Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

My wicked awsome dope crunk dank rails.

profile picture
BigJew
Posts: 6974 - Karma: 78
I finally got around to welding my rails, I did 90% of the welding and cutting, and Scott and David painted 1 of them and welded one leg.

It's a 22ft flat rail with a little 2ft kink thing at the beginning and a 24 foot flat down flat rail. The Flat rail is 2.5 feet of the ground and the F-D-F rail is 3 feet at the top and 1 at the bottom with a 15 degree angle.

Click for larger image

Click for larger image

Click for larger image

19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
Click the pictures to make them bigger and the whole project cost about $250 for the 85 feet of metal.
19 years ago
0 0
profile picture
s.jeff
Posts: 2255 - Karma: 32
holy mother of sexy those are dope im gunna come ski at your house ....... me and collin just started working on are rail/box type thing and my uncle is making us 2 metal rails with his welding skills... probly a DFD and somthing else
19 years ago
0 0
profile picture
s.jeff
Posts: 2255 - Karma: 32
the rail/box type thing we are making is 13 ft it a flat bar and is going to be like 2.5- 3 ft tall. and then our lil box we had from last year will be an up rail wich will be a fun lil jib.
19 years ago
0 0
profile picture
*DrewT*
Posts: 7768 - Karma: 481
Those are sick Eric
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
i am going to say at your house for a for like a week and we are going to ski your rails
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
where did you get the metal? and did you mig weld those?
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
I got the metal from Industrial Metals in Red Deer and I welded it with a $150 garage sale arc welder that we've had forever.
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
arc weld?... seems alittle thin for arc but whatever. If i bought some metal could i use your arc welder
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
i say we should have a ski party at erics house this year every one should bring a rail and it will be better then canyon but erics house right no is already better then canyon
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
ive gotta come to red deer more often.
19 years ago
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
I Am Officialy Declaring A Eric Zillinger Invitational
19 years ago
0 0
profile picture
Gavinator
Posts: 522 - Karma: 10
those are sexy
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
If you bought the metal you could use our welder, but you'd probably have to weld it at our house unless you have one of those really big power plugins. Also, princess auto will get you an arc welder for 100 bucks.

Whenever we get snow I'll get all you guys over to my house, you can only come if you bring me something fricken' tasty to eat though.
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
ill bring some magic brownies
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
i will bring the drinks
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
are you good at welding eric
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
I did the entire thing myself so I guess I'm pretty good at welding. I'm nowhere near as good as Taylors dad would be but I get the job done and the rails are really sturdy.
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
yeah that looks like you did a sick job cant wait to ski them i am going to tell the weather man to make it snow right now
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
those drinks better contain a minimum alcohal level of whatever the numebr beer is/
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
5%, but why would you want to ski under the influence, it takes the fun out
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
Or maybe it adds more fun? Why don't you stop combing your mustache and getting tickled by your daddies beard and go try it?
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
word i agree
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
hey i am a loner
19 years ago
0 0
profile picture
*DrewT*
Posts: 7768 - Karma: 481
yay
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
lets see you try and land a three while drunk
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
I'm not saying it's a good idea, I'm just saying you should try something before you hate on it.
19 years ago
0 0
profile picture
Gavinator
Posts: 522 - Karma: 10
i want magic brownies
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
haha, TAKE THAT paul... anyways they are rails paul not jumps so, it would be more like 270 or 450 than 360...jeeze stupid. it going to snow this week in calgary and its high of 6 tomorrow, high of 3 for thursdya nad friday.
19 years ago
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
ya i heard a little bit about it supposed to be raining this week to too. But the i listened to the radio and it said that it would just rain



oh ya and eric i wannna be the first one to clean your rail
19 years ago
0 0
profile picture
*DrewT*
Posts: 7768 - Karma: 481
I wanna be the first person to 270 on switch up pretzel 270 out both of your rails eric
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
ok i c what your saying
19 years ago
0 0
profile picture
Gavinator
Posts: 522 - Karma: 10
ya
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
to bad.
19 years ago
0 0
profile picture
*DrewT*
Posts: 7768 - Karma: 481
That one's gonna take some practice
19 years ago
0 0
profile picture
T.Fern
Posts: 501 - Karma: 11
You should seel them to canyon
19 years ago
0 0
profile picture
Corkster
Posts: 2622 - Karma: 10
what did u cut the steel with?
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
I cut them with a chop saw. But at industrial metals they'll cut it for you if you don't have a saw. I want to go to Canyon and ask them if they'll pay for the metal then I'll weld some rails for free.
19 years ago
0 0
profile picture
Park_Rider_435
Posts: 834 - Karma: 9
yeah that would be sick exept for the some of the gay snowboarders will like screw something up about them
19 years ago
0 0
profile picture
T.Fern
Posts: 501 - Karma: 11
what rails should i get this year?
19 years ago
0 0
profile picture
BigJew
Posts: 6974 - Karma: 78
How long is your yard? You guys all have tiny ass yards.
19 years ago
0 0
profile picture
garettnorthey
Posts: 3049 - Karma: 173
^ Not I
19 years ago
0 0
profile picture
T.Fern
Posts: 501 - Karma: 11
its not that long but its ok for 1 rail
19 years ago
0 0
profile picture
r.w
Posts: 3489 - Karma: 18
use the alley
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
c rail
19 years ago
0 0
profile picture
Corkster
Posts: 2622 - Karma: 10
pauls yard is fairly big
19 years ago
0 0
profile picture
p-a
Posts: 1308 - Karma: 10
yeah, i sorta have a rail to but no inramp, i think i might drop off my shed thou
19 years ago
0 0
profile picture
Corkster
Posts: 2622 - Karma: 10
just weld yourself up one like we have
19 years ago
0 0
All times are Eastern (-4); Currently it's 7:54AM