Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Adjusting rossi scratch / look bindings
Posts: 473
-
Karma: 41
I have rossi scratch bindings and need to adjust them to my new boots. Every other pair of bindings I have ever owned, I just use a skrewdriver to lift up a little metal notch and slide the binding forward or back. Either I am doing something wrong, or these bindings are not made for this. The din is fine, I just need to adjust these about 2mm. Thanks for any help.
Posts: 1249
-
Karma: 22
take a flat head screw driver to the back
Posts: 473
-
Karma: 41
tried that, that way has worked with every other pair of bindings I have ever adjusted. Maybe they are just being tough
Posts: 473
-
Karma: 41
I got it, they were just being tough. I used the back of a hammer.
Posts: 1969
-
Karma: 39
You need a posi (large phillips) there is a screw at the base of the heelpiece. Screw it clockwise to go forward (smaller), counter clock to go back (bigger) once you can click your boot in, adjust the same screw so that the back of the screw is flush (even) with the housing on the back of the binding. This is for the old pivot style - is that what you have?
All times are Eastern (-5)
