ok so i picked my skis up from getting mounted today. I went to work right after when i get home i go to check my skis out and i noticed one of the brakes were loose. So i take it off. I figured the tech didn't get it in there just right, so as i look i realize that the had bent the little prongs under it that attach to the heel piece so i bend them back. When i put the brakes back on i couldnt tighten them in. The screw would go half way in. So i start to get mad. I grab an extra pair of bindings i had laying around and i took the brakes off. Here the tech had used a mounting screw to put my brakes on and it left a hole in my skis because it was too long. Now im just pissed so i fixed everything and if it wasnt 11 oclock id go to the shop and bitch him out. Im going first thing tomorrow. Heres the pictures of the screws (longest one was used to hold brakes in shortest was the one he was supposed to use penny is for comparison)
