Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
How do i adjust the heelpiece on my Pivot 12's?
Posts: 2847
-
Karma: 55
alright so i have Look PIVOT 12's on my anthems and bacons and i will be getting new boots tomorrow. they measure like 4mm longer shellwise than my other boots so i wanna know how to adjust the heelpieces back to accomodate the new boots. any help? i know how to do forward pressure, function test etc, i just dont konw how to move them back.
and please dont tell me just to bring them to a shop because i work at one and just would rather do it myself real quick, adjust to make sure they release fine and call it good.
thanks.
Posts: 4867
-
Karma: 350
If you know how to do forward pressure, you know how to move them back :)
Posts: 2847
-
Karma: 55
alright thats what i figured thanks
Posts: 11586
-
Karma: 1,860
there should be a metal bar on the very back of the heel, put a screw driver under the bar and pull up till it clicks, then move your binding and pull out scre driver to lock
Posts: 3312
-
Karma: 444
thats on the PX series bindings....not the pivots....there is a screw on the back of the heelpiece similar to those on marker bindings....you twist it and a worm screw moves the heelpiece
Posts: 11586
-
Karma: 1,860
oh wow, sorry I read that completely wrong
Posts: 2847
-
Karma: 55
word thats what i kinda figured out. and from there to set the forward pressure just make sure that the top of the screw is flush with the bottom of the little carved out half moon thing above it. i got it thanks
All times are Eastern (-5)