Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Problem with bindings

profile picture
pnsski
Posts: 699 - Karma: 10
my one binding seems to be a little lose... if im clicked in and i lift one ski it feels solid and wont move but then i lift the other ski and it will jiggle just a little bit its not a lot.. it wont effect my skiing its just annoying and hoping it doesnt get worse... would turning up the din or anything else fix this little bit of looseness :(
Jan 25 2007 12:02AM
0 0
profile picture
pnsski
Posts: 699 - Karma: 10
help i was jiggling my ski all night and i was getting frustrated
Jan 25 2007 12:07AM
0 0
profile picture
titsLOL
Posts: 7485 - Karma: 396
forward pressure might help, but changing the din wont. forward pressure is changed with the screw in the back of the heel piece like on the plate. or that's how it is on my rossis, not sure about other types. weird that they'd be set differently though. Next time you're at the mountain just pop into the shop before you ride and ask them to check it out it should take them like 40 seconds to fix it unless the bindings are broken.
Jan 25 2007 12:13AM
0 0
profile picture
pnsski
Posts: 699 - Karma: 10
i got rossi axial 120s so its the screw in the dildo piece or on the lower part of the back
Jan 25 2007 12:15AM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
The top screw adjusts DIN, the small lowere one adjusts forward pressure.  Adjust it until it is flush to .5mm out from the plate, then take out your boot and repeat until it doesn't move anymore.
Jan 25 2007 12:18AM
0 0
profile picture
titsLOL
Posts: 7485 - Karma: 396
^
Jan 25 2007 12:19AM
0 0
profile picture
pnsski
Posts: 699 - Karma: 10
and newschoolers does it again... well actually you two guys but thanks
Jan 25 2007 12:21AM
0 0
All times are Eastern (-5)