Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
How far would this boot you?
Posts: 4572
-
Karma: 936
How far would you go if you hit a backcountry booter that was 5ft tall, 10ft wide and maybe about 6-8ft long? Also, tell me if I should make it bigger cuz we wanna go big off this jump
Posts: 5665
-
Karma: 98
It depends on what the landing is but I am going to randomly guess 30-40 feet.
Posts: 4572
-
Karma: 936
the landing is super long
Posts: 2839
-
Karma: 149
how much of a lip, how much speed, down a hill right after?
Posts: 6651
-
Karma: 1,286
im guessing between 5 feet and 150 ft
Posts: 3414
-
Karma: 20
Exactly. Maybe even a little further.
Posts: 10437
-
Karma: 84
pictures always seem to help
Posts: 15174
-
Karma: 480
well seeing as the only things that really affect your trajectory are speed and launch angle.... your jump means nothing... but here's a rule of thumb... since you gotta have tranny into a jump, the higher angle you want to have, the bigger the jump. In an idea world, a 45 degree takeoff provides the maximum height to distance ratio, usually booting you the highest. But, you can't make it a steep booter on a flat landing, although a flat boot on a steep landing works fine. Then, all that is left is speed. the faster, the further you go.
In short, for anyone who got confused:
45 degree takeoff + max speed = going big.
Posts: 1112
-
Karma: 28
yea somewhere in that range
Posts: 1320
-
Karma: 86
Posts: 96
-
Karma: 12
take it slow the first time and find out for yourself
Posts: 12020
-
Karma: 9,475
how much wu-tang did you put on it?
Posts: 6651
-
Karma: 1,286
Posts: 7436
-
Karma: 1,538
should make it longer and higher
Posts: 1663
-
Karma: 3
why are you asking this? why dont you just test it????????????????????
anyway, congrats on the booter
Posts: 4572
-
Karma: 936
cuz i haven't built it yet. Were making it tomorrow.
Posts: 2804
-
Karma: -5
well he already has the launch angle. he said it was 6-8 feet long and 5 feet tall. so you use tan^-1(5/6-8) and you get your launch angle. And i think he means at like a regular reasonable speed, if that size jump was in a park how far it would go. Im gonna say 30 feet.
Posts: 1663
-
Karma: 3
my bad
anyway, since you said there is a big landing already, i would not make it that big, prolly 3 feet high only that way you can vary your height and distance greatly with different amounts of speed. if you make it bigger, then you wont be able to start small
Posts: 10740
-
Karma: 7,816
Posts: 11295
-
Karma: 502
sounds like you have an itty bitty short transition. might want to make it longer, and ultimately, taller
Posts: 1597
-
Karma: 17
its usually pretty obvious where you are going to land when u build one but, if you need to ask you probably shouldnt hit it
Posts: 2101
-
Karma: 10
ten feet wide is huge, bro
id make it a little higher/longer and less wide unless youre planning to be carvin off it like a motherfucker
Posts: 518
-
Karma: 11
send a sled with a bunch of snow on it from the start and measure how far it goes. You should be around that.
Posts: 8761
-
Karma: 139
Posts: 8761
-
Karma: 139
find out the angle of launch and the approximate take off speed and you should be able to figure that out. before that i can't help you
Posts: 2946
-
Karma: 49
i say speed will determine how much distance youll go plus how much u pop off the lip. that always gives u an extra boost. goood luck post a vid on here of it
Posts: 443
-
Karma: 10
Posts: 155
-
Karma: 13
Posts: 551
-
Karma: 27
all i got to say is make it biger no matter whast size u make it
Posts: 1304
-
Karma: 335
its not that hard youl know when your buolding it, if theres a long landing then it wont even be scary to gunea(sp) it and you cna just take it from there.
Posts: 934
-
Karma: 37
I heard if you wax the lip youll go farther
Posts: 4185
-
Karma: 20
Posts: 4572
-
Karma: 936
Posts: 958
-
Karma: 23
make sure its not to suden or you will fuck up
Posts: 102
-
Karma: 10
It all depends on the speed.
Posts: 1508
-
Karma: 16
just sack up and guinea pig it with a measuring tape in hand
Posts: 9366
-
Karma: 445
you would go at least 100 feet
Posts: 716
-
Karma: 17
Uhhh if you wanna go big, and know how to go big I think you would know what you need to actually make a jump. its not hard
Posts: 41
-
Karma: 10
we built one that was about 6 feet and you could take it deep to 100 or so, it was only about a 50ft gap to clear the flat it all depends if theres a lip and how you hit it
Posts: 0
-
Karma: 7,704
the width doesn't matter at all.
Posts: 665
-
Karma: 24
he didn't want to feel like a dumb ass he just wanted to know how far he might go no need to hate on him
Posts: 1902
-
Karma: 12
Posts: 5977
-
Karma: 3,549
man, i didnt realize any one else said that
Posts: 646
-
Karma: 15
why would u ask this maybe a inch
Posts: 12019
-
Karma: 126
make sure its a much smoother tranny than you think you need, that way you can come in hot without the kick sending your knees into your chest
Posts: 4846
-
Karma: 661
yah depends on angle and heihgt and how much speed you want for your trick if you wanna do flips i wuold say you want it steeper
Posts: 1560
-
Karma: 12
not true. your maths is sound but hardly any ramp in the world is perfectly flat, for example trying to apply tan/sine what ever to a spine or even a quarter pipe, it isnt gonna work, because it isnt flat all the way up the ramp.
Posts: 4846
-
Karma: 661
hah yah true thats basic 11 physics
Posts: 12020
-
Karma: 9,475
yeah man "wu-tang" on the jump,, thats like way old skool west coast slang man,,, or just "tang"
Posts: 10905
-
Karma: 60
good one bud.
but honestly it all depends on the speed, also if it is too big you will lose speed on it, bigger jump doesnt always mean more airtime. if you want to go farther make it a lower angle if you want it to kick you put it at a higher angle. i dont really know why i am explaining this to you...its pretty standard.
All times are Eastern (-5)
