Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Jester binding help!!!!

profile picture
0123456789
Posts: 9226 - Karma: 148
ok so ive got last years jester if that matters, now refer to the drawing.

Click for larger image

see that red space? thats what my boot is like, it wiggles up, and down. how can i change that? do i need to bring it to a shop? acuse i did and they didnt change shit. also is that the forward pressure?

thanks NS!
Nov 23 2008 4:30PM
0 0
profile picture
IanAvery-Leaf
Posts: 9931 - Karma: 9,399
Haha nice drawing! That made me laugh. Sorry man I cant help.
Nov 23 2008 6:38PM
0 0
profile picture
Klick_2_klaim
Posts: 3396 - Karma: 25
HAHHAHAHAHA very nice!

check your forward pressure. the screw in the back should be flush with the binding.

if that doesnt work, get new boots cause youve worn your toe down too much. OR get a new toe pad drilled in.
Nov 23 2008 6:54PM
0 0
profile picture
0123456789
Posts: 9226 - Karma: 148
boots are brand new, and whats the forward pressure? how do i adjust it?
Nov 23 2008 7:24PM
0 0
profile picture
GatoGordo
Posts: 1496 - Karma: 10
How much room is there? I have the same thing on my griffons, but its very minimal. If there is barely any movement, its fine, but if there is a lot, there could be a solution. You boot could be worn down a lot in the toe piece, and most boots are able to have a plastic riser put on the bottom. If this gap is concerning you, take them to where you got them mounted, and see if they can fix it.
Nov 23 2008 7:28PM
0 0
profile picture
0123456789
Posts: 9226 - Karma: 148
boots are new so thats not the prob. i bouth skis last year and brought them to this shop, expeting to need a remount cause i went up 2 boot sizes. they didnt remount or fix the problem when i told them, and still charged me $30. so im looking for a way to do it my self, if its even possible. also theres id guess 3mm of wiggle room
Nov 23 2008 7:31PM
0 0
profile picture
RightCoastRiderK2
Posts: 39 - Karma: 41
i have the same bindings and its easy to adjust it. what you need to do is put your boot into the binding. then on the heel piece there is a screw on the back. if that is not flush then just tighten that screw till it is flush. if that screw is already flush then there might be something wrong with your boots or something and then i would just take it back to the shop.
Nov 23 2008 10:13PM
0 0
profile picture
0123456789
Posts: 9226 - Karma: 148
the screw is only flush when the boots are clicked in. so im just gonna bring it to theshop and see if they will do it
Nov 23 2008 10:16PM
0 0
profile picture
whattheshit
Posts: 6562 - Karma: 107
looks like you need a stapler.
Nov 23 2008 10:41PM
0 0
profile picture
huge-go
Posts: 1451 - Karma: 33
The toe height on the jesters adjusts automatically, so your bindings must be fucked.
Nov 23 2008 11:31PM
0 0
profile picture
Klick_2_klaim
Posts: 3396 - Karma: 25
indeed!
Nov 23 2008 11:59PM
0 0
All times are Eastern (-5)