Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
How much DIN is too much DIN?
Posts: 349
-
Karma: 10
So i bought new invaders this year and was given a set of 4FRNT deadbolts 614. had them mounted up but they set them at 7 din, i am 5'11" 135lbs with 7.5 boot size. is 7 too much?
Posts: 6192
-
Karma: 41
seems right to me.. there i a chat that they follow that includes your height,weight, bsl and so on, its pretty in depth
Posts: 4465
-
Karma: 1,535
there's never enough DIN
uhhm actually, i'd leave em. if they end up popping off when you dont want them to. turn em up. and vice versa. thats what i did
Posts: 2274
-
Karma: 4,101
when they break your knees... that's too much
Posts: 7404
-
Karma: 39
until you blow your knees...
Posts: 349
-
Karma: 10
there are chats??! i am a no0b so didn't know, but just got worried about it!
Posts: 6384
-
Karma: 953
I think 7 is actually a pretty good setting for you, tight enough that they won't pop when you land a bit off balance, but loose enough that it should come off when you bail.
Posts: 1049
-
Karma: 10
weighing 135 and going hitting kickers with dins of 14 or 15 is a recipe for disaster,
7 sounds right but you just have to find out what din you feel comfortable with
Posts: 349
-
Karma: 10
alright sounds good. wasn't sure but didn't want a disaster. appreciate it thanks
Posts: 1541
-
Karma: 22
Posts: 2664
-
Karma: 997
ski them, if they come off when u try to butter or just landing hard, turn the toe up to 8 and leave the back at about 7.25-7.5. if they still come off turn each up by a half at a time until ur secure. i wouldn't go any higher than 10 unless ur a really really good.
Posts: 5540
-
Karma: 430
Not for Jon it isn't. When I think about that, that is a hell of alot of DIN even for his size.
Posts: 16909
-
Karma: 4,686
keep them where they are and if you feel like your straining your knee lossen it a little, if y think you are oming out when you should not tighten it up a half notch, and keep doing that untill it is perfect.
Posts: 147
-
Karma: 15
it seems that i set my din too low because i have a operation on my right thumb tomorrow because my ski hit it hard after a 7 with a nice landing but the binding released instead of holding my boot in - i have the 4frnt deadbolts 412 and i weigh about 170 - i set my din little bit over 9 - seems that i should go with a higher din!???
Posts: 338
-
Karma: 18
if your skis release then you don't have enough din. I normally ride @ 11 but i weight 180lbs
Posts: 349
-
Karma: 10
alright well this will be an experiment with the deadbolts then bc i have never riden with it set that high. (7)we will see!!
Posts: 4801
-
Karma: 868
that sounds like its in the ball park. If the shop set it i would trust it. If you're really worried about it, turn it down to 6 and slowly crank them up until they don't prerelease.
All times are Eastern (-5)
