Boundless — A Sam Anthamatten Portrait (Full Film) | Faction Skis | 4K

Member of the Month

je_t.aime_canard
January, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Firewire Help....wont work????

profile picture
Kgallacher
Posts: 736 - Karma: 471
Ok so my computer didnt have a firewire port so i had to go buy a chip and stuff to get a firewire port so i finaly i get it all finshed installed in my computer but then i go to my SONY vegas 8.0 and go to capture and it cant fine my device i dont know what to do can you help me out????

Thankss!
/ message
Dec 27 2007 10:17PM
0 0
profile picture
Billek
Posts: 5665 - Karma: 98
does your computer know it has the fire wire port? try updating the drivers too.
Dec 27 2007 10:46PM
0 0
profile picture
Kgallacher
Posts: 736 - Karma: 471
is it the wire?beaucse one kid said htat the wire that came with it didnt work..?????
Dec 27 2007 10:47PM
0 0
profile picture
Alex_thedroog
Posts: 3433 - Karma: 2
it shouldn't be the wire.  like said try updating your drivers.  if that doesn't work give reinstalling it a try.
Dec 27 2007 10:49PM
0 0
profile picture
Kgallacher
Posts: 736 - Karma: 471
how do i update the drivers????
Dec 27 2007 10:57PM
0 0
profile picture
Kgallacher
Posts: 736 - Karma: 471
BUMP
Dec 27 2007 11:14PM
0 0
profile picture
Alex_thedroog
Posts: 3433 - Karma: 2
control panel-administrative tools-computer management-device manager

then to the right you will see all of your devices.  look for the one labeled IEEE 1394 Bus host controllers, or something similar.  expand it and you will see your card.   right click and you will get a drop menu.  from there click update drivers.
Dec 28 2007 12:33PM
0 0
profile picture
Kgallacher
Posts: 736 - Karma: 471
but to update a driver it says i need a like CD or soemthing but ya i dont have one im so confused.....also it says this in general for location PCI Slot 1 (PCI bus 1, device 0, function 0)  what does that mean
Dec 28 2007 2:45PM
0 0
profile picture
Alex_thedroog
Posts: 3433 - Karma: 2
look up the manufacturers website and see if you can download any software for it. 
and for the pci slot 1 it looks like it is saying that there is nothing in that slot, or your firewire card might not be plugged in properly.  if you did it yourself you have to push it in quite a ways.  I though I was going to break it at first.

tell me if that helps.
Dec 28 2007 6:42PM
0 0
profile picture
Kgallacher
Posts: 736 - Karma: 471
ok so i got the car working and so on thats fine and such but when i go to capture nothing comes up so i called the place where i bought it and  the guy said 9 times out of 10 it is the cord beaucse its so frgile and so on but ya any more tips on what it could be??
Dec 28 2007 6:46PM
0 0
profile picture
Alex_thedroog
Posts: 3433 - Karma: 2
I can't really think of anything else right now.  I would try a new cord, and if that doesn't work it could be your camera.
Dec 28 2007 8:34PM
0 0
All times are Eastern (-5)