 11:54PM
0 0
profile picture
line1260skier
Posts: 1570 - Karma: 16
ooo nm im retarted
I cant spell so dont make fun of me
Dec 23 2003 11:59PM
0 0
profile picture
RodeoKid
Posts: 80 - Karma: 14
coated particle board and the angle iron are defenatly the best. If you want info on types of rails to build just message me, wait we should start a construction cult

Striker Productions
Missoula MT
Dec 24 2003 2:42AM
0 0
profile picture
KZA
Posts: 3304 - Karma: 301
yeh make it
Dec 24 2003 10:43AM
0 0
profile picture
*cowboy*
Posts: 8830 - Karma: 214
If your making a box, plexiglass in an option. it doesnt hold up as well in the cold weather and will eventually crack and break over time.. Lexan is the best material you could use and you can (supposedly) pick it up at Home Depot or Lowes..

If your building a rail, you can go with either pvc or metal.. Pvc slides awesome and lots of people prefer it over metal. Also, pvc is cheaper but doesnt hold up AS well as metal does. If you go with pvc, you can make the base out of wood or anything you'd like.


-Jason
Dec 24 2003 11:03AM
0 0
profile picture
*cowboy*
Posts: 8830 - Karma: 214
ah, and lexan is pretty expensive I think.. So check it out before you build a beastly box.


-Jason
Dec 24 2003 11:04AM
0 0
profile picture
P-JO
Posts: 6853 - Karma: 75
just use common sense.. and build some shit.. its easy, eh?




-Pat
Dec 24 2003 1:13PM
0 0
profile picture
Colt45er
Posts: 1650 - Karma: 336
can u use pvc for a box?
Oct 26 2004 9:59AM
0 0
profile picture
kinz
Posts: 116 - Karma: 10
When using PVC for a rail how do you attach it to the base.

Im thinkning 8' double 2' PVC to a 2x4.

If i screw in to the PVC from below will they not tear out when you slide.

Anybody got any tips on a better way to do this.


Life is tough. Get over it!!!
Oct 26 2004 10:41AM
0 0
profile picture
meb9486
Posts: 740 - Karma: 10
i have a pvc rail but t sucks and im main a new one. just wondering if that liquid nails stuff actually works o will the pvc just rip off the wood
__________________
'Over time, most people experience life involving love, suffering, compassion and an unspeakable drive for something new...For me there's skiing, nothing more nothing less and it encompasses everything, everyday I'm out there.'
-Pep Fujas-
Oct 26 2004 10:45AM
0 0
profile picture
kinz
Posts: 116 - Karma: 10
anybody?
Life is tough. Get over it!!!
Oct 26 2004 11:15AM
0 0
profile picture
VC
Posts: 1011 - Karma: 12
pvc is fucking horrible, learn to weld, its not that hard
Oct 26 2004 12:30PM
0 0
profile picture
fizzlefry
Posts: 4662 - Karma: 15
yeah but its a million times cheaper and it dosent fuck your skis
Oct 26 2004 1:48PM
0 0
profile picture
nothanks
Posts: 13551 - Karma: 31
search bar
skiing is fun
Oct 26 2004 2:09PM
0 0
profile picture
eastAR5
Posts: 15084 - Karma: 730
plexyglass is mad hard to cut.. and lexan is soo expensive





Park Life
Oct 26 2004 2:11PM
0 0
profile picture
Crock360
Posts: 2100 - Karma: 23
liquid nails wont do shit for attaching the PVC to anything. I've never built one, but why not drill a small 1/4' hole in the top, and then use an extension for your drill and screw it through the bottom to whatever is your base...You can always fill the top hole with something else.


~Crock

Ski like you fuck; fast and hard with a stupid grin on your face.
Oct 26 2004 2:12PM
0 0
profile picture
Mike.Records
Posts: 1311 - Karma: 756
I dont think this is the best way but it is easy. Just stick those metal v's on a 2'4;
LOVELAND OPENS FRIDAY
Oct 26 2004 2:19PM
0 0
profile picture
!van
Posts: 198 - Karma: 11
If your interested in making some metal rails, search for it in the search bar in the 'articles' section. Theres a good one about it.




'Wherever you go, there you are.'
Oct 26 2004 2:21PM
0 0
profile picture
NickMartini
Posts: 7761 - Karma: 8,356
were can you get lexan?



-Nick Martini
Stept Productions
go buy 'to whom it may concern'
Liberty skis
So what?..... So lets dance!
Oct 26 2004 2:44PM
0 0
profile picture
nothanks
Posts: 13551 - Karma: 31



.
Oct 26 2004 3:08PM
0 0
profile picture
live4skiing
Posts: 218 - Karma: 10
if you're going to use pvc for a rail i suggest you drill holes in the top of the rail and put screws in from there to the base which in this case is 2x4s...
--------------------------------------
Don't you hate it when you have a cocktail fork and you stab yourself in the eye!? God I hate that!
Oct 26 2004 3:19PM
0 0
profile picture
scratchproteen
Posts: 5173 - Karma: 286
what about bending pvc to like if you want a rainbow box could you take like 3 smaller pvc pipes place them side by side to do this can you bend em?
Oct 26 2004 3:23PM
0 0
profile picture
scratchproteen
Posts: 5173 - Karma: 286
^ scratch that there is no way to get the wood to bend unless you can purchase warped wood
Oct 26 2004 3:24PM
0 0
profile picture
dead
Posts: 1635 - Karma: 11
Form ply for a narower box (1 foot wide) its just wood with a special coating it and works really well.


**CCR**
Oct 26 2004 3:54PM
0 0
profile picture
Kev
Posts: 7411 - Karma: 35
i tihnk im going to make mine out of pvc piping, just double 2 up. or someone found like a plastic deck railing or something you can buy? just go to home depot and look around,
Sponsored By Your Mom
Drop Cliff's, Not Bombs
Make Turns, Not War
Bomb Hills, Not People
Member #259
Oct 26 2004 3:59PM
0 0
profile picture
winterkid33
Posts: 2267 - Karma: 52
I just bought Six 3/4 inch pvc pipes and a big ass sheet of Lexan from Home depot. It all cost $100 and with it i'll be able to build two ten foot rails using three 3/4 pvc. And with the lexan Im gonna make a twelve foot long box thats 1 1/2 feet wide its gonna have one 2 inch pvc on each side its gonna be soo hot! I'll post pics when I finish it. Lexan Is the expensive part it was $75 for a 6'x3'x.05' peice its so flexible though and 250 times stronger then glass. (THats what it said on the package.)
Dec 8 2004 9:53PM
0 0
profile picture
Spam_Man_1500
Posts: 1358 - Karma: 12
Check it out, I'm hecka mean:

















OOOH how about making a box out of pvc? Just screw like four next to each other or something, that sounds like it might work, and I think I've seen a picture of it somewhere...
Dec 9 2004 1:22AM
0 0
profile picture
AZskier4life
Posts: 29 - Karma: 10
stick it up a 13 year olds ass hole
Dec 9 2004 1:57AM
0 0
profile picture
twintipteles
Posts: 2954 - Karma: 13
y doesnt anyone just drill up through the 2x4 into the pvc, thats what I always do and it works fine, and i dont have holes in the top of my rail
Dec 9 2004 9:11AM
0 0
profile picture
winterkid33
Posts: 2267 - Karma: 52
unless your only going to slide boxes side ways then you cant make boxs out of small pvc pipes. when you spin you edge or entire ski would likely fall into the groove. It would work on small spins but if you tryin some serious spinnin on the box youll fall every time. JUst get a PVC sheet same matierial but completly flat. Way cheaper easier safer just better. Get LExan if you can afford it
Dec 9 2004 6:42PM
0 0
profile picture
saskskier
Posts: 4774 - Karma: 10,005
what about that puck board stuff? would that make a good box surface?






'This sucks. Let's go monoskiing.'
-McConkey
Dec 9 2004 6:47PM
0 0
profile picture
SkiRoundtopRules
Posts: 158 - Karma: 10
Plexiglass is very easy to cut if you have the right tool to do it. I had to cut a 6 X 3 foot sheet in half down the middle and the cut is smooth and straight. You can get tools that have like a hook on them made for cutting it.
Dec 9 2004 6:51PM
0 0
profile picture
winterkid33
Posts: 2267 - Karma: 52
yeah I forgot that one but LExan is by far the best its is hella strong many resorts dont even use it cause its too pricy. THats when you find rips and gouges in the surface which will through you. when I was in HOme depot Before I was sure lexan was the best stuff I took out a pocket knife and went to work on the stuff. No scratches! I look close and could see where I was scratching but nothin that would affect its rideing. plexiglass is real good to not as tuff but still good. The LExan cost me $75 for a 3'x6' section so its real expensive. Me and three friends all put in so its no soo mad. I need info on how to make a strong structure. I am planning to abuse this box.
Dec 9 2004 6:52PM
0 0
profile picture
Bangor
Posts: 9599 - Karma: 129
ok, you've got a 3x6 (in feet) sheet of lexan. rip that in half, so now you have two 1.5x6 sheets. then you're going to get a bunch of 2x4 boards, and build the box. think about it, 4 long rails running on each 4 'corners' of the long box. then brace them together. put plywood inbetween the boards on the top, and then brace the plywood from underneath. slap the lexan on top, drill & countersink holes (this will put the screws below the surface level of the lexan, so you can't catch them) into the lexan, screw in the screws, and you're set.
______________________

- Ian

'Thank god she had the decency to swirve her truck into a ditch.'

- skiierman, on almost getting in an accident.



'How does one go about becoming a judge for one of these contests? Do judges get to have sex with the contestants?'

- rebel, on the Miss Teen Canada Contest



~~Phunkin Phatt Phreerider~~
Dec 9 2004 6:59PM
0 0
profile picture
winterkid33
Posts: 2267 - Karma: 52
thanks alot I am using a glue to attach the lexan cause its only .05 INches think so you can put a screw into it. If you have pictures or a more detailed description that would be great but I think I'll figure some way to make it work nice. Im also gonna put two PVC rails onto each edge of the box which will make it wider and create more possibilities.
Dec 9 2004 7:05PM
0 0
profile picture
SkiCrazeSinclair
Posts: 62 - Karma: 10
ask this guy...his name for the site is ...mcstooge
Dec 9 2004 7:06PM
0 0
All times are Eastern (-5)