Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Switching bindings back and forth?
Posts: 2247
-
Karma: 63
is it alright to switch a pair of bindings between skis once or twice? I really have no clue since i have never done it? I am assuming it should fine as long as i seal the holes when putting the binding back on but anyone with some experience want to shed some light on this for me
Posts: 6561
-
Karma: 1,375
yea you can maybe once, as long as the screw is kind of hard to tighten in. some resistance you know. make sure to wood glue it too. or you could epoxy the second time.
Posts: 143
-
Karma: 129
ya its ok but you need to be careful here are some things to keep in mind.
all ways refill holes with wood glue
even more important is make sure you don't over tighten the screws if you do you will strip the threads from the hole that the drill made . if this happens the screw wont hold and you will pull the binding out of the ski.
All times are Eastern (-5)
