Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

P12 HELP

profile picture
G.R.E.G.
Posts: 903 - Karma: 65
Hey these are both two kinda noobish questions but I need to know quick and the shop I work at doesnt do too much with these bindings so I dont know this. I am taking the P12s off a pair of skis I have right now and I dont know where the screws for the heel pieces are. Like its just a solid piece of plastic on the heel so i dont know where the screws are. Can anyone help me out on tht one? The second question I could find using the searchbar but since I created a thread I'll ask it here. I am taking a pair of P12s off some TMs and putting them on my T-Halls which are currently centermounted for Axial2 120s which is the same binding/screw pattern but I would like them to still be mounted center. Could I just put my P12s in the existing holes or should I mount like half a cm back or helicoil or what? Thanks
Feb 1 2008 12:32PM
0 0
profile picture
Tucks
Posts: 2120 - Karma: 161
you can mount in same holes just put some epoxy to strengthen the rivets in the screw hole. It should work perfect it they are the exact pattern. I don't really know what you are asking about the binding screw holes though
Feb 1 2008 12:35PM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
To remove the heel (given these are p12's and not px12's):

There is a forward pressure screw on the back of the binding that will move the heel back and forth.  Unscrew it all the way, pull the heel back, and you'll see the track it's mounted on.  Take those screws out and you're done. 
Feb 1 2008 1:05PM
0 0
profile picture
esuskee
Posts: 314 - Karma: 10
this is very correct.
Feb 1 2008 1:08PM
0 0
profile picture
G.R.E.G.
Posts: 903 - Karma: 65
Thank you Aenigma and Tucks... exactly what I needed
Feb 1 2008 1:14PM
0 0
profile picture
WONTON
Posts: 6951 - Karma: 55
nice...the thread cut the bullshit and went straight to helpin. This is a first
Feb 1 2008 1:37PM
0 0
All times are Eastern (-5)